Tin snips anyone?
-
toolzall made a maintinance pro that is similiar to the bear hunting shears. It works well on light metal I cut metal straps all the time. It nicks the blade but works everytime. the other is the old tradesman shears. it is a folding multitool with serated shears. I use this to cut plastic straps and zip ties. I think it would cut metal straps better than the toolz all but do not know this.
The Imperial Schrade snips...
I have seen these for sale at @10$ with "Made in Ireland" stamped on the box. Was there a Schrade factory over there or was it just mislabeled? I think there is another variety with plier heads that was labeled the same.
-
I'm not sure of the history, but the Schrade company produced knives and tools in Ireland under the Imperial Schrade logo. The tinsnips above are surprisingly good quality even though they have the plastic-over-metal handles. Same can be said about the plier version pictured below.
They both seem to have been produced with a variety of logo inserts in the handles. The yellow Tradesman one is the most common. White inserts with APEX or Ducks Unlimited or Ridgid are others that come to mind. All the same tool mind you, just different logo-inserts.
The only other multitool that I know of from Imperial Schrade was this Sports Afield model. They were common in walmart stores about 7 or 8 years ago. At first glance they look like typical junk Chinese copies of a Leatherman, but they were made in Ireland and are of "medium-good" quality.
(Uh, sorry about the long ramble......) :P

-
I like a good ramble! Thanks for the info.
-
I guess I just need to find a pair of those snips :ahhh but Don't know where to find them.
-
I think I may have tracked down a Maintenance Pro Toolzall by Cresent If I win it I will let everyone know how they are :D I hope that they are pretty good
What made me think of these again I was purusing 1 of my fav hardware stores and they had some of the toolzall MTs but they weren't that cheap non the less I was gonna go back this weekend and pick the snips up ::)
But it got me to looking on Ebay and low and behold I found some on there and for a much lower price :D
-
That tool is made by Bear and it is rock solid Poncho. They do not include many blades/tools but being a Bear you can always add more if you want. :)
-
I didn't know you could add tools to them thanks for the heads up Bob
;) :DI believe it will do what I want it to thanks :D
-
Good luck, hope you get it cheap!

-
I am eagerly waiting for SOG PowerCut. It has side cutter, not the tin snips, but I use the side cutter all the time (possibly, more often then pliers), and having it in the multitool is my dream

-
Well I got the Maintenance Pro in the mail today
and I believe that I really like it :DThere aren't many tools in it :( but what is in there seems quality :)
-the tools are a med straight screwdriver, a file, a partially serrated blade and a saw

-this tool is also pretty big it's 4 and a half inches long closed but right @ 8 inches when folded out :o
-for a perspective the Swisstool is only around 6 and three quarters of an inch which is shorter than the maintenance pro by a whole inch and a quarter :o
I'll post pics of this tool later, it is a rather neat addition to my tools and I think I am gonna try and EDC this tool :)
-
Yay! Good to hear you finally got it Poncho! Looking forward to those pictures :)
-
It's crazy how big it folds out it really surprised me when it dwarfed the Swisstool :o
I think I read that Vic bought out Bear Cutlery back in the 90's when getting patents for the Swisstool
funny the 2 side by side do kinda favor (outside opening tools and very similar handles) but no locks on the MPI believe that they could have put at least 2 more tools in there and still clear the snip head though :(
perhaps I can get some spare parts from SOG and see if they fit
:D -
@Poncho65 said:
It's crazy how big it folds out it really surprised me when it dwarfed the Swisstool :oI think I read that Vic bought out Bear Cutlery back in the 90's when getting patents for the Swisstool
funny the 2 side by side do kinda favor (outside opening tools and very similar handles) but no locks on the MPI believe that they could have put at least 2 more tools in there and still clear the snip head though :(
perhaps I can get some spare parts from SOG and see if they fit
:DI've often thought about it, but never tried. That is quite a big spacer don't you think? Certainly there should be room for a nice file blade or a sheepsfoot knife. :)
-
It's crazy how big it folds out it really surprised me when it dwarfed the Swisstool :o
I think I read that Vic bought out Bear Cutlery back in the 90's when getting patents for the Swisstool
funny the 2 side by side do kinda favor (outside opening tools and very similar handles) but no locks on the MPI believe that they could have put at least 2 more tools in there and still clear the snip head though :(
perhaps I can get some spare parts from SOG and see if they fit
:DI've often thought about it, but never tried. That is quite a big spacer don't you think? Certainly there should be room for a nice file blade or a sheepsfoot knife. :)
Yeah that spacer is way to big
I might consider a good phillips head driver ::) maybe an awl, anything is fair game right now :D I think I might check out SOGs website here in a few minutes 
-
Well I tool the MP to work with the intention of using it :) but we got rained out before we got started :( Guess it will have to wait til Monday :P but for now I have the rest of the day off
:D -
Also I found out that the MP will fit in the Supertool Sheath quite nicely
I bought this sheath a while back thinking that it was the smaller PST version sheath but when it got here it was for the ST :( But I am turning lemons into lemonade and gonna use this sheath for the MP
Can't let such a quality sheath just sit there ::) :D -
I have had a chance to play a little with my MP today :D I like having the shears on me
But I am in a dilemma
now I don't want to carry more than 1 MT @ a time :( I really like the shears but I think I would definitely miss my pliers :ahhh What should I do ???Also on a different note I may have just performed my 1st mod :o the file on the MP was alright but definitely not a Nicholson :( which was a little disappointing so I decided to put a different file in it but what
I looked @ it and noticed that it looked very similar to my PST and PST II
So my newly gotten PST II has a diamond file in it >:D Guess what it was a perfect fit
Now I have a diamond file in it and am thinking of putting more things in it :DSo far very happy with this tool

-
So the Leatherman file fit correctly in the Bear-made tool eh? That's nice! :)
Er, but what about your poor fileless PST II? :(
-
@J-sews said:
So the Leatherman file fit correctly in the Bear-made tool eh? That's nice! :)Er, but what about your poor fileless PST II? :(
Don't worry Bob I put the file from the MP in the PST II so as not to make it useless
Plus I didn't want the other file just laying around this way the PST II is still very useful :D Someday I will probably put it back the way it is suppose to beHey think Kwakster might have any spare parts for PSTs or PST IIs ?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login