And so it begins.... (My adventures into Alox!)
-
@Syph007 said:
Ok, I will order a piece of brass to get cut for the mag glass holder.Its $100 for a square foot of 0.125" 464 (naval brass, it's harder than cartridge brass and would be better for this purpose) so Ive been reluctant, but im sure there are others who would like to upgrade from the plastic as well.
Awesome. Thank you!
-
Well this is what I get for not being organized... I already had some brass the right thickness for mag glasses. Just 6 sq inches, but thats enough for a bunch of test pieces. Dropping it off tomorrow for waterjet along with another big hunk of Ti for more scales.
The orders for 91mm Ti have really taken off and by far is the most requested mod now, so I need more of those. I'll do up some wrench scales for that size as well as people have requested those. Also I quickly ran out of the backscales with no tool cutout as the number of bladeless mods has been up alot.
I'm also about ready to pull the trigger on a tormach 440. I need to level up my capabilities and be able to offer custom engraving. Blowing 10k at once is scary though but if I dont do it now, I know I will regret it later on. I can then do some precise machining like making Ti scales for 58s with the area milled out for the sliding pen mechanism, which I know will be popular. I have 50 + of those pen things here and I could offer those milled into the 91/93 mm size as well. :D
-
Now that is very interesting, particularly as someone looking for engraving and who appreciates the 58mm pen. Not a practical purchase for one off modders, but with your volume, I could see it adding a lot of flexibility and allowing faster turn around times.
I'm excited to see what you can accomplish with this level of tooling.
-
And this morning's work was a Ti super tinker with copper cross and brass liners. :D




-
There's my precious beast[emoji2]
Technically I have two precious beasts now....thanks Syph[emoji16]Sent from my SM-G920R4 using Tapatalk
Hey Monrogue...just curious....why the fishscaler?
I used to have it on a previous SAK, and once I got a Swisschamp, I realized how much I like it. It's a great back scratcher for those just out of reach spots, which is a frequent use for me. It's a great misc type tool overall IMO[emoji106]
Sent from my SM-G920R4 using Tapatalk
-
Would it be possible to make 91mm or 93 mm Ti scales with the large pen?
-
@Sakpan74Gr said:
Would it be possible to make 91mm or 93 mm Ti scales with the large pen?Maybe but then an extra liner between the scale and tools would be needed. I might be able to add it in the same spot as i do tweezers now but the oen is very thick and wouldnt leave much scale thickness left.
-
Syph - I know the 91mm opener backspring isn't too flexible, making tools swaps hard. But I don't remeber you ever talking about the blade backspring. Could small blade + combo tool or small blade + can opener fit on the blade backspring?

-
@tommywp said:
Syph - I know the 91mm opener backspring isn't too flexible, making tools swaps hard. But I don't remeber you ever talking about the blade backspring. Could small blade + combo tool or small blade + can opener fit on the blade backspring?

Hmm yes i think that would work. Could even do bottle opener in place of large blade.
-
Brass mag glass holders should be ready next week. Im having another big hunk of Ti cut up as well for 84mm and 91mm scales. I did 2 version of scale wrenches for 91s too. A new design that I will explain when I have them back. It will handle both metric and imperial nuts.
Still some alox modding going on here too... :D




-
What he said ^

-
Yeah, I would be tempted to have that done to my OC Pioneer, minus the clip. Very nice[emoji106]
Sent from my SM-G920R4 using Tapatalk
-
Very nice, likes like a factory job
-
@Syph007 said:
Brass mag glass holders should be ready next week. Im having another big hunk of Ti cut up as well for 84mm and 91mm scales. I did 2 version of scale wrenches for 91s too. A new design that I will explain when I have them back. It will handle both metric and imperial nuts.Still some alox modding going on here too... :D




Now we're talking!!!!!!
-
^ LOL !
-
Ok this is definitely the thinnest alox mod Ive ever done.
Alox swiss army file.




The only challenge part here was to get a keyring on there. I milled off 0.040" in the shape of the keyring part and riveted it to the spring.

-
Not sure about the point of a file-only SAK, but it definitely looks great !
-
@m47mu74nt said:
Not sure about the point of a file-only SAK, but it definitely looks great !Customer wanted it, so I built it. :D Not sure exactly why he only wanted the file. Maybe its the prison escape model.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login