My Knipex tools.
-
@HarleyXJGuy said:
I wish you guys would be more clear, the Knipex plier wrench is good?Thinking of adding a small one to my EDC backpack.
Yes, very good if you want a smooth gripping area. Its sort of like a crescent wrench, but easily adjustable and has two handles which can be used like pliers.
If you want something to grip anything get the Cobra Plier.
-
@captain spaulding said:
I wish you guys would be more clear, the Knipex plier wrench is good?
Thinking of adding a small one to my EDC backpack.
Yes, very good if you want a smooth gripping area. Its sort of like a crescent wrench, but easily adjustable and has two handles which can be used like pliers.
If you want something to grip anything get the Cobra Plier.
Looks like the only real solution is to buy both.
-
@comis said:
Sorry for not making it too clear, but maybe the following pictures will do a better job describing what I look for:
Could any owners of Knipex please kindly confirm which wrench/pliers wrench could nest which size of SAK?(just as the pix shown above?)
ah! Now that I see what you mean by nest, I would have agree the 7 1/4 Alligator or Cobra pliers.
In my opinion the Alligator (I prefer them over the cobra to get into the tightest of places) is a tool everyone (who has ever needed to use a pair of pliers) needs to have! Once you get it and use it for a while the next logical progression is the pliers wrench.
Basically if you use a crescent wrench a lot, get the pliers wrench. If you often use a pair of pliers, channel locks more get the Cobra or Alligator. Far superior to Channel Lock type. Do NOT fall for the Irwin clone though, they are complete rubbish compared to Knipex.
I firmly believe you could dismantle a small brick building using nothing but a pair of their 12" pair of Alligator pliers & linesman pliers [emoji23]
-
I'm a big fan . I have a reasonable variety of Cobras , Alligators , and Plier Wrenches . I always EDC a 5" PlierWrench in my front pocket .
All very nice tools!
Chris
-
I have a cheap Stanley set of pliers/wrenches that I'm just not happy with. When possible I plan to upgrade if not to Knipex to something decent quality. I do have a nice set of Channellocks I'm pretty keen on however.
-
@captain spaulding said:
I wish you guys would be more clear, the Knipex plier wrench is good?
Thinking of adding a small one to my EDC backpack.
Yes, very good if you want a smooth gripping area. Its sort of like a crescent wrench, but easily adjustable and has two handles which can be used like pliers.
If you want something to grip anything get the Cobra Plier.
Looks like the only real solution is to buy both.
Sounds like the best option.

-
@HarleyXJGuy said:
I wish you guys would be more clear, the Knipex plier wrench is good?Thinking of adding a small one to my EDC backpack.
Good? Great!
-
@ToolJoe said:
What brand are those black pliers? Those look slick..Errr...it's just a black pliers that I've picked up from local hardware shop. I no longer have the packaging, but I presume it's IPS?
@captain spaulding said:
I just tried on my Knipex Alligator 7-1/4-inch (the smallest Alligator pliers in the set) and they fit a 91mm SAK in between the handles. You have to just slightly open them to get it to fit in. Pics later.Sorry for not making it too clear, but maybe the following pictures will do a better job describing what I look for:

