Side cutter multitool
-
I'd rather use nailclippers to cut zip ties any day than risk bending my scissors.
-
A quality 5" or 6" pair of diagonal cutters is often a daily compliment to my SOG PPP. When I was using them heavily all day installing Christmas lights I carried an 8" Klein pair in a leather holster.
For zip ties, the Klein D275-5 is nice. It cuts flush so there is nothing to snag and cut your hand, and they cost under $10. Also its small enough that it might be modifiable to fit inside the PPP frame.


-
Leatherman make great multitools but they don't seem to understand that brand name pliers have side cutters not scissor cutters because you can cut and strip small and large cable with a side cutter but not with a scissor cutters which blunt easily and mangle wires.
I have been using a Charge for years now and have found that they are so inadequate with electronic size wires that I often carried a pair of mini Klein side cutters in my jacket pocket. But it is mid summer here right now so I have been caught out a few times without my jacket.
Cutting things like cable ties holding a bundle of wires is really hard work with the Charge. What I have done in the past is to slide the serrated blade under the ties and twist but it is very easy to damage the wires. The other way I have tried is to grab the cable tie in the very tip of the pliers and twist the pliers to break the tie but when I have done a number that way I have accidentally also grabbed a wire as well and damaged the wire.
I decided to make up something that would fit in my Charge pouch and came up with a nice solution.
Most side cutters have handles that when closed are too wide to fit in the pouch but I found that the Lindstom pliers fit great when you remove the plastic off the handles and grind a bit off the handle length. Lindstrom are expensive ($75) tools but I bought a number of these off an Ebay seller amarah.1 for only $13 each. He lists them as used but they were brand new - I suspect they are factory seconds but great value. He still sells them.
See the photos
1 Charge, a pair of Lindstrom RX8150 side cutters before and after stripping off plastic and grinding 20mm from the handles
-
Close up of the side cutters. I put them in heated boiled linseed oil to prevent them rusting. This is an old fashioned way to stop tool steel rusting
-
The side cutters in my Charge pouch
-
The side cutters in use. I have even cut house wiring, fine wires, cable ties, dyneema fishing line




-
-
That looks like a good solution.
-
Easiest might be a Gerber MP-600 / Excalibur mod

-
Nice idea Peter. Welcome to the forum.

-
@Etherealicer said:
Easiest might be a Gerber MP-600 / Excalibur modWhile I love my version of that mod, the shears are better suited for gardening work than electrical cable cutting. I dont see those shears holding up to anything more substantial than speaker cable
-
Pleased to be of help. I chopped a bit much off the handles on my first attempt and they dropped down too low in the pocket and were not quick to get out. I tried a second one with the full original length but that is a bit too long and the tips poked out the bottom of the pouch when it was closed. A good length is to chop about 10mm off each handle.
Let me know how yours goes.
-
I've been carrying a Spirit lately and there isn't any spare room in the sheath. I may have to switch back to my normal Juice and make a new sheath for it.
-
I have most of the Leatherman multi tools and have carried many of them on a daily basis but I keep going back to the Charge even to the point that if my wife tells me to leave it behind because the occasion is too dressy for "that ugly thing" then I leave the pouch at home and use the pocket clip - just in case! I am amazed at how many times each day I use it. Probably the most commonly used tool is the serrated blade that is great for opening parcels and boxes at work,
Maybe it is time for you to try a Charge.
-
My main uses are Phillips screwdriver for computer cases, pliers for jammed or stuck video cable screws or retightening loose stand offs, opening boxes and packages. A minimalist tool like the Juice S2 works for me. The cutters add a function that I wanted for cutting cable ties.
-
If you carry a multitool in your pocket then the smaller the better but from my experience if you carry a multitool on a belt pouch it doesn't make much difference whether it is a small tool or a larger one.
I have tried both methods and even a small tool carried in a pocket often does not sit nicely so I prefer a belt pouch or a pocket clip.
If you treated yourself to a Charge you would never go back to a mini tool. It is the most expensive multitool Leatherman makes for a good reason.
Besides being a tool nut I am a bit of a flashlight nut as well. I currently carry an Olight i3S AAA flashlight in one side of the pouch. It is great for working in the dark behind a computer and will clip on my glasses or a cap. In the other side I carry a Fisher bullet pen. Now with the addition of my side cutters I have an EDC kit that is really small and does most of what I need. I am an electronic engineer who mostly works in an office but I also do field testing of new products on farms and vineyards.

-
Sorry newbie here. The message and photo got sent again by mistake. I figured out how to delete the photo but not the whole message.
-
Still lurk here now and then but have not posted in a long time. Interesting to see this thread bumped.
I've been using a pair of toenail clippers in the meantime, but those Lindstrom cutters look very nice. Going to ebay a pair right away and give them a try. Will likely do as Peter has and remove the plastic handles and trim them down some.
Also have a Maratac AAA flashlight on my keychain - probably my single most used piece of EDC by far.
Thanks for the suggestions folks!
-
So this thread renewed my curiosity and after looking around on the interwebz.....I think I might just get myself one of these.
http://www.gerbergear.com/Activity/Work/Cable-Dawg-Tool_30-000399
List is pretty pricey but seems there are good deals to be found. Actually even then it is still pretty pricey but it is everything I need.
Anyone have any experience with these?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
