Website or Book?
-
Sorry to drag this up from the depths.
I was looking at a project on Kickstarter and it seems a lot of staggeringly obscure titles are being funded successfully at the moment
I was looking at

I don't think it can get more obscure than a book about a small software house , who mainly produced games for 1980's home computers ..... don't get me wrong I think its great and I would happily invest in this very book I think the world will be a better place with this in it :)
This was a nice looking book as well

It just seemed to me a possible way that a book or books could be supported with lots of different levels of support from a PDF of the final book up to a Hand Illustrated hard back on vellum :)
My main driver for bringing this up again is I was using my favorite reference book "British Military Timepieces" last night , and wishing I had the same for my knives .This book was written by a collector and is one of the best books I own and is considered to be the definitive work on the subject ....( it was also one of the most expensive books I have ever bought > $180 but well worth it it is a thing of beauty ) ....
If you ever decided to look into this I would like to think it would be a very popular project :)
-
@jazzbass said:
Thought I'd post an update on the book. It is now books, not book. Originally my idea was to write about both simultaneously. I figured that yes, there are some minor difference in tool changes of the years (e.g. 84mm knives get 2.0mm blades at least 10 yrs before 91mm ones do), but the vast majority of the changes happened simultaneously and could be documented as such.Well, as I started organizing my research I've found there are a lot more differences than I originally thought. Trying to write about both product lines in the same chapter ends up being confusing, and if I break them out into their own separate sets of chapters, it essentially becomes two books. So that's what I've decided to do - write an 84mm and a 91mm book following the same basic format. I also realized while compiling a list of all known models of knives that there's a hell of a job ahead of me. I documented 48 different 84mm models and 125 different 91mm models, including all special run models that I know of.
**Good news from Ibach - Victorinox has given me permission to use their trademarks in the book, which is a pretty big relief. I'm not sure what the laws are regarding using a company's trademarks in a written work (with pictures) - can you do it without permission under fair use? No clue, but unsurprisingly Victorinox is being very helpful and supportive of this effort so it's not something I have to worry about. They really are a great company. **
Finally - I'd like some opinions. In outlining the section on the different knife models I decided that for ease of reference I want to have a unique name for each different model of knife. The plan is to list all "aliases" under the name (e.g. The Artisan, aka Craftsman), but each model should get it's own "reference" name. The problem is Victorinox has recycled a lot of names and many knives don't have unique names. Three in particular I'm thinking of are the Angler, Craftsman, and Handyman. These are all names that refer to current production knives. However, pre-1987, these names were used on different models.
My plan is to use any name currently in use to refer to the model currently in production. So, if I refer to a "Handyman", that means the current incarnation of that model (Ranger w/ pliers), and not the older version (Ranger w/ fish scaler). So what to call the older version?
- Handyman Classic
- Handyman Original
- Something else
Any thoughts are appreciated. Thanks!
I know I am late, but.... that is good news about the use of the trademark!
I know your day job and life in general are priorities #1 and #2, but just so you know, there are still some of us out here who are ready to buy your works once they are released. the interest level has not diminished
-
+1
-
Definitely looking forward to the book(s).

-
And while we're wating for the book (I would personally happily buy an electronic version, but I'd probably not anything coffee table style from dead trees), we really appreciate they way you're sharing your research materials in different threads on the forum.
-
@Steinar said:
And while we're wating for the book (I would personally happily buy an electronic version, but I'd probably not anything coffee table style from dead trees), we really appreciate they way you're sharing your research materials in different threads on the forum.I feel the same way, and you try to express gratitude for his help, but it just does not seem like enough.
I would probably by both the electronic and the printed version.
-
@Steinar said:
And while we're wating for the book (I would personally happily buy an electronic version, but I'd probably not anything coffee table style from dead trees), we really appreciate they way you're sharing your research materials in different threads on the forum.
Your generosity and knowledge are wonderful. -
/joking
Maybe jazzbass is just waiting for there to be 500 posts in this thread before announcing hi book

