SAK Pocket Clip
-
Recon thread >> /post/890552
The plain edge black Sentinels are nice if they're still available.

-
WOW!!! Thanks for that link, very very nicely done. Do you mean a black bladed Sentinel? I see lots of Sentinels but not black blades.
-
Thanks! I got the all black Sentinel from Italy, along with an all black Trailmaster. I think they were available in France as well. Maybe search Noir (FR) or Nero (IT), but polished one hand versions in either plain or serrated are widely available on fleaBay and elsewhere.

-
Got mine here >> http://www.ebay.it/itm/Victorinox-Knife-SENTINEL-BLACK-Brunox-Original-SwissArmy-Italy-Limited-Edition-/250973405184?hash=item3a6f2e4000
The clip looks polished, but it's black, along with the liners and lock.

-
@twiliter said:
Good. The clips are solid in the scales, and the scales are solid to the pin ferrules. The 111mm pins and ferrules are bigger and hold tighter than the smaller models. The clip is not stiff enough to dislodge a factory fitted scale and I think the clip would either bend first or pull out of the scales, although I have not tested this theory. :ahhh The clip works fine with jeans and larger folded hems, no problems so far. Modding presents a problem, removing the scales damages the scale mounting recesses, so some kind of adhesive would probably be needed to reuse them. I avoided this on my Recon mod (top in photo) by disassembling a knife from the other side and carefully angling the pins out after warming the nylon. It's still tighter than Dick's hatband. :)Very cool bro!!!! 8)

-
What's the feeling on SAK's with the pocket clip, good or bad?
Find one of the Wenger RangerClip knives if you can:

Are the clips sturdy?
-
What's the feeling on SAK's with the pocket clip, good or bad?
Find one of the Wenger RangerClip knives if you can:

Are the clips sturdy?
Oh yea!
Cool! Thanks!!!! I have a couple of 151's and was considering taking one out of the pkg!!!

-
I need some 111 clip in my life for my Workchamp or GAK.
-
@HarleyXJGuy said:
I need some 111 clip in my life for my Workchamp or GAK.Roger +B still has a good 111mm clip option for scales with backtool cutouts, but requires scale *R&R. The Sentinel clip is nicer (factory), but no cutout models yet.

*remove and replace, not the mil. slang... ;)
-
I need some 111 clip in my life for my Workchamp or GAK.
Roger +B still has a good 111mm clip option for scales with backtool cutouts, but requires scale *R&R. The Sentinel clip is nicer (factory), but no cutout models yet.

*remove and replace, not the mil. slang... ;)
To bad, I was looking forward to a pocket clip and some time off.
-
I need some 111 clip in my life for my Workchamp or GAK.
Roger +B still has a good 111mm clip option for scales with backtool cutouts, but requires scale *R&R. The Sentinel clip is nicer (factory), but no cutout models yet.

*remove and replace, not the mil. slang... ;)
To bad, I was looking forward to a pocket clip and some time off.
No one gets everything they want bud....and no don't ask.

-
I need some 111 clip in my life for my Workchamp or GAK.
Roger +B still has a good 111mm clip option for scales with backtool cutouts, but requires scale *R&R. The Sentinel clip is nicer (factory), but no cutout models yet.

*remove and replace, not the mil. slang... ;)
To bad, I was looking forward to a pocket clip and some time off.
No one gets everything they want bud....and no don't ask.

But I was just going to say.........
-
[quote author=HarleyXJGuy link=topic=63663.msg1199525#msg1199525 date=1450512155]
I need some 111 clip in my life for my Workchamp or GAK.Roger +B still has a good 111mm clip option for scales with backtool cutouts, but requires scale *R&R. The Sentinel clip is nicer (factory), but no cutout models yet.

*remove and replace, not the mil. slang... ;)
To bad, I was looking forward to a pocket clip and some time off.
No one gets everything they want bud....and no don't ask.

But I was just going to say.........
[/quote]If you get a Spirit, you can stop searching for the perfect MT, that should afford you some real R&R. Still no clip though...

-
[quote author=twiliter link=topic=63663.msg1199584#msg1199584 date=1450535880]
[quote author=HarleyXJGuy link=topic=63663.msg1199525#msg1199525 date=1450512155]
I need some 111 clip in my life for my Workchamp or GAK.Roger +B still has a good 111mm clip option for scales with backtool cutouts, but requires scale *R&R. The Sentinel clip is nicer (factory), but no cutout models yet.

