High Tensile Wire Cutting Test, Warning: Minor Tool Abuse
-

Did you also test the stripped bike brake cable with the Surge and the Blacktip?
I had problems with the Surge (but not with the Rebar head in a Charge) and for me, the Spirit cut the brake cable very well (Quick Test: MTs vs. Bike Break Cable). -
Did you also test the stripped bike brake cable with the Surge and the Blacktip?
I had problems with the Surge (but not with the Rebar head in a Charge) and for me, the Spirit cut the brake cable very well (Quick Test: MTs vs. Bike Break Cable).Yes. No problems with either tool. Just didn't bother taking pics of everything.
-

Did you also test the stripped bike brake cable with the Surge and the Blacktip?
I had problems with the Surge (but not with the Rebar head in a Charge) and for me, the Spirit cut the brake cable very well (Quick Test: MTs vs. Bike Break Cable).Yes. No problems with either tool. Just didn't bother taking pics of everything.
Am I correct assuming you used the wire-cutters on the Surge?
-

Did you also test the stripped bike brake cable with the Surge and the Blacktip?
I had problems with the Surge (but not with the Rebar head in a Charge) and for me, the Spirit cut the brake cable very well (Quick Test: MTs vs. Bike Break Cable).Yes. No problems with either tool. Just didn't bother taking pics of everything.
Am I correct assuming you used the wire-cutters on the Surge?
I tried both the hard wire notch and the cutters.
-
Good info there Z, thanks! :)
-
Great bit of testing there buddy!!!

Sent from my iPhone using Tapatalk
-
Great test !
-
A pair of dedicated pliers are looking more and more good to me.

-
pincers, lobster pincers...
-
ugly!!!!!
-
Looks like a Batman villain.
Are they using orange jumpsuits in Arkham?
-
I recently sold my backup Gerber so I wasn't brave enough to try these. Yet. I might feel up to it later.
Be prepared that you may need to replace the replaceable Gerber cutters. IIRC they are very hard and very brittle, so they do well on cutting large quantities of softer wire (which is what they were designed for), but tend to break on hard wire.
If I had to use an MT to cut large(ish) diameter hard wire I'd consider filing a notch first to reduce the chance of smurfing up the cutters. Or even just file a couple of notches and then bend the wire back and forth until it breaks at the weak point you have created. There is often "more than one way to skin a cat" if you use your imagination and think laterally.
That is why I didn't want to try them.
However IMO they aren't any good at cutting soft wire either.
So I might as well kill them.My original idea was to test multiple cutters going from easy to hard stuff and noting the outcome.
Once I sold the backup I thought I would flag the test.
Now it is just a time thing, if I can find some I'll probably do it.I wonder how hard it is to file HT fencing wire?
Practically impossible. I learned this the hard way when trying to free a sheep stuck in the fence in rain and mud. The wire cutters on my first generation LM Super Tool wouldn't go through the 50 year old fencing wire we have on the farm since I couldn't get enough leverage, so I tried the teeth along the bottom edge of the file. It barely scratched it. While I went to get the bolt cutters to cut the wire, my grandparents were able to free the sheep without tools, so at least the story had a happy ending.
-
I recently sold my backup Gerber so I wasn't brave enough to try these. Yet. I might feel up to it later.
Be prepared that you may need to replace the replaceable Gerber cutters. IIRC they are very hard and very brittle, so they do well on cutting large quantities of softer wire (which is what they were designed for), but tend to break on hard wire.
If I had to use an MT to cut large(ish) diameter hard wire I'd consider filing a notch first to reduce the chance of smurfing up the cutters. Or even just file a couple of notches and then bend the wire back and forth until it breaks at the weak point you have created. There is often "more than one way to skin a cat" if you use your imagination and think laterally.
That is why I didn't want to try them.
However IMO they aren't any good at cutting soft wire either.
So I might as well kill them.My original idea was to test multiple cutters going from easy to hard stuff and noting the outcome.
Once I sold the backup I thought I would flag the test.
Now it is just a time thing, if I can find some I'll probably do it.I wonder how hard it is to file HT fencing wire?
Practically impossible. I learned this the hard way when trying to free a sheep stuck in the fence in rain and mud. The wire cutters on my first generation LM Super Tool wouldn't go through the 50 year old fencing wire we have on the farm since I couldn't get enough leverage, so I tried the teeth along the bottom edge of the file. It barely scratched it. While I went to get the bolt cutters to cut the wire, my grandparents were able to free the sheep without tools, so at least the story had a happy ending.
Good story! I found bending ht back and forth is usually quicker than a file or hacksaw.

-
[quote author=zoidberg link=topic=63712.msg1199423#msg1199423 date=1450488689]
I recently sold my backup Gerber so I wasn't brave enough to try these. Yet. I might feel up to it later.Be prepared that you may need to replace the replaceable Gerber cutters. IIRC they are very hard and very brittle, so they do well on cutting large quantities of softer wire (which is what they were designed for), but tend to break on hard wire.
If I had to use an MT to cut large(ish) diameter hard wire I'd consider filing a notch first to reduce the chance of smurfing up the cutters. Or even just file a couple of notches and then bend the wire back and forth until it breaks at the weak point you have created. There is often "more than one way to skin a cat" if you use your imagination and think laterally.
That is why I didn't want to try them.
However IMO they aren't any good at cutting soft wire either.
So I might as well kill them.My original idea was to test multiple cutters going from easy to hard stuff and noting the outcome.
Once I sold the backup I thought I would flag the test.
Now it is just a time thing, if I can find some I'll probably do it.I wonder how hard it is to file HT fencing wire?
Practically impossible. I learned this the hard way when trying to free a sheep stuck in the fence in rain and mud. The wire cutters on my first generation LM Super Tool wouldn't go through the 50 year old fencing wire we have on the farm since I couldn't get enough leverage, so I tried the teeth along the bottom edge of the file. It barely scratched it. While I went to get the bolt cutters to cut the wire, my grandparents were able to free the sheep without tools, so at least the story had a happy ending.
Good story! I found bending ht back and forth is usually quicker than a file or hacksaw.

[/quote]The bending thing is great when putting up a fence but it's not always that easy to do when trying to remove livestock from said fence.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

