MUT
-
@Fortytwo said:
Has anyone tried putting the Victorinox Cybertool driver in the place of the punch? They seem to be around the same size.I've always thought it would be cool to remove the punch and the plastic bit that separates the punch and the long bit holder, and then to stack the SAK metal file and scissors and put them in place of the punch. But I'm dubious that the tang on the SAK tools would be big enough. Can anyone compare the SAK tang size and hole diameter to the punch/scrapper?
-
I have recently bought MUT. what a DISSAPOINTMENT. i have a lot of LM tools and it looks like this the last LM i will ever buy. First - you can open it with ease, but it is nearly impossible to fold it back. The screw on the knife blade is smaller than it should be, co it wont overlapse liner lock. Therefore the blade is insecure, just light tap on the table will close it. But it can happen, it might be just one bad Mut. BUT they have changed the pocket clip - it is no more made from Titanium. It is steel with PLASTIC base attached to the body. so definately much less sturdy design. No mention about it nowhere on LM site... :(
-
@ventrix said:
I have recently bought MUT. what a DISSAPOINTMENT. i have a lot of LM tools and it looks like this the last LM i will ever buy. First - you can open it with ease, but it is nearly impossible to fold it back. The screw on the knife blade is smaller than it should be, co it wont overlapse liner lock. Therefore the blade is insecure, just light tap on the table will close it. But it can happen, it might be just one bad Mut. BUT they have changed the pocket clip - it is no more made from Titanium. It is steel with PLASTIC base attached to the body. so definately much less sturdy design. No mention about it nowhere on LM site... :(It appears you ended up with a MUT which slipped thru the hit-and-miss LM QC process of recent times, again. >:(
Don't let this unfortunate episode put you off future LM multitool purchases - send it back for replacement or ask for a refund.LM MUT is a fantastic tool, so loaded with multi-tool technological innovations and plethora of design features you won't find on any other MT out there these days, I can guarantee you that. One has to own and use it for some time to discover and 'learn' this tool's capabilities and applications not necessarily obvious to its new owner, straight up.
The pocket clip change is simply one of those unfortunate decisions LM sometimes makes which tend to confuse the MT aficionados and members of collector community alike. It is simply a cheap-a$$ stamped steel plate replica of the original skeletonized clip made of Titanium. Someone on this forum already posted photo of it few weeks back, it's nowhere even close to the original. My guess is this was done simply to keep the production cost down.
They also seem to have replaced the fine-tooth pliers head with the coarse-tooth one. I personally prefer the fine tooth pliers for an odd situation where precision work is required, but that's just me.
As for the 'small screw' on knife blade issue, you lost me a bit there...could it be another design change of late? Care to post a photo or few?
Keep the chin up! ;)
-
I recently set a MUT in to LM for a bit of adjustment, hopefully they just do what needs doing, and I don't get back a newer, dud one.
I'll keep y'all updated, and you might get pics if relevant.
-
G'Day,
Sorry to hear you may have a dud. I had two that were replace under warranty. As babola said, hang in, it is a very good tool once you get it sorted.
As for the clip, my last replacement one also has the cheap clip. "Leatherman, what were you thinking?!!!" You can get the Ti clips on the interweb and reasonable prices. I have a spare one just in-case.
Cheers,
Pete
-
Here are the pics of the liner lock and my "small screw" problem :)
See, what i mean? The guy from LM said, that it is not problem with screw, but it is defect in liner lock.
Well, i dont know, but it seems to me, that the wide part of the screw should overlapse the liner lock, so it will stop. And the screw looks exactly like one on my Surge.. :) "Locked" blade is very insecure for now, i wouldnt stab it into wood for example, because it will close very easy. Just light tap on the table and it fold.. -
It seems like you have a liner lock sticking up too high. That very screw on my MUT does overlap the lock, but the lock does not touch the bottom of the screw once the blade is deployed. That screw on your MUT is indeed small. Mine's diameter is the same as the width of the blade where it holds. Mine is also smooth on the disc surface without grooves/ serrations as yours.
-
@ventrix said:
Here are the pics of the liner lock and my "small screw" problem :)See, what i mean? The guy from LM said, that it is not problem with screw, but it is defect in liner lock.
Well, i dont know, but it seems to me, that the wide part of the screw should overlapse the liner lock, so it will stop. And the screw looks exactly like one on my Surge.. :) "Locked" blade is very insecure for now, i wouldnt stab it into wood for example, because it will close very easy. Just light tap on the table and it fold..I now see what you mean, thanks. Yes, there's an issue with either liner lock being too long or base of the blade being too 'deep'. Strange this had passed LM QC as one of the tests I know for sure they do before the tool is boxed in retail packaging is deploying all the main blades and checking if they lock properly. >:(
That screw, as you pointed out is indeed from LM BO Surge, not only it's smaller than MUT main blade screw, it's also a different design with knurling on the slope edges - it only comes on Surge, no other LM MT sports them. Well, not until now at least. It appears as the assembler simply reached for the wrong screw box or the Surge screw somehow made it to the MUT box, who really knows.
I'd send it back and ask for a replacement. Simply too many issues for a new tool, you shouldn't have to live with that or having to fix it yourself.
