What did you use your Leatherman for today?
-
Fine tune and install robotic end of arm tooling, here cutting and trimming hoses and zip ties so that there are no loose ends that can be caught when the robot moves fast in 6 axes.

-
Fine tune and install robotic end of arm tooling, here cutting and trimming hoses and zip ties so that there are no loose ends that can be caught when the robot moves fast in 6 axes.

What does the robot chop with the axes?
Haha. Thats a misfortunate typo. I guess it moves in six axis, no axes. It was not a cyberdyne T-1000 killer robot but rather a humble ABB IRB 4600.
-
Fine tune and install robotic end of arm tooling, here cutting and trimming hoses and zip ties so that there are no loose ends that can be caught when the robot moves fast in 6 axes.

What does the robot chop with the axes?
Haha. Thats a misfortunate typo. I guess it moves in six axis, no axes. It was not a cyberdyne T-1000 killer robot but rather a humble ABB IRB 4600.
I can only think of 3 axis, care to explain?
-
Fine tune and install robotic end of arm tooling, here cutting and trimming hoses and zip ties so that there are no loose ends that can be caught when the robot moves fast in 6 axes.

What does the robot chop with the axes?
Haha. Thats a misfortunate typo. I guess it moves in six axis, no axes. It was not a cyberdyne T-1000 killer robot but rather a humble ABB IRB 4600.
I can only think of 3 axis, care to explain?
Sure,
There are of course only 3-planes to move in, and there are robots with only x-y-z (3 axis) movements, so called cartesian robots.
Six axis robots however have six axis that it can use to move it´s arm with extreme freedom within the 3-planes.
https://en.wikipedia.org/wiki/Six_degrees_of_freedom#/media/File:6DOF_en.jpg
Therefore, it is a challenge to distribute media like compressed air and current to the end of arm tool without compromising the movements or risk that a hose or cable is cut. There can be high risk if for example a vacuum hose brakes in a high acceleration movement and send a metal sheet like a frisbee.
That´s why all cable ties etc. have to be snug and the last preparation is what was in the picture before test run of the robot installation.
Here are the six axis explained:
https://www.youtube.com/watch?v=7coUcEHxnYAAnd here is something fun you can do with it:
https://www.youtube.com/watch?v=9PMCiMij0kQ
(I would never do that)Sorry for the off topic.
-
Rebar was fixing a stapler. Again

-
I own a 2009 Chevy Suburban, and have had repeated problems with the rear window defroster wires disconnecting from the glass. I've soldered them back on, taped them on and glued them on. So I was working on them again today, and found myself in need of a file to smooth out the connector. The Rebar on my belt handled the job with ease. I don't always carry an MT, and have gone for months without one, but resumed carrying the Rebar a couple of days ago.
-
I think grant needs one of them 6 axis robots for his birthday...
-
Installed a flashing LED light on my friends sons bike.

-
Its remarkable how much I use my Style PS at the school
pulling stales out of boards
yesterday I tightened two screws on a laptop cart, then used the pliers to straighten out the locking mechanism on the same said cart
pliers to pull a small splinter of metal from a girls birkenstock
scissors to cut loose threads off of clothing and tiesalmost every dang day I use this tool.
I love it. -
Used my Wave to open and set up a stack of new iPhones today

Dream. Wish. Leave nothing undone. Repeat.
-
And to open a really strange snack for me - a pack of carrots [emoji15]

Dream. Wish. Leave nothing undone. Repeat.
-
From iPhones to carrots.
Now that's a transition!
-
@NKlamerus said:
From iPhones to carrots.Now that's a transition!
Today indeed is a fruits & veggies day [emoji1]
Dream. Wish. Leave nothing undone. Repeat.
-
Instead of wasting time looking for one, out came the metal file on my Rev for the clamp I'm making in machine shop.
Sent from my Z987 using Tapatalk

-
We had a corporate pizza party at work today and the pizza boxes have a coupon on the lid and I used my Juice S2 to cut 50 coupons off the cardboard. I'll probably need to strop it tonight.
-
Used my Wave a lot to open and set three new flipcharts at work, so mainly blade and pliers to unscrew some tight binds recently.
Today I've replaced a handle on one of my grandpa's hammers that are now mine with a new one. It was too long for storing in my small instruments case, so I shortened it with a saw and filed it to smoothen the cut

I wanted to buy a new hammer btw, but the ones I've found at the biggest local hardware store were either too expensive or of questionable quality, or both, so I decided to give this trustworthy one a new life [emoji2]
Dream. Wish. Leave nothing undone. Repeat.
-
Used Surge pliers to remove that annoying button on top of one of my baseball caps.
At the same time used OHT pliers to hold the base of the pin on the opposing side. -
I used my new Signal to open some packages today. Yesterday I used its hammer to pound in a thumbtack....perhaps unnecessary, but nice and fun ;)
Sent from my SM-G920R4 using Tapatalk
-
Are you liking the Signal, Mon?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login