Unusual SAKs
-
Here's an interesting knife, a Victorinox Timber Scribe or Race Knife. Has a U-shaped blade that cuts grooves in wood. Used for marking lumber, and wooden crates and barrels.
So that's what that tool is! I recently ran across this model here (not my knife or picture). Not sure what the model number is as I couldn't find it in any old catalogs. The can opener and saw indicate that it was either made or (more likely iMO) repaired after the mid 1960s, but what really caught my eye was the timber scribe on the tail pin.

It also reminds me of a hoof cleaning knife for horses hooves.
-
Those are not the same tools. The first is for timber scribe, the other one for hoof cleaning. The timber scribe tool is only sharp at the front, the hoof cleaner is sharp the whole length. Its not only made for cleaning, but also for cutting the horn away.
I think the knife you show jazzbass was made by röthlisberger at bärau, there
s a link http://www.messer-knife.ch He is still producing some farmer knives and also some firesteel knives. Im not sure if he`s using some blades from victorinox directly. Some tools look almost identical, but have some little changes. -
Now we're getting really unusual !! :o
Thanks for all the post guys

Lovin it - But do I try and get one of these models with the*** really*** unusual tools ??
-
@ulli said:
Those are not the same tools. The first is for timber scribe, the other one for hoof cleaning. The timber scribe tool is only sharp at the front, the hoof cleaner is sharp the whole length. Its not only made for cleaning, but also for cutting the horn away.I think the knife you show jazzbass was made by röthlisberger at bärau, there
s a link http://www.messer-knife.ch He is still producing some farmer knives and also some firesteel knives. Im not sure if he`s using some blades from victorinox directly. Some tools look almost identical, but have some little changes.Good info, ulli, thanks! I don't know too much about the the bauermesser line of knives, but I really like them for their unusual tool sets. I resist collecting them because they don't seem to have ever been officially imported into the US, so I'd have to spend a lot of time and money getting them from Europe.
Looking at the messer-knife.ch, I think you're right about where it comes from. The auction I took that picture from didn't have any good shots of the tang stamps on that knife so I couldn't tell if it was an Elsener/Victoria/Victorinox blade or not.
-
I think I watched the same auction. Maybe there wasn`t any tang stamp at all. The main difference between this knife and a victorinox are the bolsters. The bolster at this knife is made of brass i think, and the bolsters from victorinox are made of nickel-silver I would say. The colour is much different. Another difference is the sacking needle.
Bauernmesser in good shape are also quite difficult to find here. Once there were maybe over 70 different swiss knife makers producing bauernmesser.
-
Stepping out of my comfort zone of Officer's Knives for a minute, so please excuse any errors or misinformation. Hopefully ulli or jaydar will correct any mistakes I make here.

I debated where to put this knife - there are a couple of Accountant/Student Knife threads here and this knife is a natural fit for those. But I think this thread is a good place because by all accounts this one is pretty unusual. This is - I think - a Model 54/2 P from the mid 1950s. It's 75mm with MOP scales. Pretty unusual for these knives as far as I've seen, this model has a nail file instead of a pen blade, much like a modern Sportsman or Cadet. After I picked this one up I looked back through my auction data - this is the only accountant-style knife I could find with the short nail file.
Looking at account-style knives, Victorinox made them in 4 sizes:

As I understand it, the sizes are:
Model 600/610: 62mm
Model 4x: 68.5mm
Model 5x: 75mm
Model 7x: 84mmIf this is correct, this is a Model 54/2. The standard pen blade model would simply be a Model 54, and the "/2" refers to the presence of the short nail file. The letters after the model number refer to the scale material - "H" for horn, "P" for mother-of-pearl. Here you can see the regular and "/2" versions side by side:

-
Nice find!

-
Whow, really cool knife! Never seen this one before, only in the catalog. I think you`re right with the numbers.
I have just a Number 50/2 H. Also not really common. And another one with the nailfile, but 84 mm advertising alox. I don`t know the Name or number of it.
-
JB
I really like the 54 H, that clip point blade carbon steel? Badass great patina
-
Now that I look at it, maybe its a spear point? The secondary blade
-
@PileDriver02128 said:
I really like the 54 H, that clip point blade carbon steel? Badass great patinaNo, it's stainless. It does look like carbon in the picture, though. I think it caught a weird reflection from the lightbox.
-
A trio of interesting 84mms. The horn one at the top may be a 75 a H (not sure if the 'a' refers to t&t). The stainless one may be a 74 x.
-
I love the information that comes out in this thread. Keep 'em coming chaps.

-
Here's an interesting one I picked up a couple years ago from a forum member here. It's a Yeoman with a pen blade instead of a combo tool - I call it a Yeoman II is keeping with Victorinox naming traditions. Looking at the tools I'd estimate that this knife was made sometime in the early 90s, so let's say 1992 give or take a year or so.
I've never heard anyone talk about this variation before, and I've never seen another one anywhere - not on eBay, in another collection, etc. In fact, when I got this knife I thought that there was a good chance that it was a mod so I pulled the sales to check out the rivets. Sure enough they are factory peened, so this came from Ibach like this. Why the pen blade instead of the combo tool? I have two hypotheses:
-
It's a mistake. Someone grabbed a pen blade instead of combo tool, stuck it in and assembled it. Imagine assembling Explorers all day, then switching to Yeomans - pretty easy mistake to make. And since the pen blade does technically belong in that location, it fit fine and worked correctly and so it passed through QC. It came in a box that was stamped with the standard (combo tool) Yeoman part number and name, so this is IMO the most likely scenario.
-
This is a prototype for the new Yeoman knife that accidentally (or not accidentally) got sold. Most Yeomans (> 90% or so) were made in the mid 1990s - say circa 1994 - and have riveted scissors. This knife has the earlier scissors with a screw, implying that it was made earlier. Maybe they were curious what it's be like vs the combo tool version. This scenario is less like IMO, but still possible.
Whatever the case, here it is - the Yeoman II. Enjoy.

-
-
That's an odd one, reminds me of the 84mm Gourmet with CS but no other openers or the 84mm Electrician with Phillips driver but no other drivers. Not too versatile, but very cool! :)
I agree with assembly mistake, just too weird, good find JB!

-
I love the information that comes out in this thread. Keep 'em coming chaps.

+1 ;)
+2
-
That truely is a unique knife.
I wonder what other hyrbids are floating around unseen.
-

Keychain size, at least a bit different design (nail clippers).
-
Early 111mm Outrider, no small phillips and screw joint scissors. What I think is unusual about this one is the green scales, all the other early 111's I have seen were either red or black except the Hunter, and that was with a deer imprint. Tang has vssr stamp with "patented" opposite.



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login