Surge/ES4 possible mod question
-
@jlwatso1 said:
Thanks! Those are pretty sweet! I like the price better, but I've never heard of Bear and Son before. How do they compare to Sog, LM, and Gerber?I would rate Bear and Son as non-fancy, basic, well designed robust MTs. The wire stripper heads not as robust as their regular pliers (they are similar to the Squirt E4/ES4 heads but scaled up a bit). Nowhere near as robust as the Paladin PT-525 and PT-540 plier/stripper heads. The wire cutters are marked "Cut Copper only".
IMO Bear are at least as good a quality as SOG, LM and Gerber, if not better. They also re-labelled some of their tools under other brands (eg Craftsman, Nicholson, Crescent Toolzall)
Here is a thread about the Electrician MT:
/topic/49454 -
Thank you for the info! I will check out the thread. I'm sure you realize I have an addiction like most people on this sight....

-
Here is a thread about the Electrician MT:
/topic/49454
[/quote]Wow! That is a pretty sweet looking collection Chako has! I'm sure that drawer is just a taste of the entire collection!

-
There sure are a lot of knowledgeable people on this sight!
though I haven't been a member long, I feel very connected! It seems like a very tight knit community. 
-
Is it possible to be overjoyed and bumbed out at the same time? My PT-540 arrived today, but it is missing a couple parts... The seller listed them and took picks- I just didn't pay attention! Do the new handle covers fit the PT-540? And if so, which ones? The Power assist handle cover or the power lock handle cover? Also, it is missing the tool lock/release on one side. Any chance one would work from a newer version or any one have a doner tool? Oh yah, and will a new file fit?



-
More pics



-
The main thing I was wanting was the PT-540 head. Would it be better to just add it to a newer SOG? As much as I would like it to look original, I'm more after functionality. I plan to make it an EDC tool.
-
@jlwatso1 said:
The main thing I was wanting was the PT-540 head. Would it be better to just add it to a newer SOG? As much as I would like it to look original, I'm more after functionality. I plan to make it an EDC tool.The head may not fit in another SOG tool, I don't know, but other SOG handle tools will fit in this one. For the broken lock, however, your best bet might be to send it in for warranty repair.
As for the handle cover, use it for a while with just the one on and see if you like it or not. A lot of people find them annoying to use and choose not to have them.
-
I found this from a post back in 2007
http://www.paladin-tools.com/view_tool.php?id=490When I went to the link, it was for Greenlee, but they had Paladin tools on the site. I emailed their customer service and inquired about warranty or even paying for replacement parts. I received an email back saying it could take from 24-48 hrs for them to respond depending on how busy they were, but with it being so close to Christmas, it wouldn't surprise me if it takes longer.
SOG wouldn't warranty it would they?
-
I went ahead and sent an email to SOG's warranty department just in case. I wouldn't even mind buying a locking mechanism if they have one available.
-
I think warranty might be your best bet because as far as I am aware, you can't purchase the locking mechanism as a replacement part.
If their warranty is on par with Leatherman, they will fix it for you but I have no experience with SOG's warranty, nor have I read much of other people's experience with it.
Just make sure they don't fly off the handle and replace it with another tool.
-
@jlwatso1 said:
Is it possible to be overjoyed and bumbed out at the same time? My PT-540 arrived today, but it is missing a couple parts... The seller listed them and took picks- I just didn't pay attention! Do the new handle covers fit the PT-540? And if so, which ones? The Power assist handle cover or the power lock handle cover? Also, it is missing the tool lock/release on one side. Any chance one would work from a newer version or any one have a doner tool? Oh yah, and will a new file fit?First off, congrats! I would love to snag one of those.
The handle cover from a power lock will fit it. A new lock from a Power lock "should" work and a new file will fit in it as long as you switch it with a long tool. Also you can put Paladin head in a newer power lock or Power Assist. But you might lose the mechanism under the plied head for the wire strippers.
SOG does have a great customer service and just maybe able to hook you up. -
Sweet! Hopefully they get back to me!

-
Lane,
Unfortunately we no longer carry this product and we do not have any replacement parts.Thank you,
Danielle Glenn
Greenlee CSGot this reply back from Greenlee Customer Service. Guess I will wait and see what SOG says.
-
Here is what I got back from SOG.
On Dec 23, 2015, at 5:59 PM, Warranty warranty@sogknives.com wrote:
Good Afternoon,
Thank you for contacting SOG. Unfortunately we don't warranty the Paladin tools. I would get a hold of Paladin to see if they may be able to help you. The only thing I can offer you is our website. The components that are on our site may work for your tool. Sorry that I couldn't give you a better answer. Let me know if you have any more questions.
Thank you!GIOVANNI GUAJARDO / WARRANTY LEAD
SOG SPECIALTY KNIVES & TOOLS
6521 212TH ST SW * LYNNWOOD, WA 98036
O: 425.771.6230 x229 / F: 425.771.7689My reply
Thank you for getting back to me. Unfortunately Paladin does not warranty or carry any parts. I have browsed around your site and the only thing I can't fined is the locking mechanism. I have heard that the ones off of some of your other tools currently in production will work. Is there any way I could purchase two of them?
His reply
I'm not understanding what you are meaning by the locking mechanism? Can I have you send me a picture of what you're talking about?
I sent some pics of the missing tool lock (locking mechanism). Hope I hear something Monday.
-
I get the impression this poindexter is a suit and tie and doesn't understand how the tools actually work. But he sounds like a nice enough guy and it sounds like he will help you out if he can. Hope you get the stuff you need.
-
I've been eyeing the tool lock off of the Power Assist S66. Maybe he could get me the dimensions off of them. There might be a little Dremel work nessicery on the PT-540 frame, but I like how they don't hang over the sides like the originals and they look pretty slick!

-
Ok... Watched a video on the power assist. Not real impressed... I like the assisted open on the straight edge blade, but looks like you need to be a lefty to deploy the serrated blade. Plus you loose a lot of tools for that option. Think I see a power lock in my future. I tried just pricing out all the new tools I want to swap out and the covers and it looks like it is cheaper to just buy a new tool. Plus the missing tool lock which I'm not sure I will be able to buy. Now the question is new parts on the old frame or old PT-540 head on the new tool?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
