WoodsDuck's December Surge Challenge Thread. Mundanity, ho!
-
Day 17-
This is the laziest week I've had all year. Getting a bit antsy in fact.

-
Day 18-
The serrated blade makes a pretty good bread knife


-
Day 19-
Stopped by the Home Depot while I was out and about this evening...

-
Day 20-
Surge vs walnuts;

Yeah, pretty much as expected.

-
Day 21-
Another late one

With all this lovely December rain, you gotta have the proper headgear;

-
Day 22-
Surge, what are you doing up there??

-
Day 23-
Came home from the grocery to find a package waiting on the porch in the rain
;
Wonder what's inside


Hm.. Two very well wrapped items.

Oh look, two new playmates!

-
NICE!
Where did you find the older blunt nose head? 
-
@zoidberg said:
NICE!
Where did you find the older blunt nose head?Got them both off ebay. I actually bought them for parts, because they both have a broken implement and I want to mod my other tools. I have a Pro Scout coming in the mail too, so I'm thinking I'll swap out the combo blade on that one for a serrated blade, then put BN pliers on it. And I'm going to see if the file off a 600 will fit in the spot where the 400's blade is so I can have a bladeless tool. It looks like the file "tang" is thinner than the blade, but I'm hoping an extra washer or two can make it work.
Of course I can't do anything until the spanner I ordered arrives.
-
NICE!
Where did you find the older blunt nose head?Got them both off ebay. I actually bought them for parts, because they both have a broken implement and I want to mod my other tools. I have a Pro Scout coming in the mail too, so I'm thinking I'll swap out the combo blade on that one for a serrated blade, then put BN pliers on it. And I'm going to see if the file off a 600 will fit in the spot where the 400's blade is so I can have a bladeless tool. It looks like the file "tang" is thinner than the blade, but I'm hoping an extra washer or two can make it work.
Of course I can't do anything until the spanner I ordered arrives.
You don't have to wait, just use pliers on the donor handle then use the handle as the spanner.
The MP400 is set up slightly different to the MP600, I'm sure you'll see what I meant when you play with it.
Edit: my 17th K post. :ahhh
-
NICE!
Where did you find the older blunt nose head?Got them both off ebay. I actually bought them for parts, because they both have a broken implement and I want to mod my other tools. I have a Pro Scout coming in the mail too, so I'm thinking I'll swap out the combo blade on that one for a serrated blade, then put BN pliers on it. And I'm going to see if the file off a 600 will fit in the spot where the 400's blade is so I can have a bladeless tool. It looks like the file "tang" is thinner than the blade, but I'm hoping an extra washer or two can make it work.
Of course I can't do anything until the spanner I ordered arrives.
You don't have to wait, just use pliers on the donor handle then use the handle as the spanner.
The MP400 is set up slightly different to the MP600, I'm sure you'll see what I meant when you play with it.
Edit: my 17th K post. :ahhh
Nice! Congrats!

-
NICE!
Where did you find the older blunt nose head?Got them both off ebay. I actually bought them for parts, because they both have a broken implement and I want to mod my other tools. I have a Pro Scout coming in the mail too, so I'm thinking I'll swap out the combo blade on that one for a serrated blade, then put BN pliers on it. And I'm going to see if the file off a 600 will fit in the spot where the 400's blade is so I can have a bladeless tool. It looks like the file "tang" is thinner than the blade, but I'm hoping an extra washer or two can make it work.
Of course I can't do anything until the spanner I ordered arrives.
You don't have to wait, just use pliers on the donor handle then use the handle as the spanner.
The MP400 is set up slightly different to the MP600, I'm sure you'll see what I meant when you play with it.
Edit: my 17th K post. :ahhh
Nice! Congrats!

Thank you mate.

