SAK dating info
-
While goofing off at SAK wiki at http://www.sakwiki.com/ti...index.php?page=Can+Opener
I ran across this line
The Can-Opener is a tool with a lot of history. The can-opener appeared on the first Swiss Army Knife in 1817.
Either the 1817 is a typo, or the Term Swiss Army Knife should not be there, or I am just an idiot. if you can help me decide which is the truth I would appreciate it.
I do realize that my being an idiot is not dependent on 1817 being wrong, or Swiss Army Knife being wrong.

thank you and once we have this worked out we can get SAKwiki updated to help us all out.
-
Hey Detron,
Thanks so much for these spreadsheets
They are just great - And I can imagine how much work went into creating them.
I have downloaded them to my PC and colour coded models that I have in your spreadyLike you (and probably most of us) - I am very keen to date SAKs so this is very useful
For the sheet with the models on it did you say you were working on adding in dates when models were introduced/retired?
That would be just great if it were possible. Or did I miss this?For the tools spready I can see afew enhancements - Sorry!!

-
Different versions of the:
Metal file; wood saw; phillips driver (ie Can key, square, rounded etc) fish thingy w w/o ruler.....; the can opener; the screwdriver (wire stripper notch, wire stripper on curved bit etc) -
Also the bail; the old Soldier version of the reamer/awl'; Clip point vs drop point small blade
A lot of this is in the brilliant SAAMS webpage:
http://victorinox.metodi.me/91mmtools.php#scissors
Hope this is helpful..
Keep up the good work :)
-
-
Thanks so much for these spreadsheets
They are just great - And I can imagine how much work went into creating them.
I have downloaded them to my PC and colour coded models that I have in your spreadyLike you (and probably most of us) - I am very keen to date SAKs so this is very useful
For the sheet with the models on it did you say you were working on adding in dates when models were introduced/retired?
That would be just great if it were possible. Or did I miss this?For the tools spready I can see afew enhancements - Sorry!!

- Different versions of the:
Metal file; wood saw; phillips driver (ie Can key, square, rounded etc) fish thingy w w/o ruler.....; the can opener; the screwdriver (wire stripper notch, wire stripper on curved bit etc)
- Also the bail; the old Soldier version of the reamer/awl'; Clip point vs drop point small blade
A lot of this is in the brilliant SAAMS webpage:
http://victorinox.metodi.me/91mmtools.php#scissors
Hope this is helpful..
Keep up the good work :)
Huntsman, I am glad you found them useful, and though I would love to add dates when models were added, I have no clue about that information, however, one of our members here is working on a book to discuss SAK dating, and in my opinion this person is THE SAK expert.
I know his book will require a lot of work, and though I know it is a labor of love for him, I cannot wait to read it once it is released (if it gets released)
I might even take a few days off of work just to devour that book. - Different versions of the:
-
@detron said:
Huntsman, I am glad you found them useful, and though I would love to add dates when models were added, I have no clue about that information, however, one of our members here is working on a book to discuss SAK dating, and in my opinion this person is THE SAK expert.I know his book will require a lot of work, and though I know it is a labor of love for him, I cannot wait to read it once it is released (if it gets released)
I might even take a few days off of work just to devour that book.This me? If so, the book is actively being written as we speak. The last couple months were spent on SAK research, photography research, and book/typography design work. Things are coming along and I'm focusing on just the manuscript now. Might post a sample chapter here soon.

-
Huntsman, I am glad you found them useful, and though I would love to add dates when models were added, I have no clue about that information, however, one of our members here is working on a book to discuss SAK dating, and in my opinion this person is THE SAK expert.
I know his book will require a lot of work, and though I know it is a labor of love for him, I cannot wait to read it once it is released (if it gets released)
I might even take a few days off of work just to devour that book.This me? If so, the book is actively being written as we speak. The last couple months were spent on SAK research, photography research, and book/typography design work. Things are coming along and I'm focusing on just the manuscript now. Might post a sample chapter here soon.

Awesome! Glad it is still moving forward
Sent from my SPH-L720 using Tapatalk
-
Looking forward to the sample chapter.

