PST Mod - Added a Saw Blade
-
Comparison with the Surge and Charge saws and a picture of the doner PST
Pete
-
Very nice

I would most definitely squeeze that baby into my EDC -
Nice mod mate. I do wish there were more bladless MTs out there, not for any legal issues over knives, but more because you can then cram more tools in. :)
-
Excellent mod! And I've got a couple of spare PSTs from airport sales kicking around. And this wouldn't require powertools. I might have to do this.
And just so I know I'm looking at the right parts, this guy is your saw, right? http://www.sogknives.com/type/accessories/double-tooth-saw.html
Oh, and maybe I could get the 1/4" adaptor in there. A few fewer screwdrivers out, and a lot more screwdrivers and sockets in! http://www.sogknives.com/type/accessories/1-4-drive.html
So, which way is Oregon from here... HEY! LEATHERMAN, YEAH, YOU GUYS! LOOK AT THIS! MAKE THIS, NOT SMURF!
-
@Taxi Dad said:
Very nice
I would most definitely squeeze that baby into my EDCIt is my EDC at the moment and it is working pretty well. I don't have a need for a bigger tool and the thinner profile makes belt carry not even noticeable. I have not needed to use the saw, I might just do a test at home :D
@Gareth said:
Nice mod mate. I do wish there were more blade less MTs out there, not for any legal issues over knives, but more because you can then cram more tools in. :)Indeed, more tools are a bonus. I can just imagine removing the blades from a SuperTool (sacrilege I hear you say :D) and see what can be crammed in there!!!
@ironraven said:
And just so I know I'm looking at the right parts, this guy is your saw, right? http://www.sogknives.com/type/accessories/double-tooth-saw.htmlYip, that looks like the one. I think SOG definitely has the edge with customizing a multi-tool. I have not looked at all the SOG parts though, I do like that 1/4" drive.
Thank you all for the kind words.
Cheers,
Pete
-
@ironraven said:
So, which way is Oregon from here... HEY! LEATHERMAN, YEAH, YOU GUYS! LOOK AT THIS! MAKE THIS, NOT SMURF!Just think, if Leatherman sold parts, THAT THEY ALREADY MAKE for say $6-$15, instead of R&D and manufacturing of their one piece tool crap, wouldn't there be more profit in that?
-
Pietervn - Just got a PST II and the Sog saw should be arriving in a few days so that I can try this mod. Thanks for the detailed instructions! In your first post you mentioned "The saw is slightly thinner than the knife blade, but adding a washer from the file's side sorted that problem out". Did this result in too much space / loose tools on the file's side, as I assume the washer was there for a reason? Also, did you put the washer between the saw and the arm, or the saw and the next tool?

-
G'Day Mate,
>>Thanks for the detailed instructions!
You are very welcome>>Did this result in too much space / loose tools on the file's side
I had an extra washer from an old tool that I disassembled a while ago which was used to go next to the saw blade. The file still has both washers on either side of it.The file on the PST and PST II needs a spacer/washer on either side to stop it from rubbing (filing in essence) against the inside screw driver and outside handle. Some of the earlier PST II's had only a single washer on the screw driver side and none on the outside. This was corrected later during the evolution of the tool. I am not sure when exactly this was added.
>>Also, did you put the washer between the saw and the arm, or the saw and the next tool?
The washer is between the saw and the awl. On the PST II it will be next to the scissors.HTH, let me know if you have any more questions.
Cheers,
Pete
-
@ironraven said:
And just so I know I'm looking at the right parts, this guy is your saw, right? http://www.sogknives.com/type/accessories/double-tooth-saw.htmlOR... you could get the same thing from here: http://www.smkw.com/webapp/eCommerce/products/Multi-Tools/H-D+Saw+Blade+for+Multi-tool/CP42TL.html much cheaper. Only problem is it says "Harley" on it.

-
Just swapped the saw in to a PST II. Had some trouble remembering where the scissor washer went but pretty easy otherwise. Reshaped the saw using a Dremel grinding wheel going really slow and it worked well.
This thing is awesome! Carries in the pocket better then a 4 layer SAK and as good of a tool set as a 6 layer (with way better pliers and inline Phillips). Folder clipped to the waist of my jeans is pretty much unnoticeable and i like carrying it. VERY happy with this combo!
If anyone is looking for a bladeless MT, I think this is the way to go.
Great mod Pietervn!


-
That looks very Cool.
Congrats on a handy tool!!
Pete
-
Very nice work! I wonder if this would work as well with one of my beloved Sideclips...
-
G'Day,
It depends on what you want to put in. A standard PST length blade is to long, I wanted to do this swap between PST and Sideclip.
I'm not sure about the file or a saw, will check and get back to you. I suspect not.
Cheers,
Pete
-
@Sheradin said:
Very nice work! I wonder if this would work as well with one of my beloved Sideclips...G'Day,
I had a look at the Sideclip, have not taken it apart though.
I don't think it will be possible here is why:
I used a PST II blade for comparison, it is longer than the Sideclip's one and will rub against the plier-head when the tool is closed. It is also slightly thicker. The spacer on the Sideclip next to the blade will need to be removed and replaced with a thinner one.On the other side I took a PST file to put in where the small flat head screwdriver is: The file is thinner than the screw driver, thus again some spacing needs to be done. But more importantly, it is to long and will again touch the plier head.
So in short, not a straight forward swap like the one we did above. Sideclips are a bit special ;)
Cheers,
Pete
-
@HarleyXJGuy said:
We all know anything with the word Harley in it is cool.Indeed it is!!!

-
Had I saw this thread I might not have been so quick to cut the saw so small on mine
:D I have another and may go this route 
-
Had I saw this thread I might not have been so quick to cut the saw so small on mine
:D I have another and may go this route 
It is not easy adding material back to a over zealous cut... Does it flex under usage?
I actually used it to cut a sizeable limb out of a tree (perhaps an inch and a half through
) and it performed very well
No flex at all
I only would change this to make it a bit easier to get the saw out, it is fine now shape wise but if there wasn't a nail nick then I wouldn't be getting it out of the tool very easy :ahhh :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login