What did you use your Leatherman for today?
-
Used my modded Rebar to attempt a vacuum repair. Sadly, it needs a new motor, so I'll finish the repair in 7-10 business days.
-
-
Drove 7 hours home from Pittsburgh PA, unloaded a smurf load of luggage into my building's lobby, parked the truck and was walking home with my dog, thinking about beer, a shower, beer and sleep, when my wife calls and tells me the door knob came off the front door and she hopes I have pliers with me. We have one deadbolt lock, which we only use when we're away for awhile, that requires the door to be pulled tight against the jamb in order to lock and unlock it. I used my crunch to get a firm grip on the post, which had luckily not fallen out on the inside, and pulled the door hard and unlocked it. I probably could have done the same with non-locking pliers but the crunch just makes it easier

-
-
Did change car battery with ST300.
I also change vehicle battery tho I used my Wave. These are the times I so want to make a blunt nose MT.
Actually I had use for needlenose. There were some odd specific key to open battery (net image but same in my car. Small blunt of course ok as well if fit to square which was quite large):

I did just catch with needlenose and opened. Some torque was needed but jod done without starting to build key for a job :) Though understand blunt nose for opening bolts in small spaces like battery posts :)
-
@theonew said:
Drove 7 hours home from Pittsburgh PA, unloaded a smurf load of luggage into my building's lobby, parked the truck and was walking home with my dog, thinking about beer, a shower, beer and sleep, when my wife calls and tells me the door knob came off the front door and she hopes I have pliers with me. We have one deadbolt lock, which we only use when we're away for awhile, that requires the door to be pulled tight against the jamb in order to lock and unlock it. I used my crunch to get a firm grip on the post, which had luckily not fallen out on the inside, and pulled the door hard and unlocked it. I probably could have done the same with non-locking pliers but the crunch just makes it easier
Awesome story! You should submit that to Leatherman.

-
Actually, this was last night, but...
This weekend, I did the 12K major service on my Triumph Tiger 800. Valve check, change plugs, change coolant, oil change and changed brake fluid. I finished everything up and put all the bodywork back on before taking it on a test ride.
25 miles out, I stopped to check for leaks and whatnot and found one bodypanel bolt just barely hanging on. I guess I forgot to tighten it. It takes a 5 mm Allen--which I happen to always have in my Leatherman Charge ALX :D
Problem solved.
-
Such a terrific feeling to know you can solve those issues without missing a beat
.Did change car battery with ST300.
I also change vehicle battery tho I used my Wave. These are the times I so want to make a blunt nose MT.
Weird, I have to change the battery in my Ford Escape. It died this morning.
I can't complain I did get 5 year out of mine. It started to vent and corrosion was on the bracket that holds in in place. I sure hope I can get 5 out of this one.
-
Used the Blade of my Skeletool, to cut some isotape to fix the Car Batterie Charger Cable..
This blade is still verry sharp,
Ditnt used the Skeletool for Yeahrs.. -
@Aloha007 said:
Such a terrific feeling to know you can solve those issues without missing a beat
.Did change car battery with ST300.
I also change vehicle battery tho I used my Wave. These are the times I so want to make a blunt nose MT.
Weird, I have to change the battery in my Ford Escape. It died this morning.
I can't complain I did get 5 year out of mine. It started to vent and corrosion was on the bracket that holds in in place. I sure hope I can get 5 out of this one.
Same with this battery, I got a little over five years out of it. Got my money's worth out of it.
-
-
Nice job!
-
-
Nice job!
+1
Sent from my SM-G920R4 using Tapatalk
Agreed
. Nicely done -
Thanks

-
Sure you need MT when change curtains. Always some screw to be screwed..

-
I put some shelf units together for the local school using the Signal.
-
I have looked a flat use and got one. I was intrested to test as had to round other side from flat to smooth close operation after blunt nose modding. Flat did perform very well with quite stuck screw on ratchet.

Old ratchet did not make ratching sound and did not function very well anymore. It is model you could open so did open and oil inside. Now it is working great again.
-
light switch needed changing in the wifes camper - Juice C2 performed nicely :)


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