-
so I decided to try a new approach at an inventory spreadsheet that helps date the SAK as well. I am trying to make this into a database, but I know excel so much better than Access, so I wanted to test my proof of concept in a format I understand.
I know this is NOT the way many people would do it, but I thought if anyone wanted my sheet, then I would share it
the video description of this spreadhsheet can be watched here
after watching the video, read below
near the end of the video I discus the pin hole on the scales. as it turns out those scales were replaced, so the SAK is 1987-1990, not TRANS 1990-1991 as I said. I was too lazy to do that video over.
the file is located here
now, another thing I am working on slowly with this spreadsheet is using pictures in comments. if you go to the "front tools table" sheet and hover over the different can openers, you will see them pop up.
-
the tables are all stored in the other sheets (Front Tools Table, Back Tools Table, Tang, and Other Tables) and the the "Model Name" is pulled from the "91mm ID" sheet if you have a model not in the drop down, just simple add it to the table in question and it will show up in the drop down.
-
Detron, I think this excel spreadsheet thing is probably a very good idea, but I cant help but feel very intimidated by it (and im a pretty young guy, and fairly computer literate, to boot). Admittedly, I havent watched the video yet, but I can only imagine how some of our computer illiterate members feel reading that.
So my point is... Is there a manual I can read?

-
I don't have MS Office so it won't open.....I was hoping there was a giant jpeg or pdf of of the chart that I could look at.

-
@sLaughterMed said:
Detron, I think this excel spreadsheet thing is probably a very good idea, but I cant help but feel very intimidated by it (and im a pretty young guy, and fairly computer literate, to boot). Admittedly, I havent watched the video yet, but I can only imagine how some of our computer illiterate members feel reading that.So my point is... Is there a manual I can read?

the video is a short manual
-
Detron, I think this excel spreadsheet thing is probably a very good idea, but I cant help but feel very intimidated by it (and im a pretty young guy, and fairly computer literate, to boot). Admittedly, I havent watched the video yet, but I can only imagine how some of our computer illiterate members feel reading that.
So my point is... Is there a manual I can read?

the video is a short manual
Just finished watching. Gotta say, that was much easier looking than I thought. Great job!

-
I don't have MS Office so it won't open.....I was hoping there was a giant jpeg or pdf of of the chart that I could look at.

if you have open office or Libre Office I will save in a format you can use. if not I will make it work for you one way or another
Thank you! I don't have any office apps on my laptop.
-
I don't have MS Office so it won't open.....I was hoping there was a giant jpeg or pdf of of the chart that I could look at.

if you have open office or Libre Office I will save in a format you can use. if not I will make it work for you one way or another
Thank you! I don't have any office apps on my laptop.
I will export this into a format you can use, but in the mean time, Libre Office is free, runs on Windows, Mac, or Linux, and is really nice.
-
I don't have MS Office so it won't open.....I was hoping there was a giant jpeg or pdf of of the chart that I could look at.

if you have open office or Libre Office I will save in a format you can use. if not I will make it work for you one way or another
Thank you! I don't have any office apps on my laptop.
I will export this into a format you can use, but in the mean time, Libre Office is free, runs on Windows, Mac, or Linux, and is really nice.
I'll work on getting Libre Office downloaded.

-
@detron said:
so I decided to try a new approach at an inventory spreadsheet that helps date the SAK as well. I am trying to make this into a database, but I know excel so much better than Access, so I wanted to test my proof of concept in a format I understand.I know this is NOT the way many people would do it, but I thought if anyone wanted my sheet, then I would share it
the video description of this spreadhsheet can be watched here
after watching the video, read below
near the end of the video I discus the pin hole on the scales. as it turns out those scales were replaced, so the SAK is 1987-1990, not TRANS 1990-1991 as I said. I was too lazy to do that video over.
the file is located here
now, another thing I am working on slowly with this spreadsheet is using pictures in comments. if you go to the "front tools table" sheet and hover over the different can openers, you will see them pop up.
This is great! (Spreadsheets FTW)
-
@detron said:
so I decided to try a new approach at an inventory spreadsheet that helps date the SAK as well. I am trying to make this into a database, but I know excel so much better than Access, so I wanted to test my proof of concept in a format I understand.I know this is NOT the way many people would do it, but I thought if anyone wanted my sheet, then I would share it
the video description of this spreadhsheet can be watched here
after watching the video, read below
near the end of the video I discus the pin hole on the scales. as it turns out those scales were replaced, so the SAK is 1987-1990, not TRANS 1990-1991 as I said. I was too lazy to do that video over.
the file is located here
now, another thing I am working on slowly with this spreadsheet is using pictures in comments. if you go to the "front tools table" sheet and hover over the different can openers, you will see them pop up.
this should have said 1987 - 1990, not 1978-1990.
MODs, can you fix that in the post to avoid further confusion? thank you
-
found a bug in the spreadsheet.

I will have it fixed and uploaded in the next day or so. I forgot to lock some cell references, so the first entry will work great, but subsequent rows will be wrong.
I will post here when done
-
problem fixed, here is the updated sheet
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login