No new Leathermans in 2016?
-
Or I will break the knife off for you, easy!

-
Just use a vise. ;)
-
::)
Nice loadout Obi. Around the time I was thinking of modding my Rebar to knifeless, the Knifeless Rebar/Skeletool RX thread appeared. So, that plan is on hold, until I find out what LM is putting out at SHOT.
And Obi, that Rebar looks great. I think id switch out the small bit driver for another flathead though. Then I can keep one of the more exotic bits in it, and carry that one in my pocket.
-
@50ft-trad said:
Based on my experenice with Mini-Surge and Wave, i have say i like Wave's pilers head more, maybe because i dont cut enough hard wire to wear out the Wave head.
Quick question Kam, does switching the plier heads alter handle splay, or are they the same?
Exactly the same, sir.
Thanks for the clarification
nice to know that if any future offerings have excessive splay and bear the same head, that the issue is in the handles rather than the head itself 
-
Given all the complaining and raging over LM's recent offerings,maybe we should be happy there no 2016 releases?
-
@kirk13 said:
Given all the complaining and raging over LM's recent offerings,maybe we should be happy there no 2016 releases?That was pretty much my first response in this thread :D
I want them to spend a little more time thinking before they make their next move. I think they need to put more thought into ergonomics and usage, rather than what I perceive as being just looking for the next marketing angle.
-
@50ft-trad said:
Given all the complaining and raging over LM's recent offerings,maybe we should be happy there no 2016 releases?
That was pretty much my first response in this thread :D
I want them to spend a little more time thinking before they make their next move. I think they need to put more thought into ergonomics and usage, rather than what I perceive as being just looking for the next marketing angle.
Oh Al,your such a romantic :D
-
Always!

-
I don't have much time for leatherman these days (victorinox too)
I'm pretty disgusted that they've never released a blunt nose tool - instead they constantly market their silly gadget ideas using unrealistic scenarios down our throats.Same goes for victorinox, they bore the pants off me too these days. Not even a whiff of originality to be seen anywhere in the past decade, just a never ending stream of banal configurations and who now seem to be fixated on relaunching their Wenger-clone franchise.....dull....dull....dull
SOG and Gerber should seriously consider marketing a new concept that's well thought out and more importantly well made. The MT & SAK market is so stagnant at the moment. But that's possibly because of restrictive held patents.
-
@tosh said:
I don't have much time for leatherman these days (victorinox too)
I'm pretty disgusted that they've never released a blunt nose tool - instead they constantly market their silly gadget ideas using unrealistic scenarios down our throats.Same goes for victorinox, they bore the pants off me too these days. Not even a whiff of originality to be seen anywhere in the past decade, just a never ending stream of banal configurations and who now seem to be fixated on relaunching their Wenger-clone franchise.....dull....dull....dull
SOG and Gerber should seriously consider marketing a new concept that's well thought out and more importantly well made. The MT & SAK market is so stagnant at the moment. But that's possibly because of restrictive held patents.
Two things Vic should do that would destroy the competition: a deluxe explorer (explorer with pliers) and offer custom load out saks. [emoji2]
-
I don't have much time for leatherman these days (victorinox too)
I'm pretty disgusted that they've never released a blunt nose tool - instead they constantly market their silly gadget ideas using unrealistic scenarios down our throats.Same goes for victorinox, they bore the pants off me too these days. Not even a whiff of originality to be seen anywhere in the past decade, just a never ending stream of banal configurations and who now seem to be fixated on relaunching their Wenger-clone franchise.....dull....dull....dull
SOG and Gerber should seriously consider marketing a new concept that's well thought out and more importantly well made. The MT & SAK market is so stagnant at the moment. But that's possibly because of restrictive held patents.
Two things Vic should do that would destroy the competition: a deluxe explorer (explorer with pliers) and offer custom load out saks. [emoji2]
Competition??

What competition?? They have no competition, they've removed their sole competitor, which explains perfectly why they are soooooooo DULL!!!......yawn!
-
I would like to see some OHT variants. I would love to get my hands on an OHT, but I just can't see a need for 3 cutting implements (two knives AND a strap cutter) and one of them is not scissors. Combine the SE and strap cutter! At most, I want ONE knife on a MT. Replace the SE and Strap cutter with some scissors and... I dunno, something else. General purpose OHT would be great.
-
I don't have much time for leatherman these days (victorinox too)
I'm pretty disgusted that they've never released a blunt nose tool - instead they constantly market their silly gadget ideas using unrealistic scenarios down our throats.Same goes for victorinox, they bore the pants off me too these days. Not even a whiff of originality to be seen anywhere in the past decade, just a never ending stream of banal configurations and who now seem to be fixated on relaunching their Wenger-clone franchise.....dull....dull....dull
SOG and Gerber should seriously consider marketing a new concept that's well thought out and more importantly well made. The MT & SAK market is so stagnant at the moment. But that's possibly because of restrictive held patents.
Two things Vic should do that would destroy the competition: a deluxe explorer (explorer with pliers) and offer custom load out saks. [emoji2]
Custom loadout SAKS would be amazing!

