Surge/ES4 possible mod question
-
Had to grind them down a lot to make them fit inside the handles.


-
It is a pretty close fit. I would lose gripping ability, but I think it would be worth it. I had to grind down so much, I lose crimping ability too.


-
Why doesn't LM already have this in stock. Just as you can buy replacement cutting edges there really should be wire-stripping blades too. Let the consumers fit the knife for how they want to use it and charge them the extra 10$ while they are at it...
@jlwatso1 said:
It is a pretty close fit. I would lose gripping ability, but I think it would be worth it. I had to grind down so much, I lose crimping ability too.Yeah, I could se the use for the crimping ability together with the wire-stripping. Could you fabricate your own cutting edges? Probably in a lesser steel, but they should be reasonably simple to shape with a Dremel.
-
I tried to grind the hinges like the Surge head, but there were holes in the Sheffield head from the locking mechanism.


-
Here are a couple pics of the replaceable wire strippers I tried to make... The Surge head has the indentions on opposite sides, so they don't have stripping ability like I would like. I really do wish Leatherman would make this happen!



-
I even feel like if Leatherman would have cut the indentions on the opposite side I could make it work. Wire strippers are opposite of the Surge head.

-
Some possible alternatives:
-
SOG wire stripper tool component (not a replacement for the pliers, would go in the handles but I have no idea about fit of the pivot and lock). NB IRRC not everyone rates them as very good at stripping wires.
-
Buy a Paladin PT-540 (not easy to find or cheap, but they do come with robust wire strippers in the pliers).
-
Just carry an extra E4 or ES4 (they are pretty small and light, and if you are already carrying a Surge around you aren't likely to even notice them)
:D
-
-
I have thought about just EDCing the ES4 also, I am just trying to consolidate my EDC... It gets a little out of hand at times

-
Buy a Paladin PT-540 (not easy to find or cheap, but they do come with robust wire strippers in the pliers).
Now that looks like it could have some possibilities!
I may just have to pick one up!
Thanks for the tip!
-
No problem! You realize I am still more than likely going to have to get an ES4 to try out and probably still won't abandon my mod quest to make my Surge the ultimate HVAC tool, but I'm sure this could hinder the process a little...
-
If you want to try teh SOG wire stripper route, i have one set to spare, unregistered shipment should be around 3,50€?!
PM me if interested. -
That would be awesome! Do you need a Surge awl or can opener?
-
Bear and Son have a wire stripper based multitool as well: http://www.bearandsoncutlery.com/index.php?src=directory&view=Products&submenu=Multi_Tools&category=MULTI-TOOLS&query=category.eq.MULTI-TOOLS&refno=18&srctype=Products_detail
-
Thanks! Those are pretty sweet! I like the price better, but I've never heard of Bear and Son before. How do they compare to Sog, LM, and Gerber?
-
@jlwatso1 said:
Thanks! Those are pretty sweet! I like the price better, but I've never heard of Bear and Son before. How do they compare to Sog, LM, and Gerber?I would rate Bear and Son as non-fancy, basic, well designed robust MTs. The wire stripper heads not as robust as their regular pliers (they are similar to the Squirt E4/ES4 heads but scaled up a bit). Nowhere near as robust as the Paladin PT-525 and PT-540 plier/stripper heads. The wire cutters are marked "Cut Copper only".
IMO Bear are at least as good a quality as SOG, LM and Gerber, if not better. They also re-labelled some of their tools under other brands (eg Craftsman, Nicholson, Crescent Toolzall)
Here is a thread about the Electrician MT:
/topic/49454 -
Thank you for the info! I will check out the thread. I'm sure you realize I have an addiction like most people on this sight....

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


