Maintenance Multi-tool
-
I'd say Leatherman Surge. The steel isn't the greatest from their range but it's still pretty damn good. It's a bigger tool with a bigger knife and replaceable wire cutters.
Sent from my SM-N9005 using Tapatalk
-
I'm a bit late to the party but I'll answer anyway.
I'm currently working as a Maintenance Engineer, and I want to warn you against relying solely on a Multi, or even heavily relying on a multitool. While I do carry a Leatherman Rebar every day, it only sees use when I don't have my tool bag with me. That is often, but not for anything heavy. I beat the hell out of it when I use it, and it has come in handy a million times. That said, I do my best to always have my tool bag with me and I stock it with good, name brand(lifetime warranty), reliable dedicated tools.
This list is not too expensive, and will get you by for the majority of what you will need, if you can afford it and pack it all down there.
Klein 11-in-1 screwdriver(this one's absolutely necessary)
8 inch Channelocks/tongue and groove pliers
10 inch channelocks
8 inch crescent wrench
Small hacksaw
Nicholson mill bas-tard file with handle(believe me it's worth it to have a real one)
Cheap flat head screwdriver to use as a pry bar
insulated needlenose pliers
wire strippers/crimpers
Wire cutters
Klein Electrician scissors
Ratcheting screwdriver with bit set(less than $20 at home depot)
Folding razor knife(8 bucks at home depot)
Linesman pliers
some sort of Digital multimeter and a wiggy
Painters toolThis is a basic list, and it's less than half the tool bag I carry at work. Realistically, most of the time I get by just fine with only my Rebar, 11-in-1, 8 inch channelocks, and crescent wrench.
For a multi, I recommend the Rebar or Wave, as they are light enough to not be a bother when you are crawling around in some of the dank, cramped spaces you will inevitably find yourself in. The surge and ST300 are just too damn heavy for what they offer, if I want heavy duty I grab my dedicated tools.
If you go down there with nothing but a Leatherman Wave and a smile, you will end up miserable.
I feel I must throw this in: my department has about 18 Maintenance Engineers in it, and only three of us carry multitools. No one else bothers with them, they'd rather use dedicated tools.
-
That's a good list Sean, very similar to what I carried as a minimum. I preferred carrying a few separate screwdrivers and hex keys and not a 11-in-1, but that's a personal choice IMO.
I also agree that the idea of a 'heavy duty' MT being a must is a misnomer. A 4" MT like the Rebar, Wave, Flik or Spirit always performed well for the times I was caught without my tool bag and if they can't do the job then it's time to get the tool bag anyway.
-
@StephenAndMelissa Smith said:
[quote author=Lynn LeFey link=topic=62501.msg1165194#msg1165194 date=1444836236]
you might be able to try out the various tools we've recommended before purchase. This would let you know if the tool is comfortable in-hand, and at least give you minimal idea if its functions suit you.@Aloha007 said:
The Surge is not only big, it is heavy as well - some don't like this so it would pay to handle one first.@Gareth said:
I also agree that the idea of a 'heavy duty' MT being a must is a misnomer. A 4" MT like the Rebar, Wave, Flik or Spirit always performed well for the times I was caught without my tool bag and if they can't do the job then it's time to get the tool bag anyway.Thanks for the advice.
Today I was able to handle the Super Tool 300 and the Wave. While I really wanted to like the Super Tool/Surge size, it just didn't feel right in my hand as you warned. It probably would work, but it felt a bit clunky. It is pretty surprising that the Super Tool 300/Surge are 50% heavier for only an extra 1/2" (12.5%) of length, indicating the increased thickness as well.
-
@Mextreme said:
Leatherman Wave with a bit-kit without a doubt. central America is a mess with a mix of american and european standard for threads and screw heads. The bit kit contains both standards in a slim package.
The tool is globallly available , replacable and servicable and not inecessarily eye catching or expensive.
The serrated blade is practical to have as a back up if it wil be long between the possibilities to sharpen. The one hand opening blade can be practical as a last ditch defence option.Obi1shinobee & Metreme,
Thank you for your advice. It looks like you called it first. Tried the Wave today and really liked it.