Could any owners of Knipex please kindly confirm which wrench/pliers wrench could nest which size of SAK?(just as the pix shown above?)
ah! Now that I see what you mean by nest, I would have agree the 7 1/4 Alligator or Cobra pliers.
In my opinion the Alligator (I prefer them over the cobra to get into the tightest of places) is a tool everyone (who has ever needed to use a pair of pliers) needs to have! Once you get it and use it for a while the next logical progression is the pliers wrench.
Basically if you use a crescent wrench a lot, get the pliers wrench. If you often use a pair of pliers, channel locks more get the Cobra or Alligator. Far superior to Channel Lock type. Do NOT fall for the Irwin clone though, they are complete rubbish compared to Knipex.
I firmly believe you could dismantle a small brick building using nothing but a pair of their 12" pair of Alligator pliers & linesman pliers [emoji23]
Thanks for the input, I will for sure look them up, good to know!
-
Ok here is my 2. Both used daily and barely any sign of wear.
-
@captain spaulding said:
I wish you guys would be more clear, the Knipex plier wrench is good?
Thinking of adding a small one to my EDC backpack.
Yes, very good if you want a smooth gripping area. Its sort of like a crescent wrench, but easily adjustable and has two handles which can be used like pliers.
If you want something to grip anything get the Cobra Plier.
Looks like the only real solution is to buy both.
That's not even close to a solution
Next you have to decide which size of each tool, and there doesn't appear to be a wire cutting notch on either, so that means you'll need something else too....;)
-
@50ft-trad said:
@captain spaulding said:
I wish you guys would be more clear, the Knipex plier wrench is good?
Thinking of adding a small one to my EDC backpack.
Yes, very good if you want a smooth gripping area. Its sort of like a crescent wrench, but easily adjustable and has two handles which can be used like pliers.
If you want something to grip anything get the Cobra Plier.
Looks like the only real solution is to buy both.
That's not even close to a solution
Next you have to decide which size of each tool, and there doesn't appear to be a wire cutting notch on either, so that means you'll need something else too....;)
I would say the Knipex cutters like in my first pic would be great.
-
Cap----> How do you like the sub 8' combo pliers in your first post with all the pictures?
-
@ToolJoe said:
Cap----> How do you like the sub 8' combo pliers in your first post with all the pictures?Do you mean the first picture all the way to the top right.
These?

If so I have not even used them once yet. I just recieved them. There was a discussion about something you may want to read if you are looking into a pair.
</post/1178972>
-
I forgot to add this video to the thread. If you do not know the Alligator and Cobra pliers are "self locking", but have no locking mechanism. Watch the video if you want a explanation.
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
I always like to get one but never get around to...my question to our Knipex owners--which one of them could nest well with a standard 91/93mm SAK? Also will any of the Pliers wrench nest well with a SAK? They look super nice!
Comis, depending on your needs it sounds like you are in the market for either the 5" Pliers Wrench or 5" Cobra pliers both considered their "mini tools", however if you don't mind the size increase the 7 1/4 alligator pliers is a most versatile tool as well or the 6" pliers wrench. The larger sizes are a bit cheaper, you can pick up the 7 1/4 alligator pliers for about $22 often whereas the minis approach $50.
Welcome to the MT.O, and please do enjoy your stay!
Thanks for the reply, I just wonder what you have mentioned could 'nest' well with 91mm SAK?
@captain spaulding said:
...As far as pairing it with a SAK I am not sure what you are asking.
I mean it is definitely a great tool to have paired with a SAK if you need such a tool.Not sure if this will help you get a answer, but I was thinking of getting the smallest version and keeping it in my backpack with a SAK and folder.
Sorry for not making it too clear, but maybe the following pictures will do a better job describing what I look for:

Could any owners of Knipex please kindly confirm which wrench/pliers wrench could nest which size of SAK?(just as the pix shown above?)
Pics you requested. The SAK is a 91mm Camper.
With the combination pliers it fits decently. The handles must be opened a bit.
<a href="http://s927.photobucket.com/user/ChadV_2010/media/Tools/DSC05040_zpswnmi82yt.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Tools/DSC05040_zpswnmi82yt.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
With the 7'' Alligator pliers it fit well and the handles only had to be very slightly opened.
<a href="http://s927.photobucket.com/user/ChadV_2010/media/Tools/DSC05039_zpsvxpeghur.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Tools/DSC05039_zpsvxpeghur.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
With the 10" it fit with no handle opening needed.
<a href="http://s927.photobucket.com/user/ChadV_2010/media/Tools/DSC05041_zps8tlpmdas.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Tools/DSC05041_zps8tlpmdas.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Thanks Capt'n! That's really helpful.

-
Glad to help!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login