Wingman vs. MP400?
-
I was surprised to see these two pitched against each other. I'd agree with the comparisons though. My preference would certainly ge for the Mp400, or more specifically, my knifeless version (though I'd choose the MP400 if limited to stock models too)
I can understand why the Wingman might be preferred by some, but for me the pliers ergonomics negate any benefits from pocket clip and OHO blade. It's a shame, as I find everything else on the Wingman quite usable apart from the pliers :-\ (though I'd still prefer the drivers to lock and the blade to be a slippie :D)
-
-
Spirit is probably the finest MT ever made up to this day, but I never carry it, so it doesn't help me at all.

-
Interesting comparison Lynn. Like everyone else I'd keep my MP400 over a Wingman in a heartbeat. Not, I hasten to add, that I hate the Wingman and Sidekick as mush as some folks do, like you I really do think they have their own merits.
-
@Kampfer said:
Spirit is probably the finest MT ever made up to this day, but I never carry it, so it doesn't help me at all.
Yeah, left at home is never a great feature :D
Have you considered a Nite-ize clip? I think a few people have done this (don't know how much it would screw up the ergos though).
@Gareth said:
Interesting comparison Lynn. Like everyone else I'd keep my MP400 over a Wingman in a heartbeat. Not, I hasten to add, that I hate the Wingman and Sidekick as mush as some folks do, like you I really do think they have their own merits.The first time I saw the Wingman and Sidekick in the flesh, I was actually quite pleasantly surprised. It was only when I actually tried using the pliers rather than just holding the tool that I realised how uncomfortable (highly splayed with pokey corners) the pliers were. If they'd have only fixed that one thing, my views on it could have been quite different
-
Wingman by an edge. But drop the pocket clip and its mp400. Ease of carry plays a big part. The 400 sheath is terrible. The 400 scissors cut much better. Drivers are easier to use on the wingman but you get more assortment on the 400. Wingmans pliers are more robust but that doesnt mean the 400's are a push over. They are just smaller. Overall it is close. Great thread

-
@Demel said:
Wingman by an edge. But drop the pocket clip and its mp400. Ease of carry plays a big part. The 400 sheath is terrible. The 400 scissors cut much better. Drivers are easier to use on the wingman but you get more assortment on the 400. Wingmans pliers are more robust but that doesnt mean the 400's are a push over. They are just smaller. Overall it is close. Great thread
Interesting viewpoints.
What makes you say the Wingman pliers are more robust? In my eyes they are less durable than the MP400 's due to the hollow construction around the pivot to get the spring in. Are you referring more to the tips, or overall build?
Similarly on the drivers, what makes you feel the Wingman's are more usable? Better fit on the screws you encounter, or something else? I do like knowing the MP400 ones lock and I can use a bit adapter.
I'm not trying to pull you up on these issues, just trying to better understand your thoughts, as they contrast with mine somewhat. It's always nice to understand why someone thinks differently.
-
@50ft-trad said:
Wingman by an edge. But drop the pocket clip and its mp400. Ease of carry plays a big part. The 400 sheath is terrible. The 400 scissors cut much better. Drivers are easier to use on the wingman but you get more assortment on the 400. Wingmans pliers are more robust but that doesnt mean the 400's are a push over. They are just smaller. Overall it is close. Great thread

Interesting viewpoints.
What makes you say the Wingman pliers are more robust? In my eyes they are less durable than the MP400 's due to the hollow construction around the pivot to get the spring in. Are you referring more to the tips, or overall build?
Similarly on the drivers, what makes you feel the Wingman's are more usable? Better fit on the screws you encounter, or something else? I do like knowing the MP400 ones lock and I can use a bit adapter.
I'm not trying to pull you up on these issues, just trying to better understand your thoughts, as they contrast with mine somewhat. It's always nice to understand why someone thinks differently.
No problem. As far as pliers go overall build is more robust. Larger gripping area, the tips are a bit more precise, the cutters are stronger than they appear. They dont do as well with stranded wire but i cut down some spring nuts with ease. Very shocking to me.
With the drivers they are more comfortable in hand to use. You can seperate the handles on the wingman if need be, but with the 400 you are stuck with the box. Not bad, just inherent in the design.
Like I said it is very close. Ask me next week and I may say the 400 all the way. Tough call. Hope that helps
-
I think you know my thoughts on the matter. MP400/600 are the best multipliers hands down

-
@50ft-trad said:
Wingman by an edge. But drop the pocket clip and its mp400. Ease of carry plays a big part. The 400 sheath is terrible. The 400 scissors cut much better. Drivers are easier to use on the wingman but you get more assortment on the 400. Wingmans pliers are more robust but that doesnt mean the 400's are a push over. They are just smaller. Overall it is close. Great thread

