No new Leathermans in 2016?
-
What I'm getting at, is that it's a cumulative effect. Lots of people all having their slice of the cake. Over here taxation is applied twice as well, firstly as import duty (before agents and retailers add their percentage) then again as a sales tax of 20%. even if everyone has a modest but sustainable (for them) margin, the end price is still several multiples of what the manufacturer has to make it for. Over there the same applies too, but to a lesser extent as the logistics are cheaper, and there's less people in line wanting their slice
-
I'm not disputing you but how come Gerber can sell the MP600 so cheap ???
-
Same rules apply, but for the sake or arguement they can make it for half the price due to lower labour costs and other reduced overheads (they don't have the financial burdens our manufacturers do). Everyone applies the same percentages along the way, and it still hits the shelves at half the cost, but the manufacturer still only gets a wee slice of that retail price
-
This has me wondering why bother producing anything with so many parasites latching on along the way :-\
-
-
I like what Al said about Gerber. You get a top quality tool for a reasonable price and my butt hole doesn't seem to hurt like when I buy a Leatherman product

Steve,have you seen a doctor about that? :ahhh
You of all people should know what I'm talking about given your outrageous import prices. It's a REAL medical condition.
-
@ducttapetech said:
Good to know that my Surge is an over priced piece if junk. I don't know how I ever fixed anything with it. Good thing I never used it hard on anything like farm machinery, trucks, chainsaws, barbed wire, vacuum pumps, pressure regs, striped out nuts and bolts...It's good to know that your $100 tool does all the same things around the ranch that my $40 one does.
Sent from 9 miles from the face of the sun
-
I paid $80.00 for my Surge. And it came with a with leather sheath, two bit cards, bit extender, pocket clip and lanyard ring. And since my junk can do what the MP600 can do, is it still junk? Yes I paid more to get outside blades and a few cool features, but so did you when you got a Vic Spirit, and they cost just as much as a Surge. Guess Vics are junk too?
Either way, I am gonna use my junk and will be quite happy with my junk.
To each his own.I am done with this thread.
-
@ducttapetech said:
I paid $80.00 for my Surge. And it came with a with leather sheath, two bit cards, bit extender, pocket clip and lanyard ring. And since my junk can do what the MP600 can do, is it still junk? Yes I paid more to get outside blades and a few cool features, but so did you when you got a Vic Spirit, and they cost just as much as a Surge. Guess Vics are junk too?
Either way, I am gonna use my junk and will be quite happy with my junk.
To each his own.I am done with this thread.
Look elsewhere for an argument, I'm not interested.
Sent from 9 miles from the face of the sun
-
What about linesman plier based MT? Maybe a wire cutter based tool? Looks like I'll never get hired on at LM

-
I paid $80.00 for my Surge. And it came with a with leather sheath, two bit cards, bit extender, pocket clip and lanyard ring. And since my junk can do what the MP600 can do, is it still junk? Yes I paid more to get outside blades and a few cool features, but so did you when you got a Vic Spirit, and they cost just as much as a Surge. Guess Vics are junk too?
Either way, I am gonna use my junk and will be quite happy with my junk.
To each his own.I am done with this thread.
Look elsewhere for an argument, I'm not interested.
Sent from 9 miles from the face of the sun

Gentlemen,play nicely! By all means state your opinion,but there's no need for disrespect,either of a tool or a member!

