OPINELS
-
Thats a looker

-
too shiny to use.. :D
-
I received an olive wood no8 today

-
Wow does that have a carbon blade Smashie?
-
-
@HarleyXJGuy said:
Wow does that have a carbon blade Smashie?No it's stainless ( I can live with that) but it would be a no brainier to swap
-
My recommendation is usually a Carbon No.8
My most used one is a Carbon No.9 though; but stainless with other handle options can also work.
The Carbon blade takes a finer edge and holds it longer but the stainless is fine if you have access to a sharpening system.Size with a 111mm SAK; No.8 is similar while No.9 is slightly bigger. I have a friend who swears by his No.7 so if you are into smaller knives then do that.
-
Thanks Sharky
Good advice and great size comparision piccie with the SAK - I can relate to that :)

-
-
@Gareth said:
Having receintly decided that the No7 Carbon is my favourite Opinel so far, I'm almost glad that the special wood versions are either No6 or No8 Inox only. It certainly saves me a few quid anyway. That does look good though mate.
I'm really not fussed about the patina side of it, the stainless blade sharpens easily and holds an edge very well.
When I say I'm not fussed about patina this is my past coming back to haunt me, if it's got tarnishing on then you haven't maintained it properly. You can blame Her Majesty's armed forces for that
-
@SAK Guy said:
In some ways, using a limited camera can make you better. A better camera can make everything easier but for me, if I can do it with a lesser camera, I own it.** Does that make sense?** In the past, using film cameras that were at their the technological apex in the 60's and having to make it work taught me a lot of things about seeing/imaging.Always did everything the hard way.....


It makes a lot of sense, to me at least. I've experimented with a few low bugdet cameras, like a point-and-shoot Pentax that had the clearest lens I've seen and a Zenit with up to x500 frame time (exposure?) with a chamber that always made me think of a smoky old room with its heavy curtains slighty closed in a sunny morning, seen from the mirror, for some reason. Lots of black and white pics with that one. There were some others like an ancient Kodak point-and-shoot, the others I don't recall well.
Photography was an expensive hobby back then, getting good films, having them developed, having to make the right choices quickly. Nowadays it's different, I don't like digital cameras, first of all because they need some time to take a pic (or cost a small fortune if they don't -take -much- time) and so one may want to take several in a row to get a good one. The initial subjet is often gone though, that expression on a face, that particular moment of a pictorial ensemble, what one wanted to capture (memorialise, I prefer that word) .
Sorry for rambling.
-
I have a carbon Opinel and I love it. It does leave a metallic taste on food though. I'd be tempted to get another one, maybe stainless but certainly with olive wood handle. :D
I believe if you get a patina on the blade it will protect it and will remove that metallic after taste in the food.
It has developed some patina over the years, I think it makes that taste more pronounced. I don't use it on food anymore, though. Maybe a forced patina would work differently, I don't know.
-
Are those slim Opinels flexible at the tip?
-
Received my #8 yesterday and will have my #6 later today.

Sent from my XT1254 using Tapatalk
-

Now stick it in a pineapple and leave it there till it has some attitude 8) -
I know I will get attacked by everybody on this forum for posting this :D, but I saw my first Opinel about 3-4 years ago while we were on vacation in Boone. We were at the Mast General Store and there they were in the glass case! After reading about them so much here and other places on the internet, I was anxious to get one. Was really surprised how inexpensive they were....until I picked one up. They had 4 models and they all felt like they were poorly made. I was really shocked at the locking mechanism and how it would rattle when shook. Needless to say, I did not buy one and walked away very disappointed. From what I am reading here now, I probably should have bought one and actually tried it out. Maybe I will pick one up next summer!
-
@mikekoz said:
I know I will get attacked by everybody on this forum for posting this :D, but I saw my first Opinel about 3-4 years ago while we were on vacation in Boone. We were at the Mast General Store and there they were in the glass case! After reading about them so much here and other places on the internet, I was anxious to get one. Was really surprised how inexpensive they were....until I picked one up. They had 4 models and they all felt like they were poorly made. I was really shocked at the locking mechanism and how it would rattle when shook. Needless to say, I did not buy one and walked away very disappointed. From what I am reading here now, I probably should have bought one and actually tried it out. Maybe I will pick one up next summer!Yes, at the price point it wouldn't hurt to find out what you think. If it works out then great and if not no big investment. This certainly is no tactical knife nor "hard use" knife. Funny thing is this knife is perfect IMO for the stuff I often read knife users use their knives for.
-
As a cutting tool and simply a cutting tool, you'd be hard pressed to do better. It's simply put together and doesn't have the build quality of higher end knives, but you know that when you get it. The carbon steel with the thin edge just goes through whatever you need it to. Excellent!
-
@mikekoz said:
I know I will get attacked by everybody on this forum for posting this :D, but I saw my first Opinel about 3-4 years ago while we were on vacation in Boone. We were at the Mast General Store and there they were in the glass case! After reading about them so much here and other places on the internet, I was anxious to get one. Was really surprised how inexpensive they were....until I picked one up. They had 4 models and they all felt like they were poorly made. I was really shocked at the locking mechanism and how it would rattle when shook. Needless to say, I did not buy one and walked away very disappointed. From what I am reading here now, I probably should have bought one and actually tried it out. Maybe I will pick one up next summer!I've never seen a new Opinel with obvious quality problems, and not even an old one with a rattling lock.......sounds a bit strange?
Locally, every shop that stocks them usually have a big selection, and despite only owning 2 I've handled many and bought more than a few as gifts, standard expectation for me is a lock ring that's a bit tight and wood handles looking to be handled to smooth it out......
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
