What tool did you carry today?
-
This could be a surprise and a shock for many....
.... Juice CS4 :ahhh
I'm carrying it to remind me what I dislike about it, so I can gradually start to try and refine out the issues, and see if I can get it as good as it should have been in the first place ::)
So far, I've just sharpened the awl, and had a closer look at the scissors. Crinking, sharpening, and refining the pivot shouldn't be too much issue, though I'm a little concerned about the scissor tips. Looks like they might have lifted off the fixture a little when grinding, which seems to have left a little gap just at the tips. That might be a little trickier to iron out.
-
@50ft-trad said:
This could be a surprise and a shock for many........ Juice CS4 :ahhh
I'm carrying it to remind me what I dislike about it, so I can gradually start to try and refine out the issues, and see if I can get it as good as it should have been in the first place ::)
So far, I've just sharpened the awl, and had a closer look at the scissors. Crinking, sharpening, and refining the pivot shouldn't be too much issue, though I'm a little concerned about the scissor tips. Looks like they might have lifted off the fixture a little when grinding, which seems to have left a little gap just at the tips. That might be a little trickier to iron out.
Cool, let us know how it works out.
FYI I don't carry any of the juice series either, to small.Sak's rule !
-
@50ft-trad said:
This could be a surprise and a shock for many....
.... Juice CS4 :ahhh
I'm carrying it to remind me what I dislike about it, so I can gradually start to try and refine out the issues, and see if I can get it as good as it should have been in the first place ::)
So far, I've just sharpened the awl, and had a closer look at the scissors. Crinking, sharpening, and refining the pivot shouldn't be too much issue, though I'm a little concerned about the scissor tips. Looks like they might have lifted off the fixture a little when grinding, which seems to have left a little gap just at the tips. That might be a little trickier to iron out.
Cool, let us know how it works out.
FYI I don't carry any of the juice series either, to small.Sak's rule !
Cheers Colt

I happen to think the size is perfect for urban pocket carry, but there's been a lot of recurring issues (quality) thoughout all the models that have come my way. Scissors, can opener, saw, awl, flat drivers....
The concept is fantastic, but the execution is terrible. Hopefully I can finally get one I'm happy with, but I think I'm going to have to invest some time into it
-
@50ft-trad said:
This could be a surprise and a shock for many........ Juice CS4 :ahhh
I'm carrying it to remind me what I dislike about it, so I can gradually start to try and refine out the issues, and see if I can get it as good as it should have been in the first place ::)
So far, I've just sharpened the awl, and had a closer look at the scissors. Crinking, sharpening, and refining the pivot shouldn't be too much issue, though I'm a little concerned about the scissor tips. Looks like they might have lifted off the fixture a little when grinding, which seems to have left a little gap just at the tips. That might be a little trickier to iron out.
Mine have that too... about 5mm on either side of the scissors. Kinda looks like they tried to make a micro-serrated part there. Needless to say
:kirky:
-
@50ft-trad said:
This could be a surprise and a shock for many....
.... Juice CS4 :ahhh
I'm carrying it to remind me what I dislike about it, so I can gradually start to try and refine out the issues, and see if I can get it as good as it should have been in the first place ::)
So far, I've just sharpened the awl, and had a closer look at the scissors. Crinking, sharpening, and refining the pivot shouldn't be too much issue, though I'm a little concerned about the scissor tips. Looks like they might have lifted off the fixture a little when grinding, which seems to have left a little gap just at the tips. That might be a little trickier to iron out.
Mine have that too... about 5mm on either side of the scissors. Kinda looks like they tried to make a micro-serrated part there. Needless to say
:kirky:
Nah, sharpening will get that debacle corrected in no time. They all have that micro serration segment, but all vary as to how "toothy" it is. What I'm on about with mine is the actual faces that "rub together" dont appear straight right at the very ends. Not determined if it's one or both yet, and I've also noticed the movable jaw is longer (protruding) by about 0.5mm. I'll sort it though ;)
-

Sak's rule !
Signal for me too, but with yellow bits still attached ;) I really like this MT

Sent from my SM-G920R4 using Tapatalk
You know, I really like it also, it pairs up with so many different SAK's, seems like must of us are carrying multiples anyways.
Sak's rule !
-

Sak's rule !
Signal for me too, but with yellow bits still attached ;) I really like this MT

Sent from my SM-G920R4 using Tapatalk
You know, I really like it also, it pairs up with so many different SAK's, seems like must of us are carrying multiples anyways.
Sak's rule !
Exactly. It's a perfect companion to my MechaRogue

Sent from my SM-G920R4 using Tapatalk
-
-
PST II Farmer

-
I'll give you all one guess what tool I'm carrying. ::)
-

Sak's rule !
-
I'll give you all one guess what tool I'm carrying. ::)
LM Juice >:D
Those drivers are little thumb biters
That's the one. :D I've since put a drop of oil on the drivers which does help some.
-
Signal and MechaRogue again today :)
Sent from my SM-G920R4 using Tapatalk
-
I'll give you all one guess what tool I'm carrying. ::)
LM Juice >:D
Those drivers are little thumb biters
That's the one. :D I've since put a drop of oil on the drivers which does help some.

I find if I use the side of the nail (so the thumb is at 90 degrees to the handle) then it doesn't bite.
-
I'll give you all one guess what tool I'm carrying. ::)
LM Juice >:D
Those drivers are little thumb biters
That's the one. :D I've since put a drop of oil on the drivers which does help some.

I find if I use the side of the nail (so the thumb is at 90 degrees to the handle) then it doesn't bite.
That sounds like a good idea, though this one was so seized it was all but impossible to open. I'd not used it in a long time and I guess the old oil had gone sticky. I'll definitely give your way a go. :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


