Spartan Saturday!
-
Spartan this morning (then Storm EDC this afternoon).

Storm EDC? That's not a good sign!
Will be up around 73F today, then slammed with severe storms (with lg hail/tornadoes) this afternoon, then the arctic front arrives, freezes everything in place and at that point it will snow a couple of inches.... :D
Oh good! Nothing serious

:ahhh :ahhh :ahhh -
My Boxing Day combo. Jelly Red Spartan and a pepsi bezel Orient diver.

-
Spartan this morning (then Storm EDC this afternoon).

Storm EDC? That's not a good sign!
Will be up around 73F today, then slammed with severe storms (with lg hail/tornadoes) this afternoon, then the arctic front arrives, freezes everything in place and at that point it will snow a couple of inches.... :D
Oh good! Nothing serious :whistle:
:ahhh :ahhh :ahhhLOL!!!! Nah, same old smurf, different month.... :D
-
-
Not really a Spartan for me today... but its smaller cousin was with me today... does a Tourist count or is it depending on the 7 mm difference?!
Just kidding as a Spartan is in the car ... and a Craftsman ... and a ... way too many and they seem to be everywhere ::) ::)
-
@Humppa said:
Not really a Spartan for me today... but its smaller cousin was with me today... does a Tourist count or is it depending on the 7 mm difference?!Just kidding as a Spartan is in the car ... and a Craftsman ... and a ... way too many and they seem to be everywhere ::) ::)
If I can get away with a Sportsman every so often then I think you're in the clear. :D
-
LOL!!! Indeed ...
-
-
Better set some rat traps!
-
Stylin' up the Standard today for a while on Boxing Day. Style shown in "not a knife" display mode. Practicing for later when I will have to do this to get into the stadium I'm sure. ::) Hoping I don't lose it (the Style, not my temper). :D

-
-
Stylin' up the Standard today for a while on Boxing Day. Style shown in "not a knife" display mode. Practicing for later when I will have to do this to get into the stadium I'm sure. ::) Hoping I don't lose it (the Style, not my temper). :D
Might be cheaper to loose your temper ;)
Yes, trouble is I won't lose one without the other...

-
As I'm new here, and new to this "avocation", I don't have many different SAKs. I don't have many at all as compared to most of you guys/gals. I have been carrying for a long time, and thru different periods of my life. But as I have been doing my "research" or reading here, to learn more about the modding, and as I looked at the Swiss Knife Valley, and the "root" site in Schwyz, I saw the assembly tooling for the manufacture of the Spartan. et al. Searching further, I found the pix of Spartan assembly at the Museum, and the U-tube videos of Spartan Assembly in The American Mall, I think, and at the 2011 Shot Show. Verrrrrrry interesting!! I decided right there and then, that I wanted my own Spartan, built in Schwyz. Well, that's an expensive trip, I can't do it right now, and it won't be my first "build". But I will settle for building one, some day, here in the US, on the jig. And if I get rich---who knows! Anyhow, If I ever get to do that, I might like to add my own alox scales, however. Maybe a few other changes, if possible. Anyhow. so this Christmas, this Saturday, and this thread, will remind me of that goal! Thank you guys,Happy Spartan Saturday, and Merry Christmas!
As I looked very close at the "pins" used, I noticed that they are just brass nails, made by the millions on a "cold heading" automated machine. Very common here in the US. They are indigenous to our Industrial base, here. I have stood next to the deafaning roar of these machines a few times. This is the first step in the manufacture of screw and bolt fasteners. This must be some of the "automated tooling" that Mr. Elsener's Dad installed in his factory in the "60s, as listed as a "first" in their historical cronology.
Sooooo, all you hot modders, why don't you all have a run of these "pins" made for yourselves. It would be a good little product for this site to support itself thru the EDC Source sales. so let's all network together and get a run of these made!! Spread them around among yourselves. As for the bushings, I'm still thinking about that!!The sale of those two items, could probably contribute greatly to this site. Buy 'em for a penny apiece, and sell a 3-pair set for $$$$whatever. You could cold head the back spring pins, also. From what I read, the different knife sizes have different pin and bushing sizes, this can all be done. Then we could have a "bin" of the critical modder parts!! The trick for "economy" or the economy of scale, would be to find someone somewhere, (possibly even @ the Vic factory) Hint, Hint
, who already has existing tooling, and skip or minimize the small tooling costs. Maybe one of you out there is already in the business, or next to the business. I have lost my contacts in this by now. Merry Christmas!!But to take this one step further......And to facillitate a modular type knife.....
I've noticed that there is (personal?)variation in the "pin" and "bushing" parts, among the top modders. I do not have a handle on this yet. Info is mum, I think. Anyhow, here's what I'd like to see: Pivot barrels, threaded completely thru the inside, also with other threads just on the ends, outside. Using the outside end threads, to hold the SAK layers together. with threaded bushings as "nuts". Make these threaded bushings or "nuts", to the same, present, stock, smooth outside dimensions, and with 2 outside flats for "wrench" purchase. The two bushings, on the outside of the pivot barrel, would hold the knife layers together. The end inside threads of the pivot bushing. would hold the alox scales on, with torx screws. This is what *I *prefer. (The material is variable) Or, the outside of the bushing nuts, which would be smooth like the original bushings, would be able to accept the original cellidor or nylon scales, exactly as they are, in a stock SAK. No one would know, with a cursory look, in this last configuration, if the SAK was modded or stock, without taking the scales off. I could draw this easily. Or take a picture. I have a picture, which I am trying to describe. I see fasteners almost like these, just on the knife kits sites, with only about 30 minutes of research. What I want, may already exist. I suppose the knife kit sites would easily understand this, and make them for SAKs across the board. Merry Christmas!
I might also like to see the dia of the pivots increased. but that would require drilling of all the SAK layers. This could easily be done, drilling out one larger thru hole, thru an assembled knife (minus scales), with 2 stock pins still installed and holding the knife layers together. Can you imagine a 2.5mm-4mm reamer? In other words, these "new" type threaded pivot barrels, and threaded bushing nuts, could be installed, without taking the knife layers apart! And from there, those of us that wanted to, could go Modular!! Or Ballistic!!

As I said previously, Brake for commas, it's easier to read and understand. Or, as suggested, just wait for the pix!
Also, my last extended "rant" or diatribe, or description, on SAK clips, ended the next day, with two *different *executions of SAK pocket clips.(I couldn't wait for my Spyderco clips.). They are unlike what I alluded to, and novel and unique, as far as my research shows. Both are totally functional, one is less than aesthetic. I am now putting them thru Will's "pre-use abuse". I am much less than fluent with pix on computers, than I am with words, IMHO! I do know, that "one pic, is worth a thousand words", and I would add that "One 'DO' is worth an infinite amount of pix and words." And, I like these clips so well, that I hesitate to send them into public domain. I will show them in person. You all may think that I am a nubie, and that I have no experience here, and that I am full of feces, but I am not new to design, or to new product development. The SAK is just another "vehicle' for my 'fertile' mind. Or maybe it's my 'fecal' mind!?! :o
Happy Hollidays! Thanx Oclip
-
Yesterday's combo.

-
-
Nothing special today but at least I remembered

-
-
-
Hudson's Bay Spartan with Surge looming... :ahhh

-
I'm with Humppa. Todays a day for a black Spartan. And a gnarly flint nodule :D

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




