SOG Switch Plier 2.0
-
I think it could be fixed to get a decent performance out of it
-
@3rdpig said:
I'm happy that you got a good one, mine was awful. If they had have had another one on the shelf I'd have taken it back immediately. Not only was it gritty, it had a "detent" feel in the middle of the plier movement range where it would often stop when deploying or when squeezing and then releasing the pliers slowly.Using a pair of channel locks and a shop towel, I tweaked the pliers handle back into alignment. Then I adjusted the tension on the tools.
Then I soaked the plier head in a thin, abrasive solution I used for brass cleaning and then spent an hour or two working the pliers, both with the handle and by working the jaws themselves. After that I washed it in degreaser, rinsed it and blew it dry with compressed air and relubed it. Now it feels halfway decent. It's still nothing to brag about, but it springs open freely and doesn't catch in the middle anymore. It still has some tight spots, but at least it's not gritty anymore. I can use it without grinding my teeth every time I squeeze the pliers.
I must have got one on the bad end of the quality spectrum, but that seems to be my luck with Sog, my last 3 tools from them have been terrible. I expect my review of my Power Duo is still on the site somewhere. I disassembled that and spent a few hours getting the worst of problems fixed.
It seems mine is near like you, quite rugged.
I will play with it as for a brand new leatherman to make it smooth. -
My new switchplier setup. Added the 2 washers in between flat driver and phillips. I really get tired of can openers. I wanted to put the awl instead of the bottle opener, but settled on this setup.

It is great being able to swap tools on here. The scissors make it very complicated, but well worth it. -
I added a pair of scissors to a Powerlock I have and they were terrible, they'd cut paper, but not much else. They were so bad I replaced them with the V cutter. Did I just get a bad pair? How is everyone else's SOG scissors working?
-
@3rdpig said:
I added a pair of scissors to a Powerlock I have and they were terrible, they'd cut paper, but not much else. They were so bad I replaced them with the V cutter. Did I just get a bad pair? How is everyone else's SOG scissors working?They are not the best for sure. Mine are slightly better than wingman scissors, I'd rather have a decent pair of scissors than a file. Only because I rarely use a file on my mt. so you're not alone.
-
@3rdpig said:
The wire cutters are a pleasant surprise, mine worked well on everything I tried them on including stranded, automotive wiring.Curiously I found the wire cutters very disappointing when I tried them on 2.5 sq.mm (13 AWG) insulated copper wire. They seem to have poor geometry, with very little overlap of the cutting jaws and not enough clearance around them. The result is that you end up having to crush the wire before you've cut all the way through it. Stranded wire seems less of a problem because it deforms more easily. But with the solid wire, even a little Leatherman Squirt seems to do a better job.
-
Is there a way to remove the pocket clip? I don't use it and as a left hander it isn't convenient.
-
Yea but you need a torx driver and it is the same screw as the pivot
-
The wire cutters are a pleasant surprise, mine worked well on everything I tried them on including stranded, automotive wiring.
Curiously I found the wire cutters very disappointing when I tried them on 2.5 sq.mm (13 AWG) insulated copper wire. ...
This Youtube video contains an experiment showing the difficulty of cutting various wires using the SOG Switch Plier 2.0. The video is in German. I don't understand German, but the video was clear enough to understand without understanding the language.
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
I've tried cutting stranded wire (one of those mechanic's keyring things) and it did have issues. But not nearly as the LM
-
glad you managed to get a good fit for yoruself
-
I keep hearing the SOG scissors are bad, and it's disappointing. I've been planning to pick up a SOG MT sometime after Christmas, and it sounded like a cool idea to make up a bladeless build that contains scissors so I can still get some cutting done.
But if the scissors are that bad, I'm not sure I want to bother. A shame, since the easy modability is a brilliant feature in theory, and one I wish more manufacturers would try. -
@WoodsDuck said:
I keep hearing the SOG scissors are bad, and it's disappointing. I've been planning to pick up a SOG MT sometime after Christmas, and it sounded like a cool idea to make up a bladeless build that contains scissors so I can still get some cutting done.
But if the scissors are that bad, I'm not sure I want to bother. A shame, since the easy modability is a brilliant feature in theory, and one I wish more manufacturers would try.The scissors aren't the best but they aren't horrible. I have them in my Switchplier and I wouldn't replace them. What would you plan on using them for? They are worth having.

-
I use scissors all the time on my MTs, for just about everything. That's why when I'm not doing a challenge, I always have a SAK in my pocket.

-
How is it the signal got an owners club before the Switchplier? Or did I miss it.

Maybe this thread can be it
-
@Demel said:
How is it the signal got an owners club before the Switchplier? Or did I miss it.
Maybe this thread can be it
I just don't think there's much love for SOG these days. They have everything they need to be a real competitor, but until they start coming out with more quality multi tools , they will continue this downward trend.
I think the switch plier may be my next purchase, but I'm not ready to purchase any more tools for the time being
-
How is it the signal got an owners club before the Switchplier? Or did I miss it.

Maybe this thread can be it
I just don't think there's much love for SOG these days. They have everything they need to be a real competitor, but until they start coming out with more quality multi tools , they will continue this downward trend.
I think the switch plier may be my next purchase, but I'm not ready to purchase any more tools for the time being
That may be so. The Switchplier is a good tool. They just need to continue to perfect their tools.
-
Some of us have good foresight :D
As to the Switchplier, I really need to find time to fix that escaping spring on mine. It's not getting carried because of it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
