Swisschamp owners club
-
-
This Christmas my Stepson and his Wife did a lot of Home made gifts. One was Altoid survival kit. Here's mine with my Swisschamp.

-
By coincidence, I too have joined this club now. Through facebook, I found a guy who had three pocketknives for sale. He obviously didn't know much about them and I ended up paying 20 dollars for all three. I knew at least one of them was problably a genuine SAK, but didn't know anything about the two other ones.
When they arrived, the first thing I noticed, was, like I suspected, one genuine SAK. The other were a fishers knife and a fake SAK - those two, have gotten zero attention, since I found out that the SAK is a Swisschamp.
Unfortunately, the previous owner didn't seem to like SAKs all that much. When I got it, several of the implements had some sort of goop on them, the fish scaler and saw blade were stuck together, the file and small blade were stuck closed and the springs for the pliers and scissors were both bent. The pliers spring had been "opened" out, so it had almost no spring in it at all and the scissors spring had been misaligned, so it would spring to the side of the scissors instead.The only thing I've managed to do with it so far, is a liberal oiling, in the hopes to free up the file and small blade and about 4 or 5 hours soak in soapy water - just hot water and dish-soap. Used compressed air to blow out the rest of the water and dried it off with a towel. Got a lot of the goop with this approach, but the plier and main blade still shows sign of something.
I've got it soaking again right now and will problably go at it, with an old toothbrush, later on the day. Incredibly enough, the scales still have the toothpick, tweezer and steel pin in them; only the pen is missing. If I can get it clean and in good condition again, I'll problably replace the scales together with the "scale-tools".
Really looking forward to getting to use this thing. It seemed huge at first, but after handling it bit and trying to get it working a bit more smooth, I've really started liking it. It might even replace my Explorer in my work-edc.Sorry for the ramble, I'm just excited. :D





-
Nice fined mate and welcome to the club

-
NIce find

I want to be in this club too. Almost same way like you, i have find my swisschamp from i guy who used it for breaking ice
. I told him that it is not for that kind of use, and he sold it to me for 14$. Little better condition than yours, i cleaned it with old toothbrush, oiled it, and now it is my primary edc. I really like it. Sometimes people don't know what they own.


-
@Deedee said:
NIce find
I want to be in this club too. Almost same way like you, i have find my swisschamp from i guy who used it for breaking ice
. I told him that it is not for that kind of use, and he sold it to me for 14$. Little better condition than yours, i cleaned it with old toothbrush, oiled it, and now it is my primary edc. I really like it. Sometimes people don't know what they own.Might just be the lighting, but I think yours seem matte? Of course, if it's been used for breaking ice, in a country where they use salt on the roads, that would explain it.
Would a chrome polishing compound like Autosol be too aggressive, to bring back the shine on a SAK?
-
Chrome compounds are toxic, and it's not OK to use it on SAK. And i don't think that autosol would help much. Mine is a mate, but i don't mind because all tools are in good condition and after oiling everything works perfect.
-
@Deedee said:
Chrome compounds are toxic, and it's not OK to use it on SAK. And i don't think that autosol would help much. Mine is a mate, but i don't mind because all tools are in good condition and after oiling everything works perfect.By toxic, do you mean toxic to ingest? I almost never use my multitools for food anyway, so that wouldn't bother me.
I've had pretty good results on other, older knives, with Autosol and I noticed my Swisschamp has a few rust-spots on the liners. I'm hoping it's just grime, that'll come off when I go at it with the toothbrush, but I'd like to have another alternative ready. :) -
I don't use my swisschamp for food very often, maybe sometimes to peel an apple, but i like to keep it clean (main blade wipe it with alcohol once a week) just in case you cut yourself. About autosol i dont think it is dangerous for ingest, because i suppose you don't use it very often. About those spots on liners you've mentioned, try polishing with toothpaste, sometimes it helps. I have used toothpaste for silver, and it cleans most of the spots and gives shine.
-
@Deedee said:
I don't use my swisschamp for food very often, maybe sometimes to peel an apple, but i like to keep it clean (main blade wipe it with alcohol once a week) just in case you cut yourself. About autosol i dont think it is dangerous for ingest, because i suppose you don't use it very often. About those spots on liners you've mentioned, try polishing with toothpaste, sometimes it helps. I have used toothpaste for silver, and it cleans most of the spots and gives shine.I had it soaking in soapy water for a few more hours and gave it a good scrub with the toothbrush. Got it all oiled up and ready for use - just need to sharpen the blades and open/close a few of the tools some times, to get them loosened up again. It's only on one pivot there's a problem, so I'm thinking it might have gotten a hit at some time in its life.
-
so glad that someone started this club. now I have one more thread to check every five minutes for something new. :ahhh
-
@gdoolittle said:
so glad that someone started this club. now I have one more thread to check every five minutes for something new. :ahhh
you leave it that long? -
I'm in as well. I have 2 Swisschamps, both with the old style magnifiers 8)

DaveBr
-
Come join Challenge
/topic/64172 -

New Swiss Champ Owner Club member reporting for duty!

-
New Swiss Champ Owner Club member reporting for duty!

nice and shinny
now get it out that box :D -

New Swiss Champ Owner Club member reporting for duty!

nice and shinny
now get it out that box :DYes Sir!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
