The SwissTool owners club
-
I highly regret spending $50 for a new LM Skeletool with Christmas money, when I could (and should) have gotten a used SwissTool for the exact same price or a little less. The SwissTool seems even heavier duty and better built than the LM Super Tools. The Skeletool, on the other hand, has some of the wimpiest pliers I've seen on a full-sized multitool. Mine's went into the closet in the collection box, and I'