And so it begins.... (My adventures into Alox!)
-
@jdindadell said:
I have the same blasting cabinet, have used it for a few years now.The trigger for the blasting gun failed quickly, so I gutted it. I have an adjustable air regulator mounted on the cabinet where the air supply goes in. This allows me to turn it on via the regulator and adjust the pressure, which varies the finish. I use "grit" which is cheaper than al oxide and seems to provide good results.
If you plan to remove paint or something that will produce larger pieces of waste I would suggest adding a layer of fine window screen to the underside of the mesh working plate. This will catch larger particles that will clog the fill tube. I also find it handy to have a catch can under the unit with a fine screen on the top so I can periodically strain out the media to get the large bits out. I strain the media before initial use as well. Might not be necessary if you use higher quality media. You can unclog the unit by forcing compressed air back through the media tube.
I also had to replace the light, as it failed, went with a more powerful dual bulb unit for more light. Also, make sure you install the thin clear plastic shields over the light and viewing windows. They are sacrificial, and will need to be swapped frequently. I also find it easier to use with less overhead light so if you can put it in a darker corner of the shop that helps. I also use a shop vac to evacuate the dust during use, that helps with visibility inside the cabinet as well. I plan to make a permanent dust extractor in a wooden cabinet. It will be quieter than the shop vac. There are some ideas online for building this with PVC pipe, etc.
I also plan to put a foot control for the air supply. I was going to get another trigger gun to replace the gutted one, but hand fatigue is an issue depending on how long you plan to use it. I have used my cabinet a lot, and with a few mods I feel it was well worth the price.
Good info thanks!
I figured Id have to DIY some things on this to get it the way I want, but its easier than starting from scratch.
This will only be used for glass bead surface finishing of Ti, so hopefully that should keep it pretty clean in there.
Im still shopping for a compressor. Could I not get by with a slightly lower CFM one and have a finer nozzle? That would keep the velocity high with the downside of blasting a smaller areas at one time.
-
My take on compressors is that more cfm and tank size is the way to go. Plus you need to look at duty cycle info for blasting, as you do use a lot of air. A larger tank can help with volume, but an undersized compressor will wear out quicker or just not be up to task.
-
Thank you @Syph007 [emoji106]. I have spent a pleasant day off work reading the entire thread, it shows a great deal of skill and craftsmanship and a real sense of pride in your work.
I like the "Gentleman" style of the Black with the brass accents, keep up the good work and I'm looking forward to seeing what 2016 has in store. Cheers.
-
@Boaz said:
Thank you @Syph007 [emoji106]. I have spent a pleasant day off work reading the entire thread, it shows a great deal of skill and craftsmanship and a real sense of pride in your work.I like the "Gentleman" style of the Black with the brass accents, keep up the good work and I'm looking forward to seeing what 2016 has in store. Cheers.
I remember when I worked in an office I used to read long threads to kill time during really boring days, so Im glad I could provide something for others to read. :D
For 2016 this is where Im going
- Mostly Ti conversions to all SAK sizes
- The only alox 93 scales I'll carry is hard anodized black
- Finish making the marlin spike tools for 91 and 93mm SAKs.
- Figure out how to do the Ti bead blast finish and have anodized accent details as well
- Maybe I'll finally cave in and order that Tormach Ive saved up for but too chicken to blow the $$$. I like the new little one they sell now with high rpm, I could do custom engraving/personalizing which alot of people ask for.
- New blade options in high end steel. Ive been getting this request alot and I really want to have something to offer.
- Buy myself a go pro and start doing work videos and updating my long neglected youtube
-
Thank you @Syph007 [emoji106]. I have spent a pleasant day off work reading the entire thread, it shows a great deal of skill and craftsmanship and a real sense of pride in your work.
I like the "Gentleman" style of the Black with the brass accents, keep up the good work and I'm looking forward to seeing what 2016 has in store. Cheers.
I remember when I worked in an office I used to read long threads to kill time during really boring days, so Im glad I could provide something for others to read. :D
For 2016 this is where Im going
- Mostly Ti conversions to all SAK sizes
- The only alox 93 scales I'll carry is hard anodized black
- Finish making the marlin spike tools for 91 and 93mm SAKs.
- Figure out how to do the Ti bead blast finish and have anodized accent details as well
- Maybe I'll finally cave in and order that Tormach Ive saved up for but too chicken to blow the $$$. I like the new little one they sell now with high rpm, I could do custom engraving/personalizing which alot of people ask for.
- New blade options in high end steel. Ive been getting this request alot and I really want to have something to offer.
