Off-Brand Challenge - ETHEREALICER - Böker City Tool / SWIZA D04
-
Thanks guys, you are the best

I have it from a reliable source that soon a Swiza model with saw should be available.

Anyway, tonight the Swiza will have to face the dreaded can, afterwards it will be time to sharpen. -
Yes, if the Classic can do it, every other knife needs to do it too...
O'm pleasant surprised with the knife today. If the grip were more comfortable I could actually like it :D
The awl punched holes into that can like nothing else, twisting to make the holes big showed that the awl has a good bite. At this task it performed well.
The blade is at an odd angle, but that did not keep it to cut through that can. Sliced very well, no serious damage to the edge. Overall, another success

-

Have you tried opening the tools with gloves on?Sent from a device made from star dust using tapatalk
-
@Grathr said:

Have you tried opening the tools with gloves on?Sent from a device made from star dust using tapatalk
Nope but I can try that... let me check...
Windstoppers: yes I can open all the tools, but only by engaging my thumbnail though the fabric. I also can open the main blade on my CT, but it's a bit harder...Will test other gloves...

-

Have you tried opening the tools with gloves on?Sent from a device made from star dust using tapatalk
Nope but I can try that... let me check...
Windstoppers: yes I can open all the tools, but only by engaging my thumbnail though the fabric. I also can open the main blade on my CT, but it's a bit harder...Will test other gloves...
Not sure the CT is a fair comparison, as it's too thick. Maybe try a Spartan/Tinker?

-

Have you tried opening the tools with gloves on?Sent from a device made from star dust using tapatalk
Nope but I can try that... let me check...
Windstoppers: yes I can open all the tools, but only by engaging my thumbnail though the fabric. I also can open the main blade on my CT, but it's a bit harder...Will test other gloves...
Not sure the CT is a fair comparison, as it's too thick. Maybe try a Spartan/Tinker?

I will, but I doubt that is a problem with the windstoppers, the only question is, can you get your nail into the nick. For example, I can open the small blade with about 5 tries, I can't open the metal file as it is further in. I actually think on a thinner model it will be easier to open the main blade, as it is easier accessible (remember, on Vics the nail-nick for the main blade is on the inside).
-
Finally got around to sharpen the Doofer...
Ok, my amateur opinion is that it took more work than it should have.

-

Have you tried opening the tools with gloves on?Sent from a device made from star dust using tapatalk
Nope but I can try that... let me check...
Windstoppers: yes I can open all the tools, but only by engaging my thumbnail though the fabric. I also can open the main blade on my CT, but it's a bit harder...Will test other gloves...
Not sure the CT is a fair comparison, as it's too thick. Maybe try a Spartan/Tinker?

I will, but I doubt that is a problem with the windstoppers, the only question is, can you get your nail into the nick. For example, I can open the small blade with about 5 tries, I can't open the metal file as it is further in. I actually think on a thinner model it will be easier to open the main blade, as it is easier accessible (remember, on Vics the nail-nick for the main blade is on the inside).
Sidenote: thinner SAKs make it easier.
Ok, with thick welding gloves I could not open the Swiza as the awl prevented it (with the open awl I could manage). These are thick gloves but in fairly good condition, often workgloves are stiffer and less grippy at the finger tip, which will make it even harder.
Conglusion:
Opening the tools on the Swiza is much easier than your traditional SAK, but its not built to be opened with thick working gloves.
There are 3 reasons for that for the easier opening:- large hole for better grip
- tools are sticking way more out of the grip (an advantage for opening, disadvantage for grip comfort.)
- Weaker back-spring (its a liner-lock after all)

-
Etherealicer, thanks for the posts. Nice to the Sviza in action for the first time. These guys have potential, but it doesn't look like they are there quite yet.
-
@Etherealicer said:
Finally got around to sharpen the Doofer...Ok, my amateur opinion is that it took more work than it should have.
That's because you're not sharpening freehand yet
those gizmos only work well if the factory angle is less than the angle on the stones, otherwise you're not just sharpening, you're reprofiling ;) -
@50ft-trad said:
Finally got around to sharpen the Doofer...
Ok, my **amateur **opinion is that it took more work than it should have.
That's because you're not sharpening freehand yet
those gizmos only work well if the factory angle is less than the angle on the stones, otherwise you're not just sharpening, you're reprofiling ;)That is what I figured.
-
[quote author=Grathr link=topic=62284.msg1172390#msg1172390 date=1445922239]

Have you tried opening the tools with gloves on?Sent from a device made from star dust using tapatalk
Nope but I can try that... let me check...
Windstoppers: yes I can open all the tools, but only by engaging my thumbnail though the fabric. I also can open the main blade on my CT, but it's a bit harder...Will test other gloves...
Not sure the CT is a fair comparison, as it's too thick. Maybe try a Spartan/Tinker?

I will, but I doubt that is a problem with the windstoppers, the only question is, can you get your nail into the nick. For example, I can open the small blade with about 5 tries, I can't open the metal file as it is further in. I actually think on a thinner model it will be easier to open the main blade, as it is easier accessible (remember, on Vics the nail-nick for the main blade is on the inside).
Sidenote: thinner SAKs make it easier.
Ok, with thick welding gloves I could not open the Swiza as the awl prevented it (with the open awl I could manage). These are thick gloves but in fairly good condition, often workgloves are stiffer and less grippy at the finger tip, which will make it even harder.
Conglusion:
Opening the tools on the Swiza is much easier than your traditional SAK, but its not built to be opened with thick working gloves.
There are 3 reasons for that for the easier opening:- large hole for better grip
- tools are sticking way more out of the grip (an advantage for opening, disadvantage for grip comfort.)
- Weaker back-spring (its a liner-lock after all)
[/quote]
Thanks!
Might be a good choise for skiiers then?
I know I struggle a lot with a SAK and gloves in winter. -
LEGAL Advice
This knife is OHO AND LOCKING
While it not my have been designed for that, the blade is easy opened with a push of your thumb (just don't use the bloody* hole, just push the flat of the blade). -
Still trying to get a good feel for the knife... probably going to carry it for another week or so.
Today I tried to use the back layer Phillips but sadly I failed. It was simply to unstable (stronger spring would help) to apply pressure in an awkward position. I cannot compare this to a Vic, as I don't own a Vic with back-layer Phillips. Also, after failing to unscrew one screw, the PH showed wear. Not as bad as the Böker small-screwdriver, but definitively not good. I have used other tools much harder with much less wear showing.

-
Wow, even I expected better performance than this.....

-
So going for one with the corkscrew is a good idea :D
-
Looking at the tip of the philips driver, it kind of looks like it's too fine to work as a #2. The head comes to too much of a point, if you know what I mean, like the tip would bottom out on the depth of the screw slot without gripping the screw very well. Maybe even finer than a #1. I dunno.
Will it work on REALLY small screws, like the kinds on the backs of calculators and cameras and such?
-
pessimists ::) ::) ::) ::) ::)
:D
-
Experienced optimists...

:D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login