The Wave handled nicely and fit naturally in my hand. I liked the rounded grips. I am a big fan of the OHO blades on the Wave as opposed to the ST300 or Rebar. It is noticeably lighter than the larger tools and has a slimmer profile which will make it better for EDC.
I haven't purchased yet, but plan to.
Metreme, What were you doing in central America?
-
@Mercury said:
I'm a bit late to the party but I'll answer anyway.I'm currently working as a Maintenance Engineer, and I want to warn you against relying solely on a Multi, or even heavily relying on a multitool. While I do carry a Leatherman Rebar every day, it only sees use when I don't have my tool bag with me. That is often, but not for anything heavy. I beat the hell out of it when I use it, and it has come in handy a million times. That said, I do my best to always have my tool bag with me and I stock it with good, name brand(lifetime warranty), reliable dedicated tools.
This list is not too expensive, and will get you by for the majority of what you will need, if you can afford it and pack it all down there.
Klein 11-in-1 screwdriver(this one's absolutely necessary)
8 inch Channelocks/tongue and groove pliers
10 inch channelocks
8 inch crescent wrench
Small hacksaw
Nicholson mill bas-tard file with handle(believe me it's worth it to have a real one)
Cheap flat head screwdriver to use as a pry bar
insulated needlenose pliers
wire strippers/crimpers
Wire cutters
Klein Electrician scissors
Ratcheting screwdriver with bit set(less than $20 at home depot)
Folding razor knife(8 bucks at home depot)
Linesman pliers
some sort of Digital multimeter and a wiggy
Painters toolThis is a basic list, and it's less than half the tool bag I carry at work. Realistically, most of the time I get by just fine with only my Rebar, 11-in-1, 8 inch channelocks, and crescent wrench.
For a multi, I recommend the Rebar or Wave, as they are light enough to not be a bother when you are crawling around in some of the dank, cramped spaces you will inevitably find yourself in. The surge and ST300 are just too damn heavy for what they offer, if I want heavy duty I grab my dedicated tools.
If you go down there with nothing but a Leatherman Wave and a smile, you will end up miserable.
I feel I must throw this in: my department has about 18 Maintenance Engineers in it, and only three of us carry multitools. No one else bothers with them, they'd rather use dedicated tools.
Mercury,
Thanks for the tool list. I will definitely be looking into these items.
-
@StephenAndMelissa Smith said:
I'm a bit late to the party but I'll answer anyway.
I'm currently working as a Maintenance Engineer, and I want to warn you against relying solely on a Multi, or even heavily relying on a multitool. While I do carry a Leatherman Rebar every day, it only sees use when I don't have my tool bag with me. That is often, but not for anything heavy. I beat the hell out of it when I use it, and it has come in handy a million times. That said, I do my best to always have my tool bag with me and I stock it with good, name brand(lifetime warranty), reliable dedicated tools.
This list is not too expensive, and will get you by for the majority of what you will need, if you can afford it and pack it all down there.
Klein 11-in-1 screwdriver(this one's absolutely necessary)
8 inch Channelocks/tongue and groove pliers
10 inch channelocks
8 inch crescent wrench
Small hacksaw
Nicholson mill bas-tard file with handle(believe me it's worth it to have a real one)
Cheap flat head screwdriver to use as a pry bar
insulated needlenose pliers
wire strippers/crimpers
Wire cutters
Klein Electrician scissors
Ratcheting screwdriver with bit set(less than $20 at home depot)
Folding razor knife(8 bucks at home depot)
Linesman pliers
some sort of Digital multimeter and a wiggy
Painters toolThis is a basic list, and it's less than half the tool bag I carry at work. Realistically, most of the time I get by just fine with only my Rebar, 11-in-1, 8 inch channelocks, and crescent wrench.
For a multi, I recommend the Rebar or Wave, as they are light enough to not be a bother when you are crawling around in some of the dank, cramped spaces you will inevitably find yourself in. The surge and ST300 are just too damn heavy for what they offer, if I want heavy duty I grab my dedicated tools.
