High Tensile Wire Cutting Test, Warning: Minor Tool Abuse
-
....and why would a lobster need pliers ???
-
@zoidberg said:
Now onto the new blacktip.I cut it twice, in the hard wire notch and then in the middle of the wire cutters.
That didn't go too well. Cutters lock up and will need tidying. Slightly less effort required than the surge.
smurfed up the blacktip already?

I did the same thing with my other black tip the same result. -
That's why you can't have nice things. ::)
:P
:D
-
@powernoodle said:
It is good to see where the limit is, and I think you found it.Yeah, I would rather have an idea of them before an emergency than to find out during one.
-
That's the reason I carry a pair of Klein Iron Workers pliers in the truck and saddlebags. Spring return and tough enough to eat barb wire and nails. Multis of any flavor are a poor substitute....

Sent from 9 miles from the face of the sun
-

try compressionless bike outer cables for a test... i doubt any multitool cutter will survive that...
-
@zoidberg said:
I recently sold my backup Gerber so I wasn't brave enough to try these. Yet. I might feel up to it later.Be prepared that you may need to replace the replaceable Gerber cutters. IIRC they are very hard and very brittle, so they do well on cutting large quantities of softer wire (which is what they were designed for), but tend to break on hard wire.
If I had to use an MT to cut large(ish) diameter hard wire I'd consider filing a notch first to reduce the chance of smurfing up the cutters. Or even just file a couple of notches and then bend the wire back and forth until it breaks at the weak point you have created. There is often "more than one way to skin a cat" if you use your imagination and think laterally.
-
I recently sold my backup Gerber so I wasn't brave enough to try these. Yet. I might feel up to it later.
Be prepared that you may need to replace the replaceable Gerber cutters. IIRC they are very hard and very brittle, so they do well on cutting large quantities of softer wire (which is what they were designed for), but tend to break on hard wire.
If I had to use an MT to cut large(ish) diameter hard wire I'd consider filing a notch first to reduce the chance of smurfing up the cutters. Or even just file a couple of notches and then bend the wire back and forth until it breaks at the weak point you have created. There is often "more than one way to skin a cat" if you use your imagination and think laterally.
That is why I didn't want to try them.
However IMO they aren't any good at cutting soft wire either.
So I might as well kill them.My original idea was to test multiple cutters going from easy to hard stuff and noting the outcome.
Once I sold the backup I thought I would flag the test.
Now it is just a time thing, if I can find some I'll probably do it.I wonder how hard it is to file HT fencing wire?
-

try compressionless bike outer cables for a test... i doubt any multitool cutter will survive that...
That would be a good test for the new Surge, wish I had some lying around.
if you got a nearby local bike shop, ask for a few cut pieces or old ones to be binned.
If I wanted to mash the cutters I would go cut fish hooks. :P
-

try compressionless bike outer cables for a test... i doubt any multitool cutter will survive that...
That would be a good test for the new Surge, wish I had some lying around.
if you got a nearby local bike shop, ask for a few cut pieces or old ones to be binned.
If I wanted to mash the cutters I would go cut fish hooks. :P
Learned that first hand. My Wave now features replaceable cutters for that exact reason.
-
[quote author=spyghost link=topic=63712.msg1199805#msg1199805 date=1450570050]

try compressionless bike outer cables for a test... i doubt any multitool cutter will survive that...
That would be a good test for the new Surge, wish I had some lying around.
if you got a nearby local bike shop, ask for a few cut pieces or old ones to be binned.
If I wanted to mash the cutters I would go cut fish hooks. :P
Learned that first hand. My Wave now features replaceable cutters for that exact reason.
[/quote]Still need to be careful, don't ask me how I know.

-
Both the surge and blacktip have received some tlc, the gerber still has the cutters intact, for now anyway.
-
I wonder how well the edge of a multitool file would work at "cutting" a high tensile wire.

-
Zoidberg
So, are you giving both the SOG and Leatherman, a FAIL here?
It sounds like the HT wire buggered up both tools?
If so, I would have put my wager on the SOG to win by a nose
SOG MTs seem to be the best performers in wire cutting tasks, IMOMy MP600 replaceable cutters failed ( shattered) on a wire coat hanger test cut a while back, so now are on relatively lighter duty
And my Rebar failed a stranded 12 gauge wire test recently, as well, just mashed it and had to be pried apartSo yeah, give me my Channel Lok diagonal cutters every time
What does Marcellus Wallace look like?
-
@dks said:
...and it is good to remember how much better proper tools work, compared to multi tools.True words, which demonstrate the underlying principal that everything entails a tradeoff. The best tools for the job generally cannot be carried all day everyday in a belt sheath. But the convenience of an MT brings with it inherent limitations in utility. That's a sliding scale that we have to constantly navigate. Is this job worth the cost of walking or driving back to the toolbox?
I characterize an MT primarily as a convenience item that saves me the time and effort of going to the toolbox - which may be miles away. But we have to know its limitations, which Mr. Z's test amply demonstrated. However, when we constrain ourselves to those limitations, an MT can save the day.
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


