Victorinox Factory 93mm ALOX w/ scissors!!!!! [UPDATE]
-
- The 2017 announcement will probably be the death knell for the 84mm line to remove duplication/competition with the Delemont line
This is not part of the discussion on this thread. But why should Victorinox start a facebook poll about the tools to use in the 84 mm series if they want to quit this line?
More OT!!
- And this is as good a place as any to discuss it - Although mods please feel free to create a new topic
Just what I was going to say strmliner
It's going to be the complete integration of the Wenger/Delemont lines into the Vic catalogue.
What they did this year was not much more than a rebadge.The 84/85mm lines cannot co-exist - This is one of the reasons they merged the brands - Too much overlap
And this is exactly why they are running the poll - To see what tools to keep on the 84/85.And the big question is - Which will be retired? - The 84 or 85 frame? ???
And what else will happen? :oHere's my guess/hope ....
-
The Rangers will stay
-
I hope the Wengers 85 is the frame that wins - Just to keep more Wenger alive !!
-
Maybe the more unusual SAKs like the nail clip and the cigar cutter will stay
-
I think they will standardise on one scissor design across the range - And I think it will be Vic
-
I think they will standardise on one design for all 'overlapping' tools across the range
-
I hope they keep the 85mm blade lock
-
I hope they put the Wengers SD lock on all 8x and 91 mm models - This is a great feature
One question folks: I can't remember - I know the new Delemont scales don't overalap the liner any more - But did they keep the Wenger attachment method??
-
- The 2017 announcement will probably be the death knell for the 84mm line to remove duplication/competition with the Delemont line
This is not part of the discussion on this thread. But why should Victorinox start a facebook poll about the tools to use in the 84 mm series if they want to quit this line?
More OT!!
- And this is as good a place as any to discuss it - Although mods please feel free to create a new topic
Just what I was going to say strmliner
It's going to be the complete integration of the Wenger/Delemont lines into the Vic catalogue.
What they did this year was not much more than a rebadge.The 84/85mm lines cannot co-exist - This is one of the reasons they merged the brands - Too much overlap
And this is exactly why they are running the poll - To see what tools to keep on the 84/85.And the big question is - Which will be retired? - The 84 or 85 frame? ???
And what else will happen? :oHere's my guess/hope ....
- The Rangers will stay
- I hope the Wengers 85 is the frame that wins - Just to keep more Wenger alive !!
- Maybe the more unusual SAKs like the nail clip and the cigar cutter will stay
- I think they will standardise on one scissor design across the range - And I think it will be Vic
- I think they will standardise on one design for all 'overlapping' tools across the range
- I hope they keep the 85mm blade lock
- I hope they put the Wengers SD lock on all 8x and 91 mm models - This is a great feature
One question folks: I can't remember - I know the new Delemont scales don't overalap the liner any more - But did they keep the Wenger attachment method??
I really hope you are correct, and that Vic decides to keep the 85mm line over the 84mm line. Vics 84mm line has been stagnant for a long time, and only has a couple models left that are currently produced (Small Tinker and Recruit is all, i think). Vic still has all the molds and machines for the 85mm stuff, so it doesn't make a lot of sense to throw them all out just to rid the world of Wenger.
For the scissors I would actually be very happy with a hybrid of wenger and vic scissors. Vic Scissors with the Wenger torsion bar instead of the silly little vic spring. if they took the large single backspring and split it down the middle into seperate backsprings for the torsion bar and scissors, the scissors would not move either (although it may affect snappiness, so this may not be viable). Just an idea.
I just hope they keep the nail file, and the Wenger blade. Everything else can go (as long as there are scissors available too).
-
- The 2017 announcement will probably be the death knell for the 84mm line to remove duplication/competition with the Delemont line
This is not part of the discussion on this thread. But why should Victorinox start a facebook poll about the tools to use in the 84 mm series if they want to quit this line?
More OT!!
- And this is as good a place as any to discuss it - Although mods please feel free to create a new topic
Just what I was going to say strmliner
It's going to be the complete integration of the Wenger/Delemont lines into the Vic catalogue.
What they did this year was not much more than a rebadge.The 84/85mm lines cannot co-exist - This is one of the reasons they merged the brands - Too much overlap
And this is exactly why they are running the poll - To see what tools to keep on the 84/85.And the big question is - Which will be retired? - The 84 or 85 frame? ???
And what else will happen? :oHere's my guess/hope ....
- The Rangers will stay
- I hope the Wengers 85 is the frame that wins - Just to keep more Wenger alive !!
- Maybe the more unusual SAKs like the nail clip and the cigar cutter will stay
- I think they will standardise on one scissor design across the range - And I think it will be Vic
- I think they will standardise on one design for all 'overlapping' tools across the range
- I hope they keep the 85mm blade lock
- I hope they put the Wengers SD lock on all 8x and 91 mm models - This is a great feature
One question folks: I can't remember - I know the new Delemont scales don't overalap the liner any more - But did they keep the Wenger attachment method??
I really hope you are correct, and that Vic decides to keep the 85mm line over the 84mm line. Vics 84mm line has been stagnant for a long time, and only has a couple models left that are currently produced (Small Tinker and Recruit is all, i think). Vic still has all the molds and machines for the 85mm stuff, so it doesn't make a lot of sense to throw them all out just to rid the world of Wenger.
For the scissors I would actually be very happy with a hybrid of wenger and vic scissors. Vic Scissors with the Wenger torsion bar instead of the silly little vic spring. if they took the large single backspring and split it down the middle into seperate backsprings for the torsion bar and scissors, the scissors would not move either (although it may affect snappiness, so this may not be viable). Just an idea.
I just hope they keep the nail file, and the Wenger blade. Everything else can go (as long as there are scissors available too).
The latest Vic model to come out (re-release though) is 84mm so I doubt they are getting rid of the entire 84mm line.
-
I really like this dialogue! Good stuff, Team! :D
If Vic is monitoring, more power to them...there is a lot of good input in our SAK threads for them to work with...even if we are the gearheads.
I'm way ok with any decision to eliminate the 84mm llne. The 85mm Delemont line works for me; especially if Vic got rid of the Evo scales (or just offered them as an option). As for scissors, the Delemont scissors are just fine; just get rid of the serrations...they're not needed.
There are already options in the 85mm Delemont line that we like and woud use, especially now that the Delemonts have the Vic T&Ts and can opener...now just lose the Evo scales and we're good to go!!

Now it's time to turn our attention to options in the 85mm and 91mm lines. If users have more options in their knives, our collectors and modders have more to work with...right?
Welcome to 2016 and let's hope somebody is listening and paying attention!
And let's hope that 93mm with scissors comes sooner than later! 
-
Looking better, end of February!

-
-
Maybe I was too quick in posting that. Is that the European release date, and will this be like the last special editions and the US will see them 6 months or so later? :(
-
And now we know the name too, Pioneer X!
X for Xciting, Xcellent, or Xceedingly long wait? :DI'm a little disappointed it doesn't get a proper name.
-
SwissTool X has scissors, Spirit X has scissors, so why not call it Pioneer X :P
-
OK, who bumped the propaganda thread again?

I was trying to get some sleep...
-
Ok who in Switzerland wants to grab a bunch on release day and sell to those of us drooling to take one apart... :D
-
I'm in for a group buy!
-
I am in for the "buy lots from Europe and sell it on eBay for 5 times the price to impatient/rich foreigners"
who is with me?

-
I'm up for some group buys :)

-
There is nothing to buy, it's a publicity stunt. :P
-
Patience, we'll see ...

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