/jokingin all seriousness I try to gleam as much as I can from his prior posts, and there is some amazing info squirreled away in the forum.
My hopes are high for the books, simply do to the fact that I know how helpful he is here on the forum. He does not simply say "Circa 1972", he explains why, which educates those of us who are eager for this knowledge.
I hate to even say this, people might think I am being greedy, but I am just sharing my thoughts. I know jazzbass already does enough for us, and I am not complaining.
I would even enjoy a "jazzbass 91 & 84 monthly newsletter" I would pay for that! even if it was different info than the books, things like ebay trends, average SAK price versus inflation, or just things he has already done in the forum, like his unusual SAK thread.
-
I'm glad to hear that you're making good progress. Just a bit of advice that you should consider. When you're nearing completion, ask one of our knowledgeable members to go over the proofs. You'll be surprised how easy it is to overlook simple mistakes. Your eyes can deceive you no matter how many times you may have gone over the material yourself. I speak from personal experience. Those damned errors! How did I miss them?
-
Funny to see this thread resurface. The book is still in the works, albeit slower than I'd hoped. A good 75% of the delay is just life - getting kids through high school (one down, one to go) and working for a start up company. The rest is fleshing out my research. The thing that I hope will set this book apart from others is that most of the details - especially in tool evolution - are based on observation, not various "facts" or innuendo floating around the internets. All written details about tool evolution, dates, etc. I try to verify through observation.
You'd be surprised at how many of the facts - some that come straight from Victorinox themselves - are not supported by observation. Quick example - Vicotrinox's own PR info says:
**1973 **Magnifying glass and Phillips screwdriver, small blade with pointed tip instead of the old shape.
**1977 **Small screwdriver (on the back of the knife).So - four years difference between dropping the clip point pen blade and the intro of the small screwdriver back tool. So we should be able to observe this - there should be no knives with clip point pen blades and fine screwdrivers, there should be some early 70s knives with drop point pen blades and no fine screwdriver, and then we should see the typical drop point + fine screwdriver combos.
That's what we should see, but we don't. What we do see is that the fine screwdriver is introduced well before the change in the pen blade shape. There are a significant number of Craftsmans, Handymans, mag glass Champions, Rangers and Grand Prixs out there with clip point pen blades and fine screwdrivers. I have probably 10 in my collection alone, and many more in my auction database. So which data point is wrong then? In this case I'd bet money on the 1977 date for the intro of the fine screwdriver. The 1973 date for the pen blade change is supported by other data, so I think the date for the screwdriver is wrong.
This is just one example of many that I've found. The point I'm getting to is that taking this approach requires lots and lots of data. Both collected (which I've done well) and cataloged correctly (which I've done a little less well). The more data I collect, the better I am at reconstructing the history of these knives. This thread was started 2 years ago, and since that time I've learned things about early knife development that have caused me to rewrite a LOT of my initial chapters on early knife and tool development.
At this point, the main task is to catalog all my knives and the knives I've see sold in a way that lets me arrange them in chronological order. Once that's done (and this process has started), then I can get to writing in earnest.
-
I'll go on record now and say I'll be buying one when they come out.

-
good luck Jazzbass. I look foward to seeing the fruits of your labor, and hope that you will be satisfied with the results. Its one tthing to have a hobby or a collection. Its another to have a significant impact on the realm of that hobby. You are working to better your hobby, and enrich and enlighten your fellow collectors. Even though I don't collect SAKs myself, I can certainly appreciate what you are doing. -
hmm, jazzbass might put the first printed copy on ebay, with great pictures of the contents, and call it the RARE Swiss army knife encyclopedia.
bidding war! (by people not here at MTO)

two weeks later book sales start in earnest
-
Even though I mainly collect Alox I would also buy this as a book.
Reminds me of a rare book that I picked up recently.
Took me years to finally get one.
Expensive, but almost all the info that can only be found in this book.

