Spirit owners club
-
Question to all spirit owners: I have a spirit x but I want to know if the original blade on the spirit functions as a true serrated blade? Or is it some type of hybrid. I want to combo my spirit with a compact but the only "duplication" would be the blade. I am thinking the original spirit would better pair with it simply because it has a serrated blade instead of the plain edge. What are your thoughts? I need help
Also this is post number 1,000!!!!!!

-
Congrats on NLC!

The standard Spirit blade has enough plain edge to sharpen a pencil and the like. Not sure what you mean about "true" serrated? If you mean fully serrated, then no, but if you mean serrated like most kitchen serrated blades, then yes, it works just as fine as any other serrated blade in my experience. Pairs up well with the Compact or a 93mm plain edge, or any PE blade for that matter. :)

-
Congrats on NLC status Demel

I agree that the original blade is better since it can be paired with a plain edge. The butterblade is great anyway

Sent from my SM-G920R4 using Tapatalk
-
Congrats D!!!

-
-
@twiliter said:
Congrats on NLC!
...but if you mean serrated like most kitchen serrated blades, then yes, it works just as fine as any other serrated blade in my experience...
Yes that's what I mean. Like other serrated blades. Wave, rebar, mp600, etc... all have dedicated serrated blades. I wanted to know if the spirit blade was similar. you answered my question well. thanks.
@Monrogue said:
Congrats on NLC status Demel
I agree that the original blade is better since it can be paired with a plain edge. The butterblade is great anyway

Sent from my SM-G920R4 using Tapatalk
That is what I'm thinking.
Congrats D!!!

+1 and welcome to the NLC

Thank you thank you

-
first welcome. second, someone get the lard and the chicken
-
On it!
-
It is a rite of passage
-
Instead of replacing my spirit x just to get the butter blade, would it be possible to just add serrations to the main blade?
-
should be. I think Kampfer might have some experience doing that
-
Well I hate my Spirit [emoji52], since I got it few months ago, it makes me leave my Swisschamp and my Deluxe Tinker at home. I always pair the Spirit with Compact or Manager.
Sent from my GT-N7000 using Tapatalk
-
Got my Christmas Spirits for 2015 . One to add to my stable , one for someone else . At the same time , I also picked up a Delmont collection , nail clipper penknife .
Chris
-
@Demel said:
Instead of replacing my spirit x just to get the butter blade, would it be possible to just add serrations to the main blade?You could like anything else Youtube'it to find a tutorial on how too. Most likely all you'd need is a vise, thin fine circular file or ceramic rod,(doubt you'd find a really thin ceramic rod though) along with a steady hand. Personally I'd be too afraid of possibly ruining a good blade. I'd keep the X model and just get the standard if it was financially feasible. Things may go on sale soon, and both may have a place in your EDC rotation. Serrated for work, plain edge for EDC.
If your interested I do have a excellent condition (and I do mean excellent condition) used standard model I may be interested in trading...maybe. I personally prefer a straight edge due to ease of maintenance, but see serrations usage for thicker heavier duty materials.
Let me know. I'm located in the US if your wondering.
-
@Demel said:
Instead of replacing my spirit x just to get the butter blade, would it be possible to just add serrations to the main blade?I'm sure there'll be someone (now or in the near future) who'd like an X rather than their standard model. It'll be a lot easier to trade/straight swap with the right person than try to serrate a blade without screwing it up. ;)
Personally I prefer the X, and have one plus an RT, and traded away both mine that had the butter blade. All you need is the right person on the trade forum, and two people will be very happy with minimum risk and hassle

Normally, I actually prefer my multitool blade to be different from my folder, and quite welcome a serrated or CE blade. For some reason I never got along with the Spirit butter blade though. Some people love it though, so don't let me put you off trying it out, just don't knacker up your X and do someone out of a good trade

-
@50ft-trad said:
Instead of replacing my spirit x just to get the butter blade, would it be possible to just add serrations to the main blade?
I'm sure there'll be someone (now or in the near future) who'd like an X rather than their standard model. It'll be a lot easier to trade/straight swap with the right person than try to serrate a blade without screwing it up. ;)
Personally I prefer the X, and have one plus an RT, and traded away both mine that had the butter blade. All you need is the right person on the trade forum, and two people will be very happy with minimum risk and hassle

Normally, I actually prefer my multitool blade to be different from my folder, and quite welcome a serrated or CE blade. For some reason I never got along with the Spirit butter blade though. Some people love it though, so don't let me put you off trying it out, just don't knacker up your X and do someone out of a good trade

I agree on all accounts as far as different blade options. I do not have the skills of adding my own serrations so that is out of the question. Trying to swap sounds good.
Instead of replacing my spirit x just to get the butter blade, would it be possible to just add serrations to the main blade?
You could like anything else Youtube'it to find a tutorial on how too. Most likely all you'd need is a vise, thin fine circular file or ceramic rod,(doubt you'd find a really thin ceramic rod though) along with a steady hand. Personally I'd be too afraid of possibly ruining a good blade. I'd keep the X model and just get the standard if it was financially feasible. Things may go on sale soon, and both may have a place in your EDC rotation. Serrated for work, plain edge for EDC.
If your interested I do have a excellent condition (and I do mean excellent condition) used standard model I may be interested in trading...maybe. I personally prefer a straight edge due to ease of maintenance, but see serrations usage for thicker heavier duty materials.
Let me know. I'm located in the US if your wondering.
Send me a pm with pics and maybe we can work something out.
-
Ok, had my standard Spirit for a couple of weeks now so I guess I'm in.
I've carried it every day (paired with an Explorer) and used it loads. I like the pliers, you can certainly apply plenty of power and they feel like they can take it. Used the file, chisel, opener/pry, philips head driver, blade and snips (I don't count them as scissors). No complaints
at all. It sits fine in my pocket....in fact it's oddly less noticeable than the Explorer. I wouldn't mind a really thin slim-fit leather sheath (the kind with no fastener) but doubtless I'll stumble across something.I see there's a lot of debate about the snips (scissors) but I don't really get it....brilliant wee tool with lots of uses. The chisel and serrated blade are great.
Only thing I noticed is as the tool rotates the file can be an irritant if you are using the philips for more than 5 minutes but I'd hardly call it an issue.
Doubt I'll ever use the L driver, bits, corkscrew and large leather sheath that came with it as accessories....maybe I'll try and swap them for a Compact, which I think will pair up with this better than the Explorer.
-
@Dunkeld said:
Only thing I noticed is as the tool rotates the file can be an irritant if you are using the philips for more than 5 minutes but I'd hardly call it an issue....maybe I'll try and swap them for a Compact, which I think will pair up with this better than the Explorer.
Phillips for 5 minutes would send me running for a drill/driver, but I have noticed if you open the opposing handle and have a longer driver, it's more comfortable than using it fully closed.

The Compact pairs up with the Spirit perfectly (except the lack of small blade), and I use this combo frequently. The robust tools of the Spirit are great for mechanical and general household, and even industrial use, while the Compact fills in the gaps for delicate or more precision tasks, the scale tools are very handy.
I keep a Plus kit in my tool bag, it works well for a grab-and-go repair kit, but agree, not necessarily a good EDC choice (for me anyway). :)
You are definitely in, especially if you are pocket carrying it.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
