OPINELS
-
@Aloha007 said:
I have seen both knives but have yet to acquire either. I love using my Opinel in the kitchen. I have much "better" knives but it gives me a big smile especially as the blade darkens.I mention the Svord because the design makes it very easy to take apart and completely clean everything if you want. It's literally just two flathead screws. The Svord blades will patina with use as well. You can't go wrong with either the Opinel or Svord.

-
@captain spaulding said:
I have seen both knives but have yet to acquire either. I love using my Opinel in the kitchen. I have much "better" knives but it gives me a big smile especially as the blade darkens.
I mention the Svord because the design makes it very easy to take apart and completely clean everything if you want. It's literally just two flathead screws. The Svord blades will patina with use as well. You can't go wrong with either the Opinel or Svord.

+1 - The Peasant has an excellent carbon blade.
-
I really need to do something to loosen my blade. It's to the point where it's so difficult to get opened and closed, I'm fearful that I'll slip and slice my hand open.
Sent from my XT1254 using Tapatalk
-
Hey Th-nizzle, depending on the reasons why you think it is stiff to open, try leaving it somewhere warm and dry to see if the wood has expanded with moisture, or gently pry the slot at the pivot end with the blade closed in case the collar is a little tight. You might also oil it a bit with some mineral oil, see if that works.
If none of the above solves the problem you could remove the collars and widen the pivot slot with some sand paper.
Mine varies with ease of opening and I think it has a lot to do with moisture content; my hands sweat profusely, but the blade is never too stiff to open.
Hope this helps and best of luck

-
Thanks. I'll give it a try.
Sent from my XT1254 using Tapatalk
-
I recently bought two Opinels and surprisingly enough have been disappointed with both.
-
@captain spaulding said:
I recently bought two Opinels and surprisingly enough have been disappointed with both.
I thought you liked them Cappy?
I like my old Opinel. The new ones I bought...... Not so much.
-
@captain spaulding said:
@captain spaulding said:
I recently bought two Opinels and surprisingly enough have been disappointed with both.
I thought you liked them Cappy?
I like my old Opinel. The new ones I bought...... Not so much.
I see.
Have nothing to compare since it is my first but the one I just got seems well made and easy to operate. The sharpening job needed a lot of work but that is something I do to all my knives anyways.
-
@captain spaulding said:
@captain spaulding said:
I recently bought two Opinels and surprisingly enough have been disappointed with both.
I thought you liked them Cappy?
I like my old Opinel. The new ones I bought...... Not so much.
What differences from the original have disappointed you? Apologies if you've already given the answer elsewhere and I've missed it

-
@50ft-trad said:
@captain spaulding said:
@captain spaulding said:
I recently bought two Opinels and surprisingly enough have been disappointed with both.
I thought you liked them Cappy?
I like my old Opinel. The new ones I bought...... Not so much.
What differences from the original have disappointed you? Apologies if you've already given the answer elsewhere and I've missed it

This is the first I mentioned it. I was going to start a thread about it, but will just tell you quickly. Basically the first new Opinel I bought has a loose collar "lock" and every time I close the collar behind the blade to lock it open it makes this weird metallic clicking noise where the collar contacts the underside of the blade. Something is not right. The lock is bad at best. Compared to my old Opinel the angle and depth of the cutout in the collar are slightly different, but it makes all the difference as on the newer models the collar does not spin as far giving it a better lockup.
The second new Opinel I bought is a garden model. The lock on that one is so loose it almost moves freely. I would never trust the lock and may just remove it, it's so bad. The blade on this one is sharpened poorly at the tip. It is very dull at the tip and slightly deformed like someone messed it up while sharpening at the factory.
I took the collar off on the first Opinel and tried to bend it, but it did not help. I will do the same with the garden model.
-
Thanks for the explainations, and good luck with the remedial work

-
I am having a similar discussion regarding consistency in another thread.. :D You should not be expected to put up with issues, or fix them when new.
Despite the low cost of opinel you should expect a reasonable knife each time.I always buy my regular opinels from a shop, after checking through several to find the best. Having handled a few hundred this way, their quality varies a lot. Their main issue is the lock/stiffness.
Usually the packaged models and the plastic ones are a lot more consistent, making me think that there is an extra QC step included in their production/packaging.
-
Glad I got lucky with my first one then.
Could not imagine wanting more or less tension.
-
@captain spaulding said:
@50ft-trad said:
Thanks for the explainations, and good luck with the remedial work

I don't know how you use the word remedial around there, but around here that would be a insult.

Oh.....
...... well whatever the interpretation is over there, that's not how I meant itRemedial as in remedy, solution to a problem.
Basically, good luck in putting the knife right
-
@50ft-trad said:
@captain spaulding said:
@50ft-trad said:
Thanks for the explainations, and good luck with the remedial work

I don't know how you use the word remedial around there, but around here that would be a insult.

Oh.....
...... well whatever the interpretation is over there, that's not how I meant itRemedial as in remedy, solution to a problem.
Basically, good luck in putting the knife right
Never heard of remedial being an insult. Like you said, it's just a remedy.
-
@50ft-trad said:
@captain spaulding said:
@50ft-trad said:
Thanks for the explainations, and good luck with the remedial work

I don't know how you use the word remedial around there, but around here that would be a insult.

Oh.....
...... well whatever the interpretation is over there, that's not how I meant itRemedial as in remedy, solution to a problem.
Basically, good luck in putting the knife right
Never heard of remedial being an insult. Like you said, it's just a remedy.
Not sure what the Capt meant
. Im my neck of the woods it means what 50 said, solution to a problem.In any case good luck Capt on a solution if thats the road you'll take. I'm with DKS tho and a return is in order. Its a bummer you got a couple of duds. My last Opinel I got has a loose collar but only after I took it off to mod it. It's easily bendable so making it snugger is not an issue.
-
@50ft-trad said:
@captain spaulding said:
@50ft-trad said:
Thanks for the explainations, and good luck with the remedial work

I don't know how you use the word remedial around there, but around here that would be a insult.

Oh.....
...... well whatever the interpretation is over there, that's not how I meant itRemedial as in remedy, solution to a problem.
Basically, good luck in putting the knife right
Never heard of remedial being an insult. Like you said, it's just a remedy.
Me neither but after googling it apparently it's urban slang for stupid
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