- Buy myself a go pro and start doing work videos and updating my long neglected youtube
Sounds like a plan! I subscribed to your channel a little earlier, I hope the go pro idea moves up the list [emoji6]
-
Thank you @Syph007 [emoji106]. I have spent a pleasant day off work reading the entire thread, it shows a great deal of skill and craftsmanship and a real sense of pride in your work.
I like the "Gentleman" style of the Black with the brass accents, keep up the good work and I'm looking forward to seeing what 2016 has in store. Cheers.
I remember when I worked in an office I used to read long threads to kill time during really boring days, so Im glad I could provide something for others to read. :D
For 2016 this is where Im going
- Mostly Ti conversions to all SAK sizes
- The only alox 93 scales I'll carry is hard anodized black
- Finish making the marlin spike tools for 91 and 93mm SAKs.
- Figure out how to do the Ti bead blast finish and have anodized accent details as well
- Maybe I'll finally cave in and order that Tormach Ive saved up for but too chicken to blow the $$$. I like the new little one they sell now with high rpm, I could do custom engraving/personalizing which alot of people ask for.
- New blade options in high end steel. Ive been getting this request alot and I really want to have something to offer.
- Buy myself a go pro and start doing work videos and updating my long neglected youtube
Please come back to 84 mm line...! We want to see little brothers mods!!! :D
-
Thank you @Syph007 [emoji106]. I have spent a pleasant day off work reading the entire thread, it shows a great deal of skill and craftsmanship and a real sense of pride in your work.
I like the "Gentleman" style of the Black with the brass accents, keep up the good work and I'm looking forward to seeing what 2016 has in store. Cheers.
I remember when I worked in an office I used to read long threads to kill time during really boring days, so Im glad I could provide something for others to read. :D
For 2016 this is where Im going
- Mostly Ti conversions to all SAK sizes
- The only alox 93 scales I'll carry is hard anodized black
- Finish making the marlin spike tools for 91 and 93mm SAKs.
- Figure out how to do the Ti bead blast finish and have anodized accent details as well
- Maybe I'll finally cave in and order that Tormach Ive saved up for but too chicken to blow the $$$. I like the new little one they sell now with high rpm, I could do custom engraving/personalizing which alot of people ask for.
- New blade options in high end steel. Ive been getting this request alot and I really want to have something to offer.
- Buy myself a go pro and start doing work videos and updating my long neglected youtube
Please come back to 84 mm line...! We want to see little brothers mods!!! :D
Ah forgot 84mm is on the list. Next time I have 440c cut im going to make some backsprings for adding scissors to 84s.
-
Thank you @Syph007 [emoji106]. I have spent a pleasant day off work reading the entire thread, it shows a great deal of skill and craftsmanship and a real sense of pride in your work.
I like the "Gentleman" style of the Black with the brass accents, keep up the good work and I'm looking forward to seeing what 2016 has in store. Cheers.
I remember when I worked in an office I used to read long threads to kill time during really boring days, so Im glad I could provide something for others to read. :D
For 2016 this is where Im going
- Mostly Ti conversions to all SAK sizes
- The only alox 93 scales I'll carry is hard anodized black
- Finish making the marlin spike tools for 91 and 93mm SAKs.
- Figure out how to do the Ti bead blast finish and have anodized accent details as well
- Maybe I'll finally cave in and order that Tormach Ive saved up for but too chicken to blow the $$$. I like the new little one they sell now with high rpm, I could do custom engraving/personalizing which alot of people ask for.
- New blade options in high end steel. Ive been getting this request alot and I really want to have something to offer.
- Buy myself a go pro and start doing work videos and updating my long neglected youtube
The new Tormachs are looking really nice, and they seem to have some nice accessories. Your work is already amazing so I can't wait to see what you'll come up with next!!!
-
I finished this one up last night... the last Ti mod of 2015!


-
Nice

-
Interesting tool setup on that one[emoji106]
Sent from my SM-G920R4 using Tapatalk
-
-
-
Interesting tool setup on that one[emoji106]
Sent from my SM-G920R4 using Tapatalk
Your SAKs are next up. :D On the bench waiting....

Excellent [emoji106] Can't wait to see pics[emoji2]
Sent from my SM-G920R4 using Tapatalk
What are you getting [emoji14]ok:
My MechaRogue and Rogueneer are getting some work done. Mostly the Rogueneer though. Pics will show it all[emoji6]
Sent from my SM-G920R4 using Tapatalk
-
Always so shiny and pretty. Little works of art. My hand polishing takes forever and doesn't seem to get as even of a finish. I may have to get a polishing wheel for my bench grinder.
-
-
I finished this one up last night... the last Ti mod of 2015!

Is that a new config Syph? - Small blade and SD opposite the Phillips?? Or did I miss it earlier?
Nice one I like it :DIve done it a few times but its getting more requested. Pretty compact way to have alot of tools when a small blade works for most cutting tasks anyhow.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

