DIY pivot tool
-
Hi All
I had an idea for making a tool to adjust the pivot on the majority of my Enlans....that funny Mercedes-badge one...
Anyway, my idea is to take a piece of pipe or tubing of the (almost) correct size, mix up and fill the tube metal putty (or any epoxy putty for that matter), then press the one end onto the pivot so it leaves an indent.
Think this will work? I'm somewhat scared of messing up a knife in the process.
Anyway.......nothing but planning till pay day

-
Whatever adhesive you use is unlikely to stay stuck to the inside of the tube for long, so maybe some kind of pin or peg spanner would be better? Three screws with heads that match the diameter of the cutouts in the pivot in the right triangular pattern in a piece of wood should do it.
-
My first plan was to drill hole in a piece of round bar and the file & dremmel out the 3 prongs.
Thanks, your idea has given me another option.....
-
@hiraethus said:
Whatever adhesive you use is unlikely to stay stuck to the inside of the tube for long, so maybe some kind of pin or peg spanner would be better? Three screws with heads that match the diameter of the cutouts in the pivot in the right triangular pattern in a piece of wood should do it.I think the wood screw idea is probably best, unless you happen to have some pin spanners handy. Great idea hirathus!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login