Recommendations for upgrade
-
Nothing in particular, really not sure, just so used to my wave, and definitely don't want to downgrade!! Need better wire cutters , better blades and saws , interchangeable bits and driver , everything else would be a plus
-
@Ifeexpert said:
Nothing in particular, really not sure, just so used to my wave, and definitely don't want to downgrade!! Need better wire cutters , better blades and saws , interchangeable bits and driver , everything else would be a pluswhat about the surge,newer version,replaceable wire cutters,bit adapter for metal saw and diamond file,sadly same steel for blade,but its a beast,was my favourite work mt
you can add other T shank saws 
-
@Ifeexpert said:
Nothing in particular, really not sure, just so used to my wave, and definitely don't want to downgrade!! Need better wire cutters , better blades and saws , interchangeable bits and driver , everything else would be a plusSounds like the surge is what you are looking for. Bit driver, blade exhanger, larger blade, huge outside accessible scissors. Go for it
-
Surge looks clean, and tough, there should be a store where they have nothing MT's on display so you can get a feel for them, not the same looking online, they all look super cool and want all of them

-
SideClip 8) :)
-
I remember I went for a Surge after Wave.
-
-
Aloha how's the BO handling?
A Surge is my Next goodie but I can't decide between BO or SS.
-
@NKlamerus said:
Aloha how's the BO handling?A Surge is my Next goodie but I can't decide between BO or SS.
My Wave actually is more worn. The Surge is holding up really well but I got a weird thumb print on it one day ( you can see it in the pic ). You can see the marks on my ST300 but not bad IMO. I feel the BO looks nice when worn. I also didn't get black hands from any of my BO tools. I got the Surge and ST300 new too.

-
After my Wave I upgraded to a Charge TTi, partly because I have a thing for anything Titanium, so far it has served me quite well. As others have mentioned if you want a "bigger" tool the SuperTool 300 is the way to go, but as far as something comparable to the Wave I would recommend the Charge ALX or one of the other Charges.
Just my two cents but let us know what you decide on! :)
-
Update:: still debating but it's between charge AXL (expensive) old surge with the eyeglass screwdriver bit holder, swisstool spirit looks tempting but I'm sticking to LM a lil longer.

-
@Ifeexpert said:
Update:: still debating but it's between charge AXL (expensive) old surge with the eyeglass screwdriver bit holder, swisstool spirit looks tempting but I'm sticking to LM a lil longer.
The Charge is my favorite LM (although in my case its the TTi).
**Old vs. New Surge: **Personally, I would go for the new Surge, I think the Surge is too heavy for the eye-glass screwdriver. What you can do is stick a Vic small screwdriver (or any small-screwdriver) in your LM bit-card and have a stand-alone mini-screwdriver which I think works much better.
Charge/Surge VS. Spirit: I think the two tools follow a different design idea. The Charge/Surge are more modular with bit holder (and blade-holder) whereas the Spirit is much more a stand alone tool (more like the Rebar).
The Spirit Offers:- Extra long tools with lots of reach
- Pry-Tool that deserves the name
- Chisel
- Medium scissors
- All outside tools
- Flat long design which I find more pocket-friendly
Charge Offers:
- Bit Holder (personally, I find it only useful in combination with the bit-extender)
- OHO Blades
- Diamond File
Surge Offers:
- Bit Holder
- OHO blades
- Big scissors
- Blade Exchanger (another tool that requires accessories. Best tool if you cut/file a lot of metal)
-
Surge, every time.
Or maybe a Spirit if you have a bad back.
-
I think the decision should be based on your usage (or simply take the Spirit :D)
Lots of metal filing/sawing: Definitely the Surge
**Mostly blade: **Charge for the OHO blade with higher quality steel
Lots of different bit sizes but fairly infrequent: LM with bit kit (small package)
Lots and often of different bit sizes on rusty screws: Vic with bit kit (standard bits are easier to replace)
All tools are used often Spirit for its all outside toolsOther factors:
Tool should be rust resistant: Spirit
Work in oily-slippery conditions: LM -
@Ifeexpert said:
Update:: still debating but it's between charge AXL (expensive) old surge with the eyeglass screwdriver bit holder, swisstool spirit looks tempting but I'm sticking to LM a lil longer.
To awl or not to awl that is the question?
-
@Ifeexpert said:
And lost a pivot screw which icant find replaecement for
Just the screw? Get a Rebar, use the screw and plier head (and awl if you like) to upgrade your Wave.
-
@Etherealicer said:
I think the decision should be based on your usage (or simply take the Spirit :D)Good stuff!!!!
Surge is on the way
so ill its up for trial,
But def next after surge will be spirit
.thankssaid:
And lost a pivot screw which icant find replaecement for

Just the screw? Get a Rebar, use the screw and plier head (and awl if you like) to upgrade your Wave.
Lots of metal filing/sawing: Definitely the Surge
**Mostly blade: **Charge for the OHO blade with higher quality steel
Lots of different bit sizes but fairly infrequent: LM with bit kit (small package)
Lots and often of different bit sizes on rusty screws: Vic with bit kit (standard bits are easier to replace)
All tools are used often Spirit for its all outside toolsOther factors:
Tool should be rust resistant: Spirit
Work in oily-slippery conditions: LMRebar? Are those plier screws or rivets? I really don't know, never had a rebar, but on pictures they look like rivets, but im willing to try just to save a wave life....
Thanks
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

