Off-Brand Challenge - ETHEREALICER - Böker City Tool / SWIZA D04
-
Still trying to get a good feel for the knife... probably going to carry it for another week or so.
Today I tried to use the back layer Phillips but sadly I failed. It was simply to unstable (stronger spring would help) to apply pressure in an awkward position. I cannot compare this to a Vic, as I don't own a Vic with back-layer Phillips. Also, after failing to unscrew one screw, the PH showed wear. Not as bad as the Böker small-screwdriver, but definitively not good. I have used other tools much harder with much less wear showing.

-
Wow, even I expected better performance than this.....

-
So going for one with the corkscrew is a good idea :D
-
Looking at the tip of the philips driver, it kind of looks like it's too fine to work as a #2. The head comes to too much of a point, if you know what I mean, like the tip would bottom out on the depth of the screw slot without gripping the screw very well. Maybe even finer than a #1. I dunno.
Will it work on REALLY small screws, like the kinds on the backs of calculators and cameras and such?
-
pessimists ::) ::) ::) ::) ::)
:D
-
Experienced optimists...

:D
-
@Lynn LeFey said:
Looking at the tip of the philips driver, it kind of looks like it's too fine to work as a #2. The head comes to too much of a point, if you know what I mean, like the tip would bottom out on the depth of the screw slot without gripping the screw very well. Maybe even finer than a #1. I dunno.Will it work on REALLY small screws, like the kinds on the backs of calculators and cameras and such?
It is advertised as #1 and yes its very pointy, I noticed that before but have not posted it because I wanted to give the tool a chance before I start the ranting :P
To the left you see your garden variety #1

-
I don't know about you, but I don't come across many #1 philips screws. I'd think for a general purpose tool, a #2 would be much more generally useful. And it seems strangely out of scale with the rest of the tool.

I guess maybe your rant is something along these lines?
-
@Lynn LeFey said:
I don't know about you, but I don't come across many #1 philips screws. I'd think for a general purpose tool, a #2 would be much more generally useful. And it seems strangely out of scale with the rest of the tool.
I guess maybe your rant is something along these lines?
Well, computers almost exclusively use #1, BUT a large part won't be accessible with a back layer Phillips (needs too much room).
-
Ooops... once more in the right place
Ok, the following is not for the weak... it also earned me a
from my fiancee ::)During the Rugby-game, I constantly pressed the button with my fingernail to test how durable it is. I mostly pressed my nail into the gap on top of the button, where it is soft, figuring that this would be the weakest spot. Turns out I was wrong, but see for yourself. And I really like those scales :ahhh
Also, now my thumb hurts :P

-

Is this covered by the guarantee?
I wonder if it is worth buying one.
I feel like we are beta testing their product, something that I felt for the powerduo a few years ago. -
@dks said:

Is this covered by the guarantee?
I wonder if it is worth buying one.
I feel like we are beta testing their product, something that I felt for the powerduo a few years ago.I wish we were for the PowerDuo... that would have implied that they listened to customer feedback and then improved their product accoridngly :'(
Still digging the PowerDuo, very nice form. -
I still use the powerduo. I like the pliers and the blade. The rest.......

-
Some pumpkin carving today...




-
Another disappointment. Seriously, I'm not that hard on the tool. In fact I think I was quite gentle... Problem is again the weak back-spring (I have to check out another one just to see if it is just mine or a general problem). The tool is so wobbely / instable that is extremely hard not to slip off.

-
That is a pretty serious issue!
-
Could it be that they use the same, too hard, steel for all the implements that's causing the tools to chip?
For instance Vic uses 56 RC for their blades and 53 RC for the screwdrivers and can openers. If they use the 57 RC for the drivers, that could possibly explain the chipping of the phillips and can opener.

-
@enki_ck said:
Could it be that they use the same, too hard, steel for all the implements that's causing the tools to chip?For instance Vic uses 56 RC for their blades and 53 RC for the screwdrivers and can openers. If they use the 57 RC for the drivers, that could possibly explain the chipping of the phillips and can opener.

couple of hours too late... I just watched a demonstration on how to test hardness of steel at the Klötzli factory (open-door day) :P. However, it rather feels/looks like too soft than too hard to me (deformation not chipping).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
