And so it begins.... (My adventures into Alox!)
-
Congrats Syph!!! Great article!!!!!
-
Congrats on the article Syph
Can't argue with that :)Sent from my SM-G920R4 using Tapatalk
-
Very nice to see you getting the recognition.
-
That's a very unusual 'nom de plume' you chose there Syph :o :D
-
Ok.. two mods done yesterday. First one is an Ti dual blade... second has a Ti mag glass in it... yep.. finally used one. :D



-
So now lets talk Ti mag glass... how to hold the bloody lens in...
So.. tried a friction fit.. fail it will fall out.
Tried epoxy, not a great look and some got on glass.. and not easily replaceable lens... fail.
Tried to paint on crazy glue around lens then fit in... still got white crusty stuff on glass.. fail.
About to give up when I thought.. why not just tap a hole through the bottom of the frame?


That was the smallest head screw I had, but a set screw would work even better (got some on order).
So first thoughts.. will it crack the lens. Nope, tightened as hard as I could and nothing. ( I could also put a dot of rubber or glue on the end so metal screw to glass contact is eliminated).
Next thought was retention. I could not dislodge the the lens with finger pressure, yet a turn of the screw released it just fine. :D
So... Ive got an easily replaceable lens system now with no downside that I can see. YES!!!
Im not 100% happy with the Ti material as a choice though so I think the future will see some brass or Al options. Ti and metal rubbing will never be as smooth as stock tools, but at least Ive solved the major issues here, and proved the design and CAD file I made works.
Here is the finished SAK with the mag glass.




-
@Syph007 said:
So now lets talk Ti mag glass... how to hold the bloody lens in...So.. tried a friction fit.. fail it will fall out.
Tried epoxy, not a great look and some got on glass.. and not easily replaceable lens... fail.
Tried to paint on crazy glue around lens then fit in... still got white crusty stuff on glass.. fail.
About to give up when I thought.. why not just tap a hole through the bottom of the frame?


That was the smallest head screw I had, but a set screw would work even better (got some on order).
So first thoughts.. will it crack the lens. Nope, tightened as hard as I could and nothing. ( I could also put a dot of rubber or glue on the end so metal screw to glass contact is eliminated).
Next thought was retention. I could not dislodge the the lens with finger pressure, yet a turn of the screw released it just fine. :D
So... Ive got an easily replaceable lens system now with no downside that I can see. YES!!!
Im not 100% happy with the Ti material as a choice though so I think the future will see some brass or Al options. Ti and metal rubbing will never be as smooth as stock tools, but at least Ive solved the major issues here, and proved the design and CAD file I made works.
Here is the finished SAK with the mag glass.




Now that's an elegant solution! Love it.
-
@Syph007 said:
So now lets talk Ti mag glass... how to hold the bloody lens in...So.. tried a friction fit.. fail it will fall out.
Tried epoxy, not a great look and some got on glass.. and not easily replaceable lens... fail.
Tried to paint on crazy glue around lens then fit in... still got white crusty stuff on glass.. fail.
About to give up when I thought.. why not just tap a hole through the bottom of the frame?


That was the smallest head screw I had, but a set screw would work even better (got some on order).
So first thoughts.. will it crack the lens. Nope, tightened as hard as I could and nothing. ( I could also put a dot of rubber or glue on the end so metal screw to glass contact is eliminated).
Next thought was retention. I could not dislodge the the lens with finger pressure, yet a turn of the screw released it just fine. :D
So... Ive got an easily replaceable lens system now with no downside that I can see. YES!!!
Im not 100% happy with the Ti material as a choice though so I think the future will see some brass or Al options. Ti and metal rubbing will never be as smooth as stock tools, but at least Ive solved the major issues here, and proved the design and CAD file I made works.
Here is the finished SAK with the mag glass.




That is excellent!!!!!!!

-
Great job as usual

-
THAT is fantastic...
-
Love the mag glass Syph

Sent from my SM-G920R4 using Tapatalk
-
OK - That's three more adjectives (persistent, resilient, determined) - I have to add to my list of adjectives (technically brilliant, inspired, creative, imaginative, original, oozing quality) that I use to describe you and your work :D
PS. Does the holder have a wee ledge all the way round for the glass to rest against - So it cannot come out in one direction - then the screw holds it in and against the ledge?
-
One word. :gimmie:
-
One word, brass!
-
@HarleyXJGuy said:
One word, brass!Ya I was just ordering a piece the right thickness... Id like a Ti explorer, brass mag glass holder, brass liners, brass cross, brass tweezer.... yup... that would be good.... or the same as a yeoman config.
-
Does the mag glass hold the olde style or new style lens?
-
One word, brass!
Ya I was just ordering a piece the right thickness... Id like a Ti explorer, brass mag glass holder, brass liners, brass cross, brass tweezer.... yup... that would be good.... or the same as a yeoman config.
You think?
-
Simple and elegant solution. Good job, Syph007

-
Brilliant!!
Sent from my E6653 using Tapatalk
-
I can't see a little nub to deploy the mag glass. Could you position the set screw for double purpose?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login