Interesting viewpoints.
What makes you say the Wingman pliers are more robust? In my eyes they are less durable than the MP400 's due to the hollow construction around the pivot to get the spring in. Are you referring more to the tips, or overall build?
Similarly on the drivers, what makes you feel the Wingman's are more usable? Better fit on the screws you encounter, or something else? I do like knowing the MP400 ones lock and I can use a bit adapter.
I'm not trying to pull you up on these issues, just trying to better understand your thoughts, as they contrast with mine somewhat. It's always nice to understand why someone thinks differently.
No problem. As far as pliers go overall build is more robust. Larger gripping area, the tips are a bit more precise, the cutters are stronger than they appear. They dont do as well with stranded wire but i cut down some spring nuts with ease. Very shocking to me.
With the drivers they are more comfortable in hand to use. You can seperate the handles on the wingman if need be, but with the 400 you are stuck with the box. Not bad, just inherent in the design.
Like I said it is very close. Ask me next week and I may say the 400 all the way. Tough call. Hope that helps
Thanks for the additional info. I'll have to dig mine out to understand your perspectives I think.

-
I clip the Wingman into the 5th pocket of my jeans. I bike everywhere when weather permits and it has never come close to slipping out. For me that's pretty secure.
-
@50ft-trad said:
Spirit is probably the finest MT ever made up to this day, but I never carry it, so it doesn't help me at all.

Yeah, left at home is never a great feature :D
Have you considered a Nite-ize clip? I think a few people have done this (don't know how much it would screw up the ergos though
I had a clip made for Spirit, works well but it still doesn't get carry, I like my MT to also be a OHO pocket knife.
-
@captain spaulding said:
I'd put the MP400 clear above the Wingman outside of aesthetics. The Wingman clip and rounded shape is a big improvement over the MP400 and works great for pocket carry.
But for actual real use, give me an MP400 any day.
In my opinion the Wingman clip would be a improvement if it actually had any retention at all. Basically how all Leathermans with clips are. I have never had a Leatherman with a clip that has left me feeling confident the tool will not just slip right out of my pocket. The Sideclip is the closest though.
I find that with many MTs and knives, you have to remove the pocket clip and bend it inwards a little, then reattach. You can get as much, or al little retention as you want that way.
I know, you shouldn't have to adjust it. But that's the reality.
-
@captain spaulding said:
I'd put the MP400 clear above the Wingman outside of aesthetics. The Wingman clip and rounded shape is a big improvement over the MP400 and works great for pocket carry.
But for actual real use, give me an MP400 any day.
In my opinion the Wingman clip would be a improvement if it actually had any retention at all. Basically how all Leathermans with clips are. I have never had a Leatherman with a clip that has left me feeling confident the tool will not just slip right out of my pocket. The Sideclip is the closest though.
I find that with many MTs and knives, you have to remove the pocket clip and bend it inwards a little, then reattach. You can get as much, or al little retention as you want that way.
I know, you shouldn't have to adjust it. But that's the reality.
I adjust ALL my clips on EVERYTHING I own (with a few exceptions). It makes no significant difference (for me) for any of the multitool clips.
-
I've had a few tools try and escape on me too. Simply no traction on the handles. I tend to "deep carry" tools for this reason. The worst offender by far is my favourite torch (Sunwayman V10R) which ought to have been called Sunwayman Houdini :ahhh I've had several close shaves with that one

Exceptions: Sideclip and Neutered Octane - maybe due to being slim, or maybe due to their lighter weight, these don't seem to misbehave too much.
Wave does try to escape, but I now tend to deep carry when moving around, but raise to clip carry when on a job where the tool is likely to be used.
-
MP400 for the win. The build quality's better, locking drivers, better scissors, more comfortable to use. I've had the Phillips driver on the Wingman/Sidekick fold up on me too many times. >:( As a lefty, OHO doesn't work right for me on MT's, so any potential advantage there is lost. Plus, you can't flick a Wingman open..... :D
-
I'll go Wingman. I just like it better.
-
Great comparison and analysis, Lynn.
I have them both, and like them both. But in the end, I prefer the Wingman for actual use. Why?
Of the screwdrivers, the large flat head is the one I reach for most. It's bigger and better on the Wingman. (Despite the lack of a lock)
The blade and scissors are my most-used tools, and they are the most accessible. I also find it unforgivable that the tip of the MP400 blade is always dull, due to a design flaw I which it slams against the inside of the handle when closed. The sprung pliers are the icing on the cake. Everything else is secondary, to me.
The MP400 is loads more fun to fiddle with though.
I think I'm gonna do a face-off video between them soon. Keep your eyes peeled. ;-)
-
I'd take the MP400 over the Wingman. I don't trust Leatherman's quality control, and the design of the Wingman is lacking.
-
While I would definitely choose the Gerber, I think it's fair to say how much I admire the Wingman. It's drivers may be a little awkward, but it's package opener has been indispensible to me. I also like the OHO blade and its scissors while not the best, are pretty good for certain small cutting tasks.
The Wingman is an excellent multitool, it's just not as good as the MP400

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login