The Hacked Leatherman Owners Club.
-
Very cool!!!

-
@Obi1shinobee said:
AwlPST
Awlright

-
Nice Obi
That's us mobile.
Nate -
-
Very nice!
That's us mobile.
Nate -
Cool

-
-
@SteveC said:
I posted this over in the mod squad but I'll post it here as well.I've been thinking about doing these mods for a while. Always thought that the Rebar's awl needed to be pointier and sharper. I also never liked the tapered med screwdriver as it hampers the ability of the screwdriver to access recessed screws. Spent a little time on the bench grinder today and remedied both issues.
Before:

It was hard to get action shots of the grinding

Cooling often

Finishing off with some file work





All done, awl is super sharp and much better suited for poking things :D and the screwdriver will be able to get at recessed screws.

edit :
I decided to refine the awl a bit more


The top edge is sharp as well with a slight angle to it

Nice work !
Sak's rule !
-
@hiraethus said:
Blunt-nose parts bin Rebar

Pliers from a Blast, scissors from a Wave, small flat driver from a Kick.
Also contains Rebar blades, phillips driver, large flat driver, awl, saw and file.I like it.

-
-
BLAST-OFF FOREVER !!


-
Obi, you really enjoy making these franken-tools
-
@Donsib said:
Hey thanks for the quick reply!Hmm my diamond file wore smooth on its second use which is why I'm not thrilled with it. I use diamond files regularly so know how to use them so wasn't doing anything stupid.
And hey franimal, yup I know I can't get spares from leatherman! Also understand voiding warrantee's and such. I was mostly wondering which models to scavenge from, or if anyone maintains a "bits" box.
Yup, thought the rebar looked like a good doner just wasn't sure about the size compatability so thanks for that!
And thanks for the welcome! I have been lurking a bit but had to post as this topic is just what I needed because my charge (which I really like) is driving me nuts... those pliers! What were they thinking?
Yep, rebar is the cheapest source for the updated pliers and awl in the midsized tool line. If you would like an alternative to the wingman scissors (which is admittedly a much easier swap) Victorinox 91mm scissors are fairly easy to aquire, and can fit a Charge with a bit of drilling/grinding (lockup requires a little more grinding of the tang, but is not necessary, as using these scissors pushes them into the blade stop anyhow). If you already have a dremel (or want an excuse to get one) go for the Vic scissors route.
As for the pliers, I assume you want to know why they put the cap crimper on... in which case I have to agree, I dont know what they were thinking, compromising the pliers with such a marginally functional tool.
-
Hey everyone I'm pretty new to this forum, but I thought I would share my mod/hacks that I did on my wave. There are only 4 original tools left, the large flathead screwdriver, the can opener/ bottle opener, the saw, and the file. The rest are from a wingman, a kick, a rebar, bought separately or fabricated. The obvious ones are s30v blade, the rebar pliers, and the wingman scissors. From the kick I used the medium flat head, and the 3D Philips. Where the old scissors were, I modified a 32 gig flash drive to fit. I modified a hacksaw blade to fit into the slot for the pocket clip and lanyard, it slides in and out and lock in both positions using the inside tools locking mechanism. I also added a notch in the other slot made for the pocket clip to hold a pair of tweezers from a SAK. The last thing is that I added the pocket clip from the wingman because it left the slot open and because I already had it.
ThanksSent from my iPhone using Tapatalk
What was your source for the hacksaw? Was it a regular hacksaw you hollowed out, or a saw blade that came that way?
Also, wouldn't the weight of the tool damage any USB device you plug that into?
-
That's some magnet!!!!
-
Impressive! :o
-
[emoji43] whoa
Sent from my VS985 4G using Tapatalk
-
I'm in the club :D
I dumped the mini driver & added a rebar awl & pliers head to my ALX. I was never going to use the mini driver, now it has a much better tool load out, for me anyway.
The awl was rubbing the tool handle and pliers stop. So I thinned it down a couple thousandth on each side.
and moved the spacer to the outside of the awl.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login










