OPINELS
-
@mikekoz said:
I know I will get attacked by everybody on this forum for posting this :D, but I saw my first Opinel about 3-4 years ago while we were on vacation in Boone. We were at the Mast General Store and there they were in the glass case! After reading about them so much here and other places on the internet, I was anxious to get one. Was really surprised how inexpensive they were....until I picked one up. They had 4 models and they all felt like they were poorly made. I was really shocked at the locking mechanism and how it would rattle when shook. Needless to say, I did not buy one and walked away very disappointed. From what I am reading here now, I probably should have bought one and actually tried it out. Maybe I will pick one up next summer!I've never seen a new Opinel with obvious quality problems, and not even an old one with a rattling lock.......sounds a bit strange?
Locally, every shop that stocks them usually have a big selection, and despite only owning 2 I've handled many and bought more than a few as gifts, standard expectation for me is a lock ring that's a bit tight and wood handles looking to be handled to smooth it out......
-
My Opinel slipped of my pants before wearing them yesterday and I worked for 13 hours without it. Needless to say I felt naked. The Minichamp and Ladybug did the work but it seems I'm much attached to the Opi that bears my beloved wife's name.
-
Yeah, while I wouldn't term Opinels as paragons of F&F, I've never handled a new one with a rattling lock. I've handled quite a few where the lock was rather stiff, but that's not much of a problem, IMHO. Not the first time I've been surprised by what others have found here. I'd say you did the right thing by not buying a knife there , mikekoz, since it sounds like there were problems with the knives on display. Personally, I'm a big fan of the minimalist construction of the Opinels.
-
The wooden ones may get a bit looser, if the wood dries a lot, and vice versa (I got one, from France, that was stiff and after a few days in our climate it dried and became very smooth - stayed that way since).
Some are just naturally looser, or, tighter than others. (I must avoid writing what I am thinking of now.
)The plastic ones will be more consistent and unaffected by such changes.
The fancier models should be better, at least in theory.
You can adjust most of the wooden ones with slight hammering/pliers etc.
However, from my experience, I would only buy a wooden opinel if i can play with it first.
Usually, I go to the dealer and try several, until I find one that I am happy with. This way I have handled probably a hundred or more, and I would say that only 1/3, of the regular ones, I was really happy with the "feel".
-
@dks said:
The wooden ones may get a bit looser, if the wood dries a lot, and vice versa (I got one, from France, that was stiff and after a few days in our climate it dried and became very smooth - stayed that way since).
Some are just naturally looser, or, tighter than others. (I must avoid writing what I am thinking of now.
)The plastic ones will be more consistent and unaffected by such changes.
The fancier models should be better, at least in theory.
You can adjust most of the wooden ones with slight hammering/pliers etc.
However, from my experience, I would only buy a wooden opinel if i can play with it first.
Usually, I go to the dealer and try several, until I find one that I am happy with. This way I have handled probably a hundred or more, and I would say that only 1/3, of the regular ones, I was really happy with the "feel".
Must.resist.puns.
-
Zoid, it was very hard..., really really hard... so hard that..... never mind

-
:D

-
@dks said:
The wooden ones may get a bit looser, if the wood dries a lot, and vice versa (I got one, from France, that was stiff and after a few days in our climate it dried and became very smooth - stayed that way since).
Some are just naturally looser, or, tighter than others. (I must avoid writing what I am thinking of now.
)The plastic ones will be more consistent and unaffected by such changes.
The fancier models should be better, at least in theory.
You can adjust most of the wooden ones with slight hammering/pliers etc.
However, from my experience, I would only buy a wooden opinel if i can play with it first.
Usually, I go to the dealer and try several, until I find one that I am happy with. This way I have handled probably a hundred or more, and I would say that only 1/3, of the regular ones, I was really happy with the "feel".
Spoken like a boss...
Spoiler:
A real boss...

-
I'm new to Opinel as well. I just received a #8 and a #6. The 1st one seemed fine. The #6 came with a terrible blade, sort of toothy with unsharpened spots.
Neither has a issue with fit or the lock. I'll purchase more of these.
Sent from my XT1254 using Tapatalk
-
@dks said:
The wooden ones may get a bit looser, if the wood dries a lot, and vice versa (I got one, from France, that was stiff and after a few days in our climate it dried and became very smooth - stayed that way since).
Some are just naturally looser, or, tighter than others. (I must avoid writing what I am thinking of now.
)The plastic ones will be more consistent and unaffected by such changes.
The fancier models should be better, at least in theory.
You can adjust most of the wooden ones with slight hammering/pliers etc.
However, from my experience, I would only buy a wooden opinel if i can play with it first.
Usually, I go to the dealer and try several, until I find one that I am happy with. This way I have handled probably a hundred or more, and I would say that only 1/3, of the regular ones, I was really happy with the "feel".
I laughed out loud while reading this.
Does anyplace in the states sell these. Like somewhere I could feel them up before I bought it?
-
-
Thanks everybody! I am going to pick one up the next time we go to Boone, which will probably be next June. I will definitely play with the one they sell me before I take it out of the store. I just use a knife for everyday, lightduty, mundane things. I am sure it will be a nice addition to my collection. I may even get tempted to order one online beforehand. June is a long time off when you are impatient!!! >:D
-
All I can add to that is that while there is a variation in knives (wood will always have variations), I have spent far more on knives that are not nearly as good at cutting than Opinels.
Def
-
Ordered a #6 and #8 Trekking model today, with Inox. Now, I have to find a nice belt sheath for the #8 to EDC.
Sent from my XT1254 using Tapatalk
-
I am actually looking at getting a Opinel Bricolage Knife No.9. It has a couple of other tools on it and has a driver on the handle with a few bits.
-
Another landed this morning. If you are quick you can still find these 125th anniversary editions for sale.



-
@mikekoz said:
I am actually looking at getting a Opinel Bricolage Knife No.9. It has a couple of other tools on it and has a driver on the handle with a few bits.I haven't handled a Opinel Bricolage Knife but I think the drivers should be longer for the thing to be useful; as it is now I'm getting the impression the handle's bottom part might get in the way. Were there not for that cutout in the handle, I'd have already got one fitted with the usual Opinel blade.
I love that yatagan style blade

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



