111mm SAK's
-
I've thought about getting a OH Trekker/Soldier and using that as my main MT and pairing it up with a pair of slip joint pliers and a pair of electrician scissors for plier and cutting duties. Any thoughts?
-
@ToolJoe said:
I've thought about getting a OH Trekker/Soldier and using that as my main MT and pairing it up with a pair of slip joint pliers and a pair of electrician scissors for plier and cutting duties. Any thoughts?Great idea! I have a 50 year old pair of lineman's pliers (given to me by my grandfather) that still cut better than either of my Leathermans. And, a Soldier '08 is now my heavy duty farm SAK.
But, is there any case that can carry both simultaneously? I know there's the old CS-34 case from WWII that was meant for the Signal Corps that could hold a Camillus TL-29 and a pair of Utica TL-13 lineman's pliers, and there's a few meant for both pliers and a wrench made in modern day.
-
I've seen custom cases that could house pliers and an SAK. I think a pair of lineman's pliers could be a good all around set to carry.
-
Just starting out!
- Picknicker (what a name!)
- Sentinel Clip (simply coz of the clip)
- Forester (my favorite so far)
It's quite tough given the limited 111mm choices we have here. My Sentinel clip was a 3/4 serrated edge which I eventually trimmed down to a plain edge so it'll be easier to maintain. I'd rather have a OHO Sentinel but only the regular blade was available. For the Picknicker...well, I wanted to try something without the wood saw.
So far my favorite is the Forester. Somehow its dimensions fit my pocket better than the thinner Picknicker. I'm still alternating since the Picknicker is still less than a day old as of this posting.
How I wish local stores had a Outrider - I'm really after the large locking blade + scissors combo. Unfortunately only the Hercules (and the Workchamp) has that combo.
I also went for the corkscrew configuration because I use it as a holder for the eyeglass screwdriver. I figured that every tool out there is bound to have something between #0,,#1,#2 screwdriver but not all have something small for eyeglasses.
-
I too like the Outrider as it is pretty simple tool setup that I can see taking outdoors for some basic needs. I also have a Fireman, Hercules and now Workchamp.
I do with that serrated blade on the Fireman and think it would be a great tool to have on hikes/camping trips and even though it is curved was available on other 111mm saks like the Outrider!
I also wish that the 111mm scales had the straight pin hole! :)

-
@sir_mike said:
I too like the Outrider as it is pretty simple tool setup that I can see taking outdoors for some basic needs. I also have a Fireman, Hercules and now Workchamp.I do with that serrated blade on the Fireman and think it would be a great tool to have on hikes/camping trips and even though it is curved was available on other 111mm saks like the Outrider!
I also wish that the 111mm scales had the straight pin hole! :)
You can add one with a similar diameter sewing pin and a lighter. I did it to my workchamp. You heat the pin and press it into the scales where the hole normally would go. Might take several repetitions to get the depth right but in the end, I have a pin slot on the tool.

-
I too like the Outrider as it is pretty simple tool setup that I can see taking outdoors for some basic needs. I also have a Fireman, Hercules and now Workchamp.
I do with that serrated blade on the Fireman and think it would be a great tool to have on hikes/camping trips and even though it is curved was available on other 111mm saks like the Outrider!
I also wish that the 111mm scales had the straight pin hole! :)
You can add one with a similar diameter sewing pin and a lighter. I did it to my workchamp. You heat the pin and press it into the scales where the hole normally would go. Might take several repetitions to get the depth right but in the end, I have a pin slot on the tool.

Thanks for the tip! I might have to give it a go!

-
TheDude's mention of the parachutist led me to some further googling which uncovered the jumpmaster...
:oI have been looking for a SAK / MT with this <i>exact</i> set of tools on it for ages. And now I find it, and it turns out that it's discontinued... :( >:(

-
@Scoon said:
TheDude's mention of the parachutist led me to some further googling which uncovered the jumpmaster...
:oI have been looking for a SAK / MT with this <i>exact</i> set of tools on it for ages. And now I find it, and it turns out that it's discontinued... :( >:(

It looks just like the Fireman except philips driver instead of the cork screw. You could get a Fireman and mod/change out the cork screw to a philips! :)
-
TheDude's mention of the parachutist led me to some further googling which uncovered the jumpmaster...
:oI have been looking for a SAK / MT with this <i>exact</i> set of tools on it for ages. And now I find it, and it turns out that it's discontinued... :( >:(

It looks just like the Fireman except philips driver instead of the cork screw. You could get a Fireman and mod/change out the cork screw to a philips! :)
Plus you can get the Fireman in OHO.

-
Is there a noticeable difference in weight between a liner lock 111mm versus a side lock 111mm? Is a Forester heavier than a Rucksack?
-
TheDude's mention of the parachutist led me to some further googling which uncovered the jumpmaster...
:oI have been looking for a SAK / MT with this <i>exact</i> set of tools on it for ages. And now I find it, and it turns out that it's discontinued... :( >:(

It looks just like the Fireman except philips driver instead of the cork screw. You could get a Fireman and mod/change out the cork screw to a philips! :)
Plus you can get the Fireman in OHO.

That's pretty awesome actually but I'd have to get someone to mod the corkscrew to a phillips
-
TheDude's mention of the parachutist led me to some further googling which uncovered the jumpmaster...
:oI have been looking for a SAK / MT with this <i>exact</i> set of tools on it for ages. And now I find it, and it turns out that it's discontinued... :( >:(

It looks just like the Fireman except philips driver instead of the cork screw. You could get a Fireman and mod/change out the cork screw to a philips! :)
Plus you can get the Fireman in OHO.

That's pretty awesome actually but I'd have to get someone to mod the corkscrew to a phillips
That shouldn't be that hard to find someone here to do that! You would just have to ask around and find the philips tool. :)
-
There was a jumpmaster on ebay a while back but it was a bit pricey. I must have been going through one of those crazy phases where I thought I should get a life. :ahhh
-
Amusing how small Swisstools implements suddenly look like after you've handled a handful of 111mm knives....
-

111 Centurian; bought it because I wanted to tryout a liner lock. I like it but don't EDC it. -
I got another 111mm to show, the Workchamp! :)

-
That's pretty awesome actually but I'd have to get someone to mod the corkscrew to a phillips
Just for statistical reasons, how many corkscrews do you own? :D
On SAKs? 0, and I intend to keep it that way :D
My brother used to have a SAK with a corkscrew and I couldn't stand it. He lent it to me for a short while and I never once used the corkscrew, plus the pointy tip kept catching on loose threads in my pocket.
I don't drink now, and a vast number of wines have converted to twist-off caps. Also, my brother lent his to someone who pulled at a bad angle and bent the corckscrew out, so he had to send it for repairs. AND (lol) I know a 'crazy russian' style way of uncorking a bottle with a small knife.
So yeah, not really keen to have a corckscrew on a SAK lol.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