-
Custom loadout SAKs would be
amazingunaffordable!!
Seriously, the labour costs would be mind-boggling.But I think victorinox and leatherman and all others should open up to us the buyers and listen to what we want.
How hard would it be to create design software where we the buyers could interact. If one particular configuration was repeated say 500 times it should be put forward for future releases.
As it is, they all play the same game...."take it or leave it" seems to be their motto these days!

-
@tosh said:
Custom loadout SAKs would beamazingunaffordable!!
Seriously, the labour costs would be mind-boggling.But I think victorinox and leatherman and all others should open up to us the buyers and listen to what we want.
How hard would it be to create design software where we the buyers could interact. If one particular configuration was repeated say 500 times it should be put forward for future releases.
As it is, they all play the same game...."take it or leave it" seems to be their motto these days!

I think Leatherman should adapt their Wingman/Sidekick/Rev line into a "build your own" platform. It's not the most loved product they offer but it's a solid tool, it's easy to work on, and it has a fair starting price. This would not really compete with their premium products but would really inject some life into that particular product line. They already offer several different bits that are compatible with them, so maybe adding a handful more to up the possible configurations.
-
Victorinox are certainly dull from a collector perspective, unless you like collecting the same thing over and over in different colours or with different patterned scales. However, from a user perspective, you know you can always go back and the model you want should you need to, knowing it will have everything it had last time, and at the same standard of quality. Boring but safe.
Leatherman however, have phased out all the tools of theirs I'd want to buy, except one (the Wave). When the inevitable happens and the plier head is "upgraded", there won't be a single tool in their line up that I'd want to buy as a user. Zip! Zilch! Nothing!
Gerber on the other hand, still have the Mp400, MP600, Diesel, Dime, Strata, and Balance, which has all proven perfectly capable in various settings, comfortable to use, and with better gripping areas ..... all at a more comfortable price too.
From a tool USER perspective, Vic or Gerber are offering me stuff I would want to buy (if I didn't already have them). Leatherman are not. Simple as that. Replicating the same ergonomic faux pas and impeded gripping areas in new models with premium pricing structures won't win me back either.
I appreciate others have different views and experiences, and don't have the issues I do with the current LM offerings

-
I like what Al said about Gerber. You get a top quality tool for a reasonable price and my butt hole doesn't seem to hurt like when I buy a Leatherman product

-
Custom loadout SAKs would be
amazingunaffordable!!
Seriously, the labour costs would be mind-boggling.But I think victorinox and leatherman and all others should open up to us the buyers and listen to what we want.
How hard would it be to create design software where we the buyers could interact. If one particular configuration was repeated say 500 times it should be put forward for future releases.
As it is, they all play the same game...."take it or leave it" seems to be their motto these days!

I think Leatherman should adapt their Wingman/Sidekick/Rev line into a "build your own" platform. It's not the most loved product they offer but it's a solid tool, it's easy to work on, and it has a fair starting price. This would not really compete with their premium products but would really inject some life into that particular product line. They already offer several different bits that are compatible with them, so maybe adding a handful more to up the possible configurations.
I assume you mean loved by MT maniacs like the crowd here. The Wingman has been a huge seller.
-
Custom loadout SAKs would be
amazingunaffordable!!
Seriously, the labour costs would be mind-boggling.But I think victorinox and leatherman and all others should open up to us the buyers and listen to what we want.
How hard would it be to create design software where we the buyers could interact. If one particular configuration was repeated say 500 times it should be put forward for future releases.
As it is, they all play the same game...."take it or leave it" seems to be their motto these days!

I think Leatherman should adapt their Wingman/Sidekick/Rev line into a "build your own" platform. It's not the most loved product they offer but it's a solid tool, it's easy to work on, and it has a fair starting price. This would not really compete with their premium products but would really inject some life into that particular product line. They already offer several different bits that are compatible with them, so maybe adding a handful more to up the possible configurations.
I assume you mean loved by MT maniacs like the crowd here. The Wingman has been a huge seller.
That is precisely what I meant. Good catch, I should have clarified. And FWIW I actually really like my Wingman. I would hazard a guess that I actually see more Wingmans or Sidekicks on "normal people" than any other type. Maybe MP600s, but it's CLOSE :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