-
NICE!
Where did you find the older blunt nose head?Got them both off ebay. I actually bought them for parts, because they both have a broken implement and I want to mod my other tools. I have a Pro Scout coming in the mail too, so I'm thinking I'll swap out the combo blade on that one for a serrated blade, then put BN pliers on it. And I'm going to see if the file off a 600 will fit in the spot where the 400's blade is so I can have a bladeless tool. It looks like the file "tang" is thinner than the blade, but I'm hoping an extra washer or two can make it work.
Of course I can't do anything until the spanner I ordered arrives.
You don't have to wait, just use pliers on the donor handle then use the handle as the spanner.
The MP400 is set up slightly different to the MP600, I'm sure you'll see what I meant when you play with it.
Edit: my 17th K post. :ahhh
By the way, I have had almost no luck using pliers to do the job. I've gotten the screw to turn a couple mm, but most I've just damaged it.
-
NICE!
Where did you find the older blunt nose head?Got them both off ebay. I actually bought them for parts, because they both have a broken implement and I want to mod my other tools. I have a Pro Scout coming in the mail too, so I'm thinking I'll swap out the combo blade on that one for a serrated blade, then put BN pliers on it. And I'm going to see if the file off a 600 will fit in the spot where the 400's blade is so I can have a bladeless tool. It looks like the file "tang" is thinner than the blade, but I'm hoping an extra washer or two can make it work.
Of course I can't do anything until the spanner I ordered arrives.
You don't have to wait, just use pliers on the donor handle then use the handle as the spanner.
The MP400 is set up slightly different to the MP600, I'm sure you'll see what I meant when you play with it.
Edit: my 17th K post. :ahhh
By the way, I have had almost no luck using pliers to do the job. I've gotten the screw to turn a couple mm, but most I've just damaged it.
Heat it up with a lighter to break the loctite... ;)
-
[quote author=zoidberg link=topic=63424.msg1201753#msg1201753 date=1450912542]
NICE!
Where did you find the older blunt nose head?Got them both off ebay. I actually bought them for parts, because they both have a broken implement and I want to mod my other tools. I have a Pro Scout coming in the mail too, so I'm thinking I'll swap out the combo blade on that one for a serrated blade, then put BN pliers on it. And I'm going to see if the file off a 600 will fit in the spot where the 400's blade is so I can have a bladeless tool. It looks like the file "tang" is thinner than the blade, but I'm hoping an extra washer or two can make it work.
Of course I can't do anything until the spanner I ordered arrives.
You don't have to wait, just use pliers on the donor handle then use the handle as the spanner.
The MP400 is set up slightly different to the MP600, I'm sure you'll see what I meant when you play with it.
Edit: my 17th K post. :ahhh
By the way, I have had almost no luck using pliers to do the job. I've gotten the screw to turn a couple mm, but most I've just damaged it.
Heat it up with a lighter to break the loctite... ;)
[/quote]Actually, I had been doing that. But I think it wasn't getting heated enough since I was afraid of damaging the darn plastic lock release, because I really blasted it with the lighter and it finally came loose

Thanks for the tip about using the handle as a spanner though, I see what you mean and that is just crazy helpful.
-
[quote author=WoodsDuck link=topic=63424.msg1201757#msg1201757 date=1450912871]
[quote author=zoidberg link=topic=63424.msg1201753#msg1201753 date=1450912542]
NICE!
Where did you find the older blunt nose head?Got them both off ebay. I actually bought them for parts, because they both have a broken implement and I want to mod my other tools. I have a Pro Scout coming in the mail too, so I'm thinking I'll swap out the combo blade on that one for a serrated blade, then put BN pliers on it. And I'm going to see if the file off a 600 will fit in the spot where the 400's blade is so I can have a bladeless tool. It looks like the file "tang" is thinner than the blade, but I'm hoping an extra washer or two can make it work.
Of course I can't do anything until the spanner I ordered arrives.
You don't have to wait, just use pliers on the donor handle then use the handle as the spanner.
The MP400 is set up slightly different to the MP600, I'm sure you'll see what I meant when you play with it.
Edit: my 17th K post. :ahhh
By the way, I have had almost no luck using pliers to do the job. I've gotten the screw to turn a couple mm, but most I've just damaged it.
Heat it up with a lighter to break the loctite... ;)
[/quote]Actually, I had been doing that. But I think it wasn't getting heated enough since I was afraid of damaging the darn plastic lock release, because I really blasted it with the lighter and it finally came loose

Thanks for the tip about using the handle as a spanner though, I see what you mean and that is just crazy helpful.
[/quote]You can pop the springs off the plastic bits too, makes it a little easier to keep them out of the way.

-
Day 24-
Merry Christmas MTO!

I expect a lot of us will put our Surges to work the next couple days opening gifts and preparing food

I'm the guy in my family people usually turn to for a knife, so mine is likely to get passed around a bit.
For my pic today, here's a shot of the Surge with my walking stick;

-
On second thought, maybe I'll bring the Dime to pass around. Don't want anyone dropping a Surge, blade extended, on their foot or anything

-
Day 25-
Merry Christmas (again)!
Long day, but I managed to grab a shot of the Surge with some of my gifts.
Not the laptop though, that was a gift I bought for someone else.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
