Swiza D04 - thoughts after 10 days of use
-
I somehow get the feeling the D01/02 was the knife they really designed, and then they started adding tools. Also, there is something a little “off” with how the tools are shaped, there no small details or acute angles. I guess it's a consequence of their manufacturing process.
Perhaps the designer team were stereotypical Francophones who do not drink beer. :D
-
Last Friday afternoon, I sent pictures of mine to Swiza to inquire about warranty (I don't have the receipt anymore). Anyway, got a mail today, that I can send mine in and they will replace it. So far the warranty gets a thumb up from me

I also have a broken computer case I used for the following test.
When you tighten the screws hard the thread gets destroyed and the screw will turn freely. It takes some force but not that much and can easily be achieved with the large flat in straight position (no need to go to 90° for extra torque).
Anyway, both large flat on the Pioneer and on the Swiza destroyed the screw without any harm to either tool. So, the only tool I really like on the Swiza still holds his ground.I then repeated the test with the small flat.
Needless to say, the screws were of cheap quality and suffered a bit too ;)
No sign of wear on the Pioneer, but the Swizas small flat is gone. It has both a chip and is deformed.


-
Sending it in because of the bent drivers, or something else?
-
@50ft-trad said:
Sending it in because of the bent drivers, or something else?Dent in the scales (it is supposed to be dish-washer safe), abraded small flat and Phillips. They want to analyze the damage, it sounded like the are eager to improve their product, so that is good.
-
@50ft-trad said:
Sending it in because of the bent drivers, or something else?
Dent in the scales (it is supposed to be dish-washer safe), abraded small flat and Phillips. They want to analyze the damage, it sounded like the are eager to improve their product, so that is good.
That sounds promising.
If they stand by their tools and warranty and improve the next generations, the Swizas can become very good tools.
-
Testing Spring strength (semi-scientific)
Materials
One cheap analog kitchen scale rated up to 3kgMethod
Holding the tool horizontally, I pressed the scale down with the tip of the implement, reading out what the highest pressure is that can be achieved. Readout was pretty easy and probably precise to 10/20g. Technically, that won't measure spring strength but spring strength in proportion to tool length (that is also what we are interested in). Measure was repeated several times to get a more representative result (slipping of was quite common :P)
As I personally feel that gramm values are of no interest here I decided to normalize the result, setting the value I got for the Pioneer cap-lifter (1200 g) to 1.Result
Tool
Comment
0.54
D04
Phillips
**
0.58
Swiza
Can opener
**
0.63
CT29
Cork-screw
**
0.63
CT29
Can opener
**
1.00
Pioneer
Can opener / Cap lifter
Unsurprisingly can opener and cap lifter on the Pioneer got the same rating
1.17
CT29
Bit-Holder
Despite its length it has very good retention
1.21
D04
Cap lifter
Yay, in the category Swiza Tools the large flat remains champion
1.29
CT29
Cap lifter
**
Discussion
We can easy see that the can-opener on the Swiza has a much weaker retention than the can-opener on the Pioneer. It is however only a slight difference to the can-opener on the CT. Personally, I would have thought the difference can-opener Swiza vs. CT would be larger. This makes me believe that to some parts the geometry of the tool works against the Swiza at least for me (I'm a lot more comfortable with the CT's can-opener when using it as a screw-driver). It is well possible that others will have less of a problem.Conclusion
I still think it was an oversight to make the back-spring on the can-opener this weak but the perceived weakness is at least partially individual (how well you cope with the Swizas curved design I presume). -
@50ft-trad said:
Sending it in because of the bent drivers, or something else?
Dent in the scales (it is supposed to be dish-washer safe), abraded small flat and Phillips. They want to analyze the damage, it sounded like the are eager to improve their product, so that is good.
That sounds promising.
If they stand by their tools and warranty and improve the next generations, the Swizas can become very good tools.
Well, there are two kinds of issues (for me).
Tool quality: I'm really disappointed in the small flat, that should be rather easy remedied.
Ergonomics: The curved frame / sticking out tools were purposefully designed like this to easy open the tools. However, it makes it uncomfortable to grip the tool. I don't think this can be solved without re-designing / re-thinking the frame. -
@50ft-trad said:
Sending it in because of the bent drivers, or something else?
Dent in the scales (it is supposed to be dish-washer safe), abraded small flat and Phillips. They want to analyze the damage, it sounded like the are eager to improve their product, so that is good.
That sounds promising.
If they stand by their tools and warranty and improve the next generations, the Swizas can become very good tools.
Well, there are two kinds of issues (for me).
Tool quality: I'm really disappointed in the small flat, that should be rather easy remedied.
Ergonomics: The curved frame / sticking out tools were purposefully designed like this to easy open the tools. However, it makes it uncomfortable to grip the tool. I don't think this can be solved without re-designing / re-thinking the frame.I see that. If I where them, I think I would have redesigned the frame and tools to increase comfort on the 2+ layer tools.
-
there is a hole/gap in the spring for the can opener. What do you
mean any chance to use this (keyring or anything else)?Hi, I just received my D04 and I'm curious about this hole/gap as well. Anyone knows what it is for? I'm kinda hoping that it is for the option of adding on a keyring
-
Hi,
there is a hole/gap in the spring for the can opener. What do you
mean any chance to use this (keyring or anything else)?Hi, I just received my D04 and I'm curious about this hole/gap as well. Anyone knows what it is for? I'm kinda hoping that it is for the option of adding on a keyring
It looks too much like a hidden feature to me so I doubt that's the case.
Maybe it was meant for toothpick storage :D
-
Hi,
there is a hole/gap in the spring for the can opener. What do you
mean any chance to use this (keyring or anything else)?Hi, I just received my D04 and I'm curious about this hole/gap as well. Anyone knows what it is for? I'm kinda hoping that it is for the option of adding on a keyring
It looks too much like a hidden feature to me so I doubt that's the case.
Maybe it was meant for toothpick storage :D
If that is the case I may have to consider one of these as well, but not until they add decent scissors.
BTW, Swiza, if you are reading this (I sure hope so) I want Wenger Ranger style scissors, or at least Wenger 85mm style. Please dont do the easily broken Vic sytle spring.
Sincerely,
sLaughterMed -
Hi,
there is a hole/gap in the spring for the can opener. What do you
mean any chance to use this (keyring or anything else)?Hi, I just received my D04 and I'm curious about this hole/gap as well. Anyone knows what it is for? I'm kinda hoping that it is for the option of adding on a keyring
It looks too much like a hidden feature to me so I doubt that's the case.
Maybe it was meant for toothpick storage :D
If that is the case I may have to consider one of these as well, but not until they add decent scissors.
BTW, Swiza, if you are reading this (I sure hope so) I want Wenger Ranger style scissors, or at least Wenger 85mm style. Please dont do the easily broken Vic sytle spring.
Sincerely,
sLaughterMedThose Wenger back spring scissors may be a patented item belonging to Vic (since they are still on the Delemont Line).
-
[quote author=Storky link=topic=62906.msg1178206#msg1178206 date=1446797703]
Hi,there is a hole/gap in the spring for the can opener. What do you
mean any chance to use this (keyring or anything else)?Hi, I just received my D04 and I'm curious about this hole/gap as well. Anyone knows what it is for? I'm kinda hoping that it is for the option of adding on a keyring
It looks too much like a hidden feature to me so I doubt that's the case.
Maybe it was meant for toothpick storage :D
If that is the case I may have to consider one of these as well, but not until they add decent scissors.
BTW, Swiza, if you are reading this (I sure hope so) I want Wenger Ranger style scissors, or at least Wenger 85mm style. Please dont do the easily broken Vic sytle spring.