Any photo of that new steel pocket clip? I heard there's also a plastic insert at the bottom point the clip attaches to the base of the handle? What's up with that? ::)
-
Yeah, you are right. It should go back to replacement. But I am in central europe and the MUT is from ebay, from australia. Maybe i will try my local dealer.. And i am also a bit sentimental about it, he made it from USA to Australia and then to Europe, just to become my mate :D
Here are the pics of the new clip... I particularly don`t like the plastic part. It looks odd and unfinished, as you may see in the last pic.
I find it unfair, to change the clip like this without letting anyone know. That is not right think to do, i suppose. -
I vote send it back.
@Tooltime said:
So I sent Leatherman an email about the clip and here is the response I received:Thank you for contacting Leatherman Tool Group, Inc.
In February (possibly early March) we made a running change to the Mut pocket clips, and now make them from 420HC steel instead of the Titanium.
The reason for the change was due to the costs of the Titanium used for it were rising substantially.
Best Regards,
Cameron Hansing
Customer Service
Leatherman Tool Group, Inc.
Leatherman / LED LENSERI don't think they passed any cost savings on to the consumer.
-
And the value of the original MUT with the Ti clip has just gone up... ;)
Sorry but that stamped-steel clip sitting on top of the PVC base is a poor excuse for replacement of the original.
If you're not keen to send it back at least make sure you pick one of the $12 original MUT Ti clips from ebay or elsewhere while still available.
Cheers.
-
Aww hell.
If they replace my MUT with that, I'mma be having words.
Are their any other known changes? (yes, I know there is a MUT variation thread. I'll go there in a moment, calm down)
I hope they just repair the one I sent in.
-
@Sea Monster said:
Aww hell.If they replace my MUT with that, I'mma be having words.
Are their any other known changes? (yes, I know there is a MUT variation thread. I'll go there in a moment, calm down)
I hope they just repair the one I sent in.
I wouldn't worry if I were you. Repair of a MT is one thing, unnecessary replacing its clip with a substandard one is another. Your MUT should come back with the same clip. Unless they decide the tool is a write-off for some reason and they decide to replace it outright.
The only changes I know of are new pliers head with coarse teeth and the stamped steel clip. The Surge screw shown in this thread should be an anomaly. It doesn't belong to MUT, neither by its size nor design.
-
Ideally I won't have to send it in again :-\
-
I got it back today (Longest wait I've ever had on LM Warranty)
and....They didn't replace the parts like I had hoped/asked - just got a NIB replacement - with the new clip.
The head seems broader/different too? I'm not sure, I've been using other tools in the interim, so maybe it's just I've forgotten what it was like.
I'm a bit disappointed, I didn't want the new clip / any other changes they made, and also I'm sure the world would be a better place if they just replaced the bits that needed doing.
The user guide still says Titanium
The handles are stamped 2014.I took it into a store to discuss the "issue" and was met with "Oh, if they had of changed it they would have told us" and "no no, you only have the Regulation (??) MUT, the EOD one has the titanium", along with general shrugging, half hearted "oh interestings" and other non committal jedi mind tricks that retail folk use when they clearly have more interesting things to do that deal with the raving lunatic who wants to talk about 3mm plastic spacers and other inane minute details.
I'm sure a lot of people "prefer" just getting a brand new shiny one.
Anyway, true to previous comments, the new clip seems stiffer than the old one, I could barely get it over my jeans pocket.
Without my original one to compare to, I can't give much useful feedback.
-
@Sea Monster said:
Anyway, true to previous comments, the new clip seems stiffer than the old one, I could barely get it over my jeans pocket.Without my original one to compare to, I can't give much useful feedback.
If the SS clip is too stiff for you, you would not like the Ti clip. The Ti clip is subtaintially thicker and very stiff. But as others have rightfully pointed out, the Ti clip is of higher value and is aestthetically better looking on the MUT. I am still in the look out for a new SS MUT with a Ti clip. Unfortunately, the clip does not show with the tool in sealed package.
-
If the SS clip is too stiff for you, you would not like the Ti clip. The Ti clip is subtaintially thicker and very stiff. But as others have rightfully pointed out, the Ti clip is of higher value and is aestthetically better looking on the MUT. I am still in the look out for a new SS MUT with a Ti clip. Unfortunately, the clip does not show with the tool in sealed package.
I had less trouble with the TI clip,
I'm not in a position to put a tension guage on them at this point.
There could be other design factors, such as the TI one having a larger smoother "contact" point on the clip end, and the steel one only having the thin web...I'm just spitballing at this point, it is early here.
The handle-lock is also much looser on the new one (could be individual variation) - my older one locked in hard, and you had to want to unlock it, the new one kinda just sits there with the barest interference, it doesn't "fall" unlocked, but it doesn't take much.
-
@ ventrix , Sorry to hear about the MUT issues. It would have been great for LM to let us know about the clip changes but you know how it goes. Also I was thinking that since the tool came from fleabay its quite possible that the tool was fooled with. I'm certainly not saying LM hasn't had royal flubs. It is possible that the prior owner made some "adjustments"
.In any case LM will certainly sort this out tho I imagine being in Europe makes the process a PITA.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login