*remove and replace, not the mil. slang... ;)
To bad, I was looking forward to a pocket clip and some time off.
No one gets everything they want bud....and no don't ask.

But I was just going to say.........
[/quote]If you get a Spirit, you can stop searching for the perfect MT, that should afford you some real R&R. Still no clip though...

[/quote]Ok fine you talked me into it. You have my address right?
-
[quote author=parman53 link=topic=63663.msg1197651#msg1197651 date=1450197508]
What's the feeling on SAK's with the pocket clip, good or bad?Find one of the Wenger RangerClip knives if you can:

Are the clips sturdy?
Oh yea!
Cool! Thanks!!!! I have a couple of 151's and was considering taking one out of the pkg!!!

[/quote]Yeah...these are awesome!!!
Thanks Kampfer!! -
Get a suspension clip?


-
Please excuse me if I ask a question already answered here, on pocket clips. I'm new,and just beginning on my SAK quest, but not dumb. I did do my research here, before I asked. So, If I were attaching something to the scales of an OHT SAK. as I would like to do, I wouldn't screw into the nylon scales. I would: use a T-nut, or a Chicago Screw type fastener on the inside of the scale, the flange countersunk, and screw the clip fasteners thru the nylon scale into these new "nuts" on the inside of the scale. This would provide metal threads, and a larger surface/purchase for the screws. Has this been done on the SAKS? I have only seen one OHT without a scale, it was blown out of my hand and I lost the scale when stabbing a thief's tire. Dead tire, but I'm now using my OHT with one scale. Where would I find another? It was the side with the SAK emblem, and toothpick/tweezers. Am I on my own here? I would like a deep carry type clip, of the utmost strength and simplicity.
In fact, I would prefer to purchase, or contract with someone, (outside this forum so as not to break any rules,)to fabricate a layer divider, of any material, preferably titanium, or T-6 Al, with an integrated deep carry clip, clipping over the original nylon scale. this would give the best strength to a clip/mod. Has this been done or proposed? With only one scale on my OHT, this idea has been rolling around in my head for 6 yrs! Then I found this wonderful site, and now----Anything seems possible! You guys are great! My last choice, and possibly the best one, would be to fabricate Titanium, Alox, T-6 Al, or whatever metal, scales, with threaded holes for "so and so's" commonly available deep carry clip. If and when I can, I would like to write more on the SAK of my "dreams" It would be combining much of the technology I see you guys talking about, at the highest levels, in order to incorporate the Highest level of field utility. I wasn't aware of the assembly process of SAKs until I read this site. Damn if those pins aren't peened over a bushing, to which the scales attach. I was blown away by this simple process. I am impressed with the utility of design and manufacture. It (the SAK) lends itself to another higher order of utility, in terms of assembly/disassembly, repair, tool changes, cleaning, and on and on. Pick a frame size, and build and rebuild for life, as needs change. All this with screws and bushings, in stead of pins and bushings. A few of you at the top of this pyramid are already doing this. My frame size would be a 111mm Vic SAK. I will write more about this under " Dream SAK" after I see answers to my questions/ideas above. And after I learn more about all this. Thanx, Will
This question may also be better suited to another thread here, R & D or the Custom thread, or possibly all three. I'll let the moderators decide.
-
[quote author=HarleyXJGuy link=topic=63663.msg1199674#msg1199674 date=1450553545]
[quote author=twiliter link=topic=63663.msg1199584#msg1199584 date=1450535880]
[quote author=HarleyXJGuy link=topic=63663.msg1199525#msg1199525 date=1450512155]
I need some 111 clip in my life for my Workchamp or GAK.Roger +B still has a good 111mm clip option for scales with backtool cutouts, but requires scale *R&R. The Sentinel clip is nicer (factory), but no cutout models yet.

*remove and replace, not the mil. slang... ;)
To bad, I was looking forward to a pocket clip and some time off.
No one gets everything they want bud....and no don't ask.

But I was just going to say.........
[/quote]If you get a Spirit, you can stop searching for the perfect MT, that should afford you some real R&R. Still no clip though...

[/quote]Ok fine you talked me into it. You have my address right?
[/quote]Thanks to the miracle of the interweb, I have all addresses worldwide, I just have to figure out which one is yours. :P
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

