Show us your fixed blades
-
So you're gettin ready to go down the ESEE rabbit hole G? Do we need to send in the HSLD (high speed low drag) boys to rescue you? :D I hear there good knives but for some reason they don't appeal to me. :)
-
I feel (with relief) I'm starting to reach saturation point, and it looks like good parts of my disposable income will be heading in other directions soon.....
I wanted to get the ESEE 3,4,5 and 6, but my secret storage is full, and at time I realize the ridiculousness of it all....Since I have a BK9 the ESEE 5 is probably out of the running, so a 6 in in Orange & Green :ahhh sounds about right.
Fortunately I suspect sourcing an ESEE from here will be difficult.
Another problem is I can walk into local shops and choose from a huge selection of Cudemans for much less........
-
It's here :D

-
What a handful!!!!!

-
I've had eye's on that Hudson Bay off and on for a while so will will look forward to how you think it performs over time. :)
-
@David said:
I've had eye's on that Hudson Bay off and on for a while so will will look forward to how you think it performs over time. :)My advice would be to do it without a second thought. Worth it for the sheath (my original intention was buy it for the sheath for the bk9. But it won't fit with the ramp. So I decided to check out the condor. It's got a great finish, the aged hammered look, and it came sharp enough that a couple swipes on the sharpmaker had it where I wanted it. One handle scale feels thinner than the other, but are otherwise nicely finished and fit well.
Some had complaints about the 'ffg' not being ground. I was scared about getting a bar of steel with an edge, like a morbidly obese Mora. But mine both thins out slightly after the handle, and the grind is done well. Can't wait to get it into some wood, but it feels like a winner! And my first 1075 blade.
Funny how I got the scgrade schf36 on a whim, now I want the 37 and 38. Now I got this for the sheath, and I love it and want more condor! Ha!
-
@Gerhard Gerber said:
I feel (with relief) I'm starting to reach saturation point. . . .
Famous last words, so to speak.
We've all been there and have managed to overcome that obstacle :D
I think I'm getting closer, but then I discover I do have a taste for a pattern or steel that used to turn me off

-
@Gerhard Gerber said:
I feel (with relief) I'm starting to reach saturation point. . . .
Famous last words, so to speak.
We've all been there and have managed to overcome that obstacle :D
It's here :D
There you go again, made me look!

Found a South African site selling them for dirt cheap, and I'm busy restoring a GI Tanto, so the love affair with 1075 price vs performance is strong again....
Another big problem.....that same site sells Kizlyar, also reasonably priced..... :'( -
@David said:
I've had eye's on that Hudson Bay off and on for a while so will will look forward to how you think it performs over time. :)Oh my goodness.
It's so good.
BK9 good, damn near. It really is. So ergonomic if you choke down to a three finger grip on the bottom, it's rock solid, every strike transmits zero vibration and the grip is solid. It chopped better than my tomahawk once I got toward the center of the trees I was chopping, (white cedar and hophorn beam), and overall aaalmost as good as the bk9, which is astounding. But the condor already has the wood scales and leather sheath I want for the Becker! I'm using the bk4 sheath for the 9, without it I doubt I'd be in love as much as I am.
Which isn't to say the condor is perfect. The edge is a bit fragile, and I straightened a roll a couple times with the short steel I have. Which was easy and it fixed well and stayed sharp, but know that it wont be hair popping sharp after chopping like the bk9.
As far as cutting food, didn't do much as I usually prefer stainless for food. That being said, I sliced an apple to bits and it was lovely :D
So yeah, condor the not so surprising winner here.
Trail master wasn't mentioned for a comparison (even though it went along on the trip as well), because though it chops decently, I'd never pick it over either of the other two if I planned on trying to chop with it.

(sorry if it's a bit rambling :D )
-
Newest 165's including a S-W (top) and two awesome Craftsman hidden tangs (one a Deerslayer)!!!!!

My collection.

Top to bottom...
Schrade 165OT
Schrade Walden 165UH
Schrade Walden 165OT
(Schrade) Craftsman 165 Deerslayer ACA Edge (hidden tang)
(Schrade) Craftsman 165 (hidden tang)
(Schrade) Craftsman 165Poor pics, sorry.
-
those aren't bad pics. the knives just seem more rustic and that is good
-
Wow SG, that is an impressive collection of 165's. The best I've ever seen. 8) 8) 8)
:) -
@David said:
Wow SG, that is an impressive collection of 165's. The best I've ever seen. 8) 8) 8)
:)Thank you David!!! Had only intended on getting one but it got outta hand. The pattern is tied to happy memories for me. There are more variations but they start getting really really scarce/expensive from here on out. I might pick another one up if I catch one reasonable but I'm about done with this pattern. The two hidden tang Craftsman need sheaths so I have to get those ordered. These are such great hunting knives...once you hold one, you want another one to put back. The weight, heft and ergonomics are just perfect. The old Schrade 1095 is awesome too!
Here's a great thread on them....lots of pics!
www.bladeforums.com/forums/showthread.php/725324-Post-your-165-s! -
Schrade 165OT
Schrade Walden 165UH
Schrade Walden 165OT
(Schrade) Craftsman 165 Deerslayer ACA Edge (hidden tang)
(Schrade) Craftsman 165 (hidden tang)
(Schrade) Craftsman 165Very very VERY nice!

-
@SAK Guy said:
Newest 165's including a S-W (top) and two awesome Craftsman hidden tangs (one a Deerslayer)!!!!!

My collection.

Top to bottom...
Schrade 165OT
Schrade Walden 165UH
Schrade Walden 165OT
(Schrade) Craftsman 165 Deerslayer ACA Edge (hidden tang)
(Schrade) Craftsman 165 (hidden tang)
(Schrade) Craftsman 165Poor pics, sorry.
Wow, those are really cool.

-
Newest 165's including a S-W (top) and two awesome Craftsman hidden tangs (one a Deerslayer)!!!!!

My collection.

Top to bottom...
Schrade 165OT
Schrade Walden 165UH
Schrade Walden 165OT
(Schrade) Craftsman 165 Deerslayer ACA Edge (hidden tang)
(Schrade) Craftsman 165 (hidden tang)
(Schrade) Craftsman 165Poor pics, sorry.
Wow, those are really cool.

Thanks Z-man!!!!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login