Kampfer's Mini Surge (By Breezy12)
-
@Kampfer said:
Returning from Pacific Northwest with Mini-Surge, I'd share with you some memorable moments with you.First, Mini-Surge went meet its crafter: Breezy12
Then it went visit its birth place: Leatherman Tool Group
Staff at Leatherman really liked Mini-Surge, they think it is very thoughtful and well crafted, as they seen many failed attempts return to warranty department, and stated Mini-Surge would still be cover by their 25-years warranty. However they were little puzzled why I choose Wave platform for such mod instead of Charge.
Third, in Leatherma's retail store, Mini-Surge met the Signal for the first time. And of course it picked up many souvenirs
thanks for showing off the Mini Surge, Kampfer! really glad to hear that the LM staff liked the work. :D
-
@Kampfer said:
Staff at Leatherman really liked Mini-Surge, they think it is very thoughtful and well crafted, as they seen many failed attempts return to warranty department, and stated Mini-Surge would still be cover by their 25-years warranty. However they were little puzzled why I choose Wave platform for such mod instead of Charge.Any expansion on this? Very positive news for modding.
-
I was told if it says Leatherman on it, it is covered; they replaced tools been burned to ash, shot to pieces, rust from being at bottom of lake for years, etc.
Also they told me they have plenty of spare parts for retired tools; when a retired tool is unfixable, the warranty department would harvest parts from it before the rest send to scrap, parts would be refurbish and put in inventory.
-
So aslong as genuine leatherman parts are used anything goes! That is awesome news, it also probably puts me towards wingman scissors rather than SAK on my plan. I'd assumed I wouldn't have warranty before.
-
When my prybar (large screwdriver) broke on my wave a few months ago, I emailed them about the mods I did and they said that normally it would not be covered because I removed the screws, but told me they would honor the warranty as a one-time thing. I guess they changed their attitude in the past few months, because they weren't very happy with me before. It also states in their warranty that alteration would void it, so I wonder if it depends on who you're talking to.
-
Looks like you had a great trip. My daughter lives in Seattle I hope to stop a to Leatherman when I go to visit her. I am about to start making my own Mini Surge I have Wave, Rebar and Wingman ready to go.
Sent from my iPad using Tapatalk
-
@masterjuggler said:
When my prybar (large screwdriver) broke on my wave a few months ago, I emailed them about the mods I did and they said that normally it would not be covered because I removed the screws, but told me they would honor the warranty as a one-time thing. I guess they changed their attitude in the past few months, because they weren't very happy with me before. It also states in their warranty that alteration would void it, so I wonder if it depends on who you're talking to.Don't hold me responsible on those statements, I was just told such.
I feel it will be all depends on who you ask, when you ask and what you ask. -
Hello everybody!
Lost my more than 20 year old Supertool last month. :-((
So looking for some information about the Leatherman WAVE I found this post, and I love it! I would like to buy me a WAVE and at least change the WAVE´s wood/metal file to the SURGE´s T-shaft holder. Anybody here who can tell me if this is possible?Thank you and best regards from Germany,
Armin -
@armab said:
Hello everybody!
Lost my more than 20 year old Supertool last month. :-((
So looking for some information about the Leatherman WAVE I found this post, and I love it! I would like to buy me a WAVE and at least change the WAVE´s wood/metal file to the SURGE´s T-shaft holder. Anybody here who can tell me if this is possible?Thank you and best regards from Germany,
ArminFirst welcome to the forum

I don't believe they are compatible, I think the pivot size is bigger on the Surge but I could be wrong.
If you want to replace your Supertool there are plenty on E-bay. -
@armab said:
Hello everybody!
Lost my more than 20 year old Supertool last month. :-((
So looking for some information about the Leatherman WAVE I found this post, and I love it! I would like to buy me a WAVE and at least change the WAVE´s wood/metal file to the SURGE´s T-shaft holder. Anybody here who can tell me if this is possible?Thank you and best regards from Germany,
ArminWelcome to MTO.
Never seen a t shank holder on a wave, so I am guessing it would be very hard or impossible. That is just a guess though.
-
Hello everybody!
Lost my more than 20 year old Supertool last month. :-((
So looking for some information about the Leatherman WAVE I found this post, and I love it! I would like to buy me a WAVE and at least change the WAVE´s wood/metal file to the SURGE´s T-shaft holder. Anybody here who can tell me if this is possible?Thank you and best regards from Germany,
ArminWelcome to MTO.
Never seen a t shank holder on a wave, so I am guessing it would be very hard or impossible. That is just a guess though.
I think Metro put one on a Charge a while back, but it required milling down both the scale in the Charge, and the T-shank holder. Requires some pretty expensive equipment to do properly at home.
-
Thank you for your Infos!
I like the possibility to use the LM with a metal saw. Something that is very useful driving a 50 year old car ;-) So I just ordered the Surge version with the two bit-holder...
Regards from sunny Germany
Armin -
@Kampfer said:
Staff at Leatherman really liked Mini-Surge, they think it is very thoughtful and well crafted, as they seen many failed attempts return to warranty department, and stated Mini-Surge would still be cover by their 25-years warranty. However they were little puzzled why I choose Wave platform for such mod instead of Charge.Thanks for the inspiration of putting a nice and well thought out pocket tool together. Now that Leatherman has given you the blessing to modify and still able to supply the warranty, I am interested in jumping on the band wagon. Will start gathering parts and go for it.
The charge scales will be inherently different look from the surge. I think your wave mod is perfect choice. Thanks for sharing.
been a long time Surge user...
:ahhh

-
quoting from the leatherman's website... Hehe..
We take extraordinary measures to make sure your Leatherman product will give you many years of dependable service. If it doesn't the product has a defect in material or workmanship, don’t worry! We will gladly repair or replace it, at our discretion, with one of equal or greater value under our 25-year guarantee for knives and tools and 10-year guarantee for Leatherman branded lights.
This warranty covers only the original/primary owner and does not cover abuse, alteration, theft, loss, or unauthorized and/or unreasonable use of your Leatherman product. This warranty does not cover sheaths, accessories, imprinting, color finishes, cleaning, or sharpening.
Our warranty program covers tools purchased for personal use only. This warranty does not cover bulk purchases from auctions or flea markets with the intent to resell repaired or refurbished tools.
Leatherman Tool Group is not liable for incidental or consequential damages. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from jurisdiction to jurisdiction.
-
Yeah, I wouldnt count on Leatherman honoring the warranty on a modded tool like the Mini Surge, regardless of what the employees say.
-
@sLaughterMed said:
Yeah, I wouldnt count on Leatherman honoring the warranty on a modded tool like the Mini Surge, regardless of what the employees say.Agree, if one have the skill to mod such tool, he should be able to fix it when some parts of said tool is broken.
-
Nonethless, the inevitable ball is rolling, waiting for all the goodies to arrive.
-
Hmm this got me thinking you should do up another Mini Surge in BO.
The S30 blade, scissors and gut hook blade in BO will be extremely hard to hunt down as donors... :'(
It was mentioned about MTOers sending tools out to be BO treated... Anyone had tools dismantled and sent out for powder coating??? I think this would be awesome, just wonder if it would cause clearance issues....
-
Never mind...
did a search an found some posts.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login