Tri-Flow
-
Tri-Flow sounds like Break-Free CLP: solvent + oil + suspended teflon particles. I emailed Tri-Flow and asked about the silicone. If they answer, I'll report back. I doubt that it contains silicone, but whatevs. Makes no difference to me. [I use straight silicone spray on door locks, vehicle weather stripping, etc.]
I put a screw or nut in the bottom of my Break-Free pump bottle to help agitate the teflon before usage. It settles at the bottom.
Thanks for the heads-up on this. I'm going to order some. I hoard lubes (just like I hoard MTs, SAKs, knives, guns and Maxpedition bags) and am looking forward to trying it.
-
@powernoodle said:
Tri-Flow sounds like Break-Free CLP: solvent + oil + suspended teflon particles. I emailed Tri-Flow and asked about the silicone. If they answer, I'll report back. I doubt that it contains silicone, but whatevs. Makes no difference to me. [I use straight silicone spray on door locks, vehicle weather stripping, etc.]I put a screw or nut in the bottom of my Break-Free pump bottle to help agitate the teflon before usage. It settles at the bottom.
Thanks for the heads-up on this. I'm going to order some. I hoard lubes (just like I hoard MTs, SAKs, knives, guns and Maxpedition bags) and am looking forward to trying it.
Great to see all the positive responses!
I'm going to order a case for myself personally and soak my handguns in this stuff. Especially since it is cheaper than CLP. -
Haven't tried it myself yet, but I have read good reviews of it on few bicycle forums. It seems to be truly an universal lubricant...

-
From my new girlfriend Calli at Tri Flow: "This is PTFE (teflon) based and contains no silicone."
-
@powernoodle said:
I hoard lubes...TMI bro, TMI
-
Nothing on their website describing silicon ball bearings , I think the tech might be pulling your leg or making stuff up ;)
I'll have to ask him where he got his info. Stuff works though. I like it more than WD40 at this point.
Remember: WD-40 is not a lubricant. It's a water dispersant. That's why it works well if you get moisture under a distributor cap. It has only a small amount of oil as a carrier.
-
Looks like I'll be adding a can as well. Thanks for the heads up Camp.
-
@Mr. Whippy said:
WD-40 is not a lubricant.Here's my take on that hot topic :). According to the MSDS, WD-40 contains "Petroleum Base Oil" of up to 25% by weight - which is generally believed to be mineral oil - and petroleum oil is without question a lubricant. The manufacturer also claims that WD-40 "lubricates". This claim, by itself, does not prove that WD-40 is a lubricant, but I would contend that the manufacturer's assertion has a presumption of verity. And then there is the practical test of spraying WD-40 on a clean, dry, squeaky hinge. But the MDSD, taken alone, is proof enough of WD-40's lubricity - especially after the solvent and propellant components (both being highly volatile) quickly dissipate. What's left is - more or less - Johnson's Baby Oil (100% mineral oil), though without the baby b*tt smell.
I would concur with your Lordship that WD-40's primary application is water displacement.

Running for cover!

-
Tri-Flow is great. Use it on bike components frequently, it'll get a trashed chain back into functional shape without too much work. And it does function similarly to Break-Free as I use them sort of interchangeably. The only thing though, like all lubes of this sort, it will attract and hold dirt and dust. This is more of a concern with bikes than with multis, but still worth noting.
-
@Mr. Whippy said:
WD-40 is not a lubricant.Here's my take on that hot topic :). According to the MSDS, WD-40 contains "Petroleum Base Oil" of up to 25% by weight - which is generally believed to be mineral oil - and petroleum oil is without question a lubricant. The manufacturer also claims that WD-40 "lubricates". This claim, by itself, does not prove that WD-40 is a lubricant, but I would contend that the manufacturer's assertion has a presumption of verity. And then there is the practical test of spraying WD-40 on a clean, dry, squeaky hinge. But the MDSD, taken alone, is proof enough of WD-40's lubricity - especially after the solvent and propellant components (both being highly volatile) quickly dissipate. What's left is - more or less - Johnson's Baby Oil (100% mineral oil), though without the baby b*tt smell.
I would concur with your Lordship that WD-40's primary application is water displacement.

Running for cover!

All true, but its lubricant properties are fairly weak (I mean really, in machinist's shops, they use water as "coolant and lubricant" sometimes, but it doesn't mean it's great at it) and there are far better lightweight lubricants--some even dry coat lubricants for dusty settings. So yes, there is some lubricity with WD-40, but really it's better for water dispersant/rust preventative.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login