-
Nice NSA!!! Wow, I've bought the pistols cheaper than some of those book prices.
-
Since this thread has bubbled back to the top, I'll use it to solicit some feedback.
One thing I plan to do with the book is include details of each known model. They'll be marked as "standard production" (Spartan, Huntsman, etc), "limited production" (Angler Deluxe, Mechanic Jr, etc) or "custom configuration" (Fuchs customs, VSAKS Doctor, etc), but the one thing they have in common is they were produced by Victorinox. I might add a section about mods, but I don't plan on going into details on specific mod models as they're like snowflakes - just too many to cover and they're not "official". But yes, one of my main goals is for there to be an "encyclopedia" section where you can look up any model you find.
So that leaves a sort of grey area - SwissBianco customs. For those that are new, the knives you get from SwissBianco today are 100% assembled by Victorinox in Ibach, fully warrantied, etc., so to me they fall in the "custom configuration" category and will be included. However, some of his early mods (back from 2008-2009) were actually hand assembled by Roger from new Victorinox factory parts. This includes the early Yeoman Mechanic (I have one and you can see it's clearly hand assembled), the 91mm Lumberjack Plus, and (I think) his original run of Scientists from 2010.
Where do you feel these fall in the continuum? Are they mods just as much as anything that Syph makes, as they were hand assembled from parts and not built in the Victorinox factory? Or are they sort of quasi-official models since they were made with the blessing of (and warrantied by) Victorinox themselves? I know what I think about this, but I'm curious to hear other people's thoughts.
Yes, I know there are some less-than-positive feelings here with some about SwissBianco and his views on modding. But I want to approach this as a historian, not as someone with an axe to grind (which I'm not to be honest - I personally bear Roger no ill will).
-
@jazzbass said:
Since this thread has bubbled back to the top, I'll use it to solicit some feedback.One thing I plan to do with the book is include details of each known model. They'll be marked as "standard production" (Spartan, Huntsman, etc), "limited production" (Angler Deluxe, Mechanic Jr, etc) or "custom configuration" (Fuchs customs, VSAKS Doctor, etc), but the one thing they have in common is they were produced by Victorinox. I might add a section about mods, but I don't plan on going into details on specific mod models as they're like snowflakes - just too many to cover and they're not "official". But yes, one of my main goals is for there to be an "encyclopedia" section where you can look up any model you find.
So that leaves a sort of grey area - SwissBianco customs. For those that are new, the knives you get from SwissBianco today are 100% assembled by Victorinox in Ibach, fully warrantied, etc., so to me they fall in the "custom configuration" category and will be included. However, some of his early mods (back from 2008-2009) were actually hand assembled by Roger from new Victorinox factory parts. This includes the early Yeoman Mechanic (I have one and you can see it's clearly hand assembled), the 91mm Lumberjack Plus, and (I think) his original run of Scientists from 2010.
Where do you feel these fall in the continuum? Are they mods just as much as anything that Syph makes, as they were hand assembled from parts and not built in the Victorinox factory? Or are they sort of quasi-official models since they were made with the blessing of (and warrantied by) Victorinox themselves?
Yes, I know there are some less-than-positive feelings here with some about SwissBianco and his views on modding. But I want to approach this as a historian, not as someone with an axe to grind (which I'm not to be honest - I personally bear Roger no ill will).
I understand your conundrum, and think that no matter which route you take, as long as you preface your decision in the into (or preface area) and explain your stance, the reader will have no problems at all.
to me personally they are just mods, and not a Victorinox product, but a product made of Victorinox parts, much in the same way I could take parts from a Chevy Truck, a Chevy Corvette, and a Chevy Malibu, and make a vehicle. it is not a Chevy product, but it is a Chevy in many respects. however the difference here is SwissBianco SAKs now are a Victorinox Product, where they were not before.
I Wish you luck figuring this enigma out.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