Sincerely,
sLaughterMedThose Wenger back spring scissors may be a patented item belonging to Vic (since they are still on the Delemont Line).
[/quote]
Patent laws are tricky. It would be Swiss patent law in this case? Is theirs a "use it or lose it" type deal, or is it more like in the US, where it becomes public domain after 20 some years from filing? -
[quote author=red_rider_1979 link=topic=62906.msg1193993#msg1193993 date=1449565580]
[quote author=Storky link=topic=62906.msg1178206#msg1178206 date=1446797703]
Hi,there is a hole/gap in the spring for the can opener. What do you
mean any chance to use this (keyring or anything else)?Hi, I just received my D04 and I'm curious about this hole/gap as well. Anyone knows what it is for? I'm kinda hoping that it is for the option of adding on a keyring
It looks too much like a hidden feature to me so I doubt that's the case.
Maybe it was meant for toothpick storage :D
If that is the case I may have to consider one of these as well, but not until they add decent scissors.
BTW, Swiza, if you are reading this (I sure hope so) I want Wenger Ranger style scissors, or at least Wenger 85mm style. Please dont do the easily broken Vic sytle spring.
Sincerely,
sLaughterMedThose Wenger back spring scissors may be a patented item belonging to Vic (since they are still on the Delemont Line).
[/quote]
Patent laws are tricky. It would be Swiss patent law in this case? Is theirs a "use it or lose it" type deal, or is it more like in the US, where it becomes public domain after 20 some years from filing?
[/quote]Maybe one of our Swiss members can answer that but since Vic is using both those scissor types in current models, they probably own the patent. :tu:
-
I'm not Swiss, but I can use DuckDuckGo:
From the website of Swiss Federal Institute of Intellectual Property:
Owning a patent gives you the exclusive right to prevent others from commercially using your invention for up to 20 years. During this period you can prohibit others from using it - i.e., producing, using, selling or importing - without your permission.
I think these things are pretty much standardized through international treaties for most of the OECD.
-
@Steinar said:
I'm not Swiss, but I can use DuckDuckGo:From the website of Swiss Federal Institute of Intellectual Property:
Owning a patent gives you the exclusive right to prevent others from commercially using your invention for up to 20 years. During this period you can prohibit others from using it - i.e., producing, using, selling or importing - without your permission.
I think these things are pretty much standardized through international treaties for most of the OECD.
Thank you Steinar!!!

-
@Steinar said:
I'm not Swiss, but I can use DuckDuckGo:From the website of Swiss Federal Institute of Intellectual Property:
Owning a patent gives you the exclusive right to prevent others from commercially using your invention for up to 20 years. During this period you can prohibit others from using it - i.e., producing, using, selling or importing - without your permission.
I think these things are pretty much standardized through international treaties for most of the OECD.
Well if thats the case, the small wenger scissors are up for grabs (inrroduced in 1972 according to SAK wiki) not sure on the large ones, but its pretty close to being up soon as the original ranger series was introduced in the 90's. Make it happen Swiza!
-
Hi,
there is a hole/gap in the spring for the can opener. What do you
mean any chance to use this (keyring or anything else)?Hi, I just received my D04 and I'm curious about this hole/gap as well. Anyone knows what it is for? I'm kinda hoping that it is for the option of adding on a keyring
It looks too much like a hidden feature to me so I doubt that's the case.
Maybe it was meant for toothpick storage :D
If that is the case I may have to consider one of these as well, but not until they add decent scissors.
BTW, Swiza, if you are reading this (I sure hope so) I want Wenger Ranger style scissors, or at least Wenger 85mm style. Please dont do the easily broken Vic sytle spring.
Sincerely,
sLaughterMedScissors a must. Don't care which sty;e, but, if Wenger style: smooth not serrated and no bounce up and down.
-
I shouldn't think there'd be too much problem modelling scissors on the Wenger style, after all, the Leatherman Juice scissors have used essentially the same approach
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login