-
From a personal standpoint, I am happy to see a company do a few things, and do them well, without having to release a new version every two weeks to keep the market interested.
but that's not how you can see much growth, and unless people are willing to pay twice as much for a product, we need to accept being the "guinea pigs" for companies to release unfinished or half-designed kit, to be tested by the user and save their R&D team from breaking a sweat.
It is the finding that balance between First Run - Review- Re-Release.
I worry sometimes that they do the first run, decide people are buying it as is, and then just pump them out, flaws and all.
I don't know what the quantity is that LM (or anyone else) has to sell to pay for the designers, tooling, marketing etc before they break even and can
A. Rest on their laurels and drive around in bentleys or
B. Design another one and start the whole damn process again.(Plus the age-old gripe for Aussies, our wholesale cost is well above US retail, never mind our Retail cost. LM (or Danner, or any other US brand that you can get) doesn't see an extra cent of it, but we end up paupers and unlikely to buy more of the product unless absolutely necessary, reducing overall sales)
EDIT: So apparently 50ft Trad said all the same thing, much more eloquently and with some math figures to really sell the concept.
So don't mind me, I'm just up past my bed time and talking crap.
-
How I wish LM or any company would send prototypes to MTo. Let some of you all have a go at the tool and follow up with feedback. I was pretty happy when the Surge got replaceable wire cutters, now I'd be even more stoked to see them with blunt nose.
The Wave would be kick arse with a scaled down blade exchanger and exterior scissors.
I don't know what the manufacturing process is but they sure did change the Juice pretty quick. I do wonder if they make prototypes of many of the things we talk about but someone ultimately says NO. Not suggesting we inspire these possible prototypes mind you. I figure there has got to be someone at LM who is chomping at the bit to design some wicked tool.
I've still yet to get the Raptor, which makes me wonder, how many tools need to be sold for them to feel they have a winner?
-
@Aloha007 said:
How I wish LM or any company would send prototypes to MTo. Let some of you all have a go at the tool and follow up with feedback. I was pretty happy when the Surge got replaceable wire cutters, now I'd be even more stoked to see them with blunt nose.The Wave would be kick arse with a scaled down blade exchanger and exterior scissors.
I don't know what the manufacturing process is but they sure did change the Juice pretty quick. I do wonder if they make prototypes of many of the things we talk about but someone ultimately says NO. Not suggesting we inspire these possible prototypes mind you. I figure there has got to be someone at LM who is chomping at the bit to design some wicked tool.
I've still yet to get the Raptor, which makes me wonder, how many tools need to be sold for them to feel they have a winner?
Had someone sent me a Signal to "test" I imagine I'd have a tad "friendlier" reception to it but I'm not about to PAY $120 for something that never should have left a trial phase! I'm not paying Leatherman for the privilege to try their ideas

-
I wanted to say, they probably bring out a Thread in gold... but apparently we already got this:

-
I paid $80.00 for my Surge. And it came with a with leather sheath, two bit cards, bit extender, pocket clip and lanyard ring. And since my junk can do what the MP600 can do, is it still junk? Yes I paid more to get outside blades and a few cool features, but so did you when you got a Vic Spirit, and they cost just as much as a Surge. Guess Vics are junk too?
Either way, I am gonna use my junk and will be quite happy with my junk.
To each his own.I am done with this thread.
Look elsewhere for an argument, I'm not interested.
Sent from 9 miles from the face of the sun

Gentlemen,play nicely! By all means state your opinion,but there's no need for disrespect,either of a tool or a member!

No argument here, I wasn't spoiling for a fight.
Sent from 9 miles from the face of the sun
-
What about linesman plier based MT? Maybe a wire cutter based tool? Looks like I'll never get hired on at LM

I agree. I'm tired of seeing needle nose pliers on EVERY MULTI IN THE MARKET
:bdh: :bdh: :bdh: :bdh: I would love to see all the other plier head styles being tried.OMG yes. A thousand times yes. SOG was almost on to something amazing with the PowerCut that never made it to production. Gerber offering a BN head for the MP600 is a wonderful idea (I think they should discontinue the NN for the 600). More than anything else, in the MT world they need to start offering some variation to pliers
-
What about linesman plier based MT? Maybe a wire cutter based tool? Looks like I'll never get hired on at LM

I agree. I'm tired of seeing needle nose pliers on EVERY MULTI IN THE MARKET
:bdh: :bdh: :bdh: :bdh: I would love to see all the other plier head styles being tried.OMG yes. A thousand times yes. SOG was almost on to something amazing with the PowerCut that never made it to production. Gerber offering a BN head for the MP600 is a wonderful idea (I think they should discontinue the NN for the 600). More than anything else, in the MT world they need to start offering some variation to pliers
Gerber's BN600 and Leatherman's Crunch are the only two multis that I know that offer a truly different plier head option.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
