Surge/ES4 possible mod question
-
I went ahead and sent an email to SOG's warranty department just in case. I wouldn't even mind buying a locking mechanism if they have one available.
-
I think warranty might be your best bet because as far as I am aware, you can't purchase the locking mechanism as a replacement part.
If their warranty is on par with Leatherman, they will fix it for you but I have no experience with SOG's warranty, nor have I read much of other people's experience with it.
Just make sure they don't fly off the handle and replace it with another tool.
-
@jlwatso1 said:
Is it possible to be overjoyed and bumbed out at the same time? My PT-540 arrived today, but it is missing a couple parts... The seller listed them and took picks- I just didn't pay attention! Do the new handle covers fit the PT-540? And if so, which ones? The Power assist handle cover or the power lock handle cover? Also, it is missing the tool lock/release on one side. Any chance one would work from a newer version or any one have a doner tool? Oh yah, and will a new file fit?First off, congrats! I would love to snag one of those.
The handle cover from a power lock will fit it. A new lock from a Power lock "should" work and a new file will fit in it as long as you switch it with a long tool. Also you can put Paladin head in a newer power lock or Power Assist. But you might lose the mechanism under the plied head for the wire strippers.
SOG does have a great customer service and just maybe able to hook you up. -
Sweet! Hopefully they get back to me!

-
Lane,
Unfortunately we no longer carry this product and we do not have any replacement parts.Thank you,
Danielle Glenn
Greenlee CSGot this reply back from Greenlee Customer Service. Guess I will wait and see what SOG says.
-
Here is what I got back from SOG.
On Dec 23, 2015, at 5:59 PM, Warranty warranty@sogknives.com wrote:
Good Afternoon,
Thank you for contacting SOG. Unfortunately we don't warranty the Paladin tools. I would get a hold of Paladin to see if they may be able to help you. The only thing I can offer you is our website. The components that are on our site may work for your tool. Sorry that I couldn't give you a better answer. Let me know if you have any more questions.
Thank you!GIOVANNI GUAJARDO / WARRANTY LEAD
SOG SPECIALTY KNIVES & TOOLS
6521 212TH ST SW * LYNNWOOD, WA 98036
O: 425.771.6230 x229 / F: 425.771.7689My reply
Thank you for getting back to me. Unfortunately Paladin does not warranty or carry any parts. I have browsed around your site and the only thing I can't fined is the locking mechanism. I have heard that the ones off of some of your other tools currently in production will work. Is there any way I could purchase two of them?
His reply
I'm not understanding what you are meaning by the locking mechanism? Can I have you send me a picture of what you're talking about?
I sent some pics of the missing tool lock (locking mechanism). Hope I hear something Monday.
-
I get the impression this poindexter is a suit and tie and doesn't understand how the tools actually work. But he sounds like a nice enough guy and it sounds like he will help you out if he can. Hope you get the stuff you need.
-
I've been eyeing the tool lock off of the Power Assist S66. Maybe he could get me the dimensions off of them. There might be a little Dremel work nessicery on the PT-540 frame, but I like how they don't hang over the sides like the originals and they look pretty slick!

-
Ok... Watched a video on the power assist. Not real impressed... I like the assisted open on the straight edge blade, but looks like you need to be a lefty to deploy the serrated blade. Plus you loose a lot of tools for that option. Think I see a power lock in my future. I tried just pricing out all the new tools I want to swap out and the covers and it looks like it is cheaper to just buy a new tool. Plus the missing tool lock which I'm not sure I will be able to buy. Now the question is new parts on the old frame or old PT-540 head on the new tool?

-
At this point, this is more of a SOG forum topic, but I thought I would give an update. SOG Warranty emailed me back and said they don't warranty Paladin tools. So... I went ahead and bought me a Powerlock. From the pictures, it looked like the piano lock tool locks, but sadly it was not. I have compared the two tools and it doesn't look like I will be able to put the locks on the PT-540 frame. The comfort grips do not fit either due to the frame being wider and longer. Since carrying the Powerlock for 4 days, I have decided that I would rather leave the covers off anyway.




-
Couple more pics


-
Damn. I was hoping you would be able to scavenge parts from the PL to fix the Paladin. Is it possible to switch the tools to the PL frame?
-
I don't think that will be a problem, but won't need them if I can't find a tool lock. I may have to fabricate one... Or two so they look the same.
-
That sounds like a good idea.
-
Started fabricating the first tool lock!




-
Took the tools out and popped the lock out. Then found some metal I had in the garage and bent it on the vice.




-
Traced the lock out on to the metal and started cutting it out with the Dremel. Used the sander to round it out.




-
More Dremel work.




-
Lock is functional. Just need to finish up some cosmetic details. Daughter woke up from her nap. I'll have to work on it another day. I hope I can duplicate it so the two sides match. I may put my initials on them instead of PT.




-
Nicely done !
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login