If you go down there with nothing but a Leatherman Wave and a smile, you will end up miserable.
I feel I must throw this in: my department has about 18 Maintenance Engineers in it, and only three of us carry multitools. No one else bothers with them, they'd rather use dedicated tools.
Mercury,
Thanks for the tool list. I will definitely be looking into these items.
No worries.
I hope you like the Wave, it is a fantastic tool. If I wasn't so happy with my Rebar I'd EDC a Wave.
-
@StephenAndMelissa Smith said:
Leatherman Wave with a bit-kit without a doubt. central America is a mess with a mix of american and european standard for threads and screw heads. The bit kit contains both standards in a slim package.
The tool is globallly available , replacable and servicable and not inecessarily eye catching or expensive.
The serrated blade is practical to have as a back up if it wil be long between the possibilities to sharpen. The one hand opening blade can be practical as a last ditch defence option.Obi1shinobee & Metreme,
Thank you for your advice. It looks like you called it first. Tried the Wave today and really liked it.
The Wave handled nicely and fit naturally in my hand. I liked the rounded grips. I am a big fan of the OHO blades on the Wave as opposed to the ST300 or Rebar. It is noticeably lighter than the larger tools and has a slimmer profile which will make it better for EDC.
I haven't purchased yet, but plan to.
Metreme, What were you doing in central America?
Congrats on the Wave. I know you will be happy with it.
We set up a branch office working with industrial automation for central america (mainly Mexico). Not exactly maintenance but our customers were many time maintenance engineers and I experienced the mess between U.S. Imperial and European metric standards common in the area.
The Wave will be practical not only in your work but all the time. In Central America everything is not so well functioning or prepared, there are no easy opening products for example, and you will eat a lot of fresh fruit, bread and vegetables. it´s old style so the one hand opening of the main tools will be valuable.
Good Luck to you. You are in for a real adventure. -
While I suggested the Surge there's no denying the Wave is very capable. I got my Wave first then Surge and both are tremendous tools. The bit extender works on the Wave as well which will allow you to use 1/4in bits and the LM flat ones. This LM favorite should be a nice companion when your dedicated tool bag is far from you or you're trouble shooting.
All the best to you on your adventure.
-
Your love the wave

-
Another vote for the Wave. The bit hit and extension are extremely valuable and come in handy often.
Don't think I would try cutting fence wire with a wave though, or any multitool for that matter. I have horses so I am aware that fence wire needs a dedicated cutter.
Sent from my iPhone using Tapatalk
-
@StephenAndMelissa Smith said:
Leatherman Wave with a bit-kit without a doubt. central America is a mess with a mix of american and european standard for threads and screw heads. The bit kit contains both standards in a slim package.
The tool is globallly available , replacable and servicable and not inecessarily eye catching or expensive.
The serrated blade is practical to have as a back up if it wil be long between the possibilities to sharpen. The one hand opening blade can be practical as a last ditch defence option.Obi1shinobee & Metreme,
Thank you for your advice. It looks like you called it first. Tried the Wave today and really liked it.
The Wave handled nicely and fit naturally in my hand. I liked the rounded grips. I am a big fan of the OHO blades on the Wave as opposed to the ST300 or Rebar. It is noticeably lighter than the larger tools and has a slimmer profile which will make it better for EDC.
I haven't purchased yet, but plan to.
Metreme, What were you doing in central America?
I'm late to this thread and I'm sure others have given great advice but I'll throw in my opinion anyway.
If you get the Wave then be sure to also get the ST300 and the removable bit driver for it, you can thank me later.
Consider getting the Rebar and swapping plier heads with the Wave, gift the Rebar to another volunteer when you get over there.
-
The wave is great for EDC, but I would probably go with the Rebar over the wave as a maintenance tool, and carry another knife and probably electrician's scissors for when you need to cut things or do knife stuff. I suggest that whatever you get you should use it, a lot, before your trip so you get used to it and understand its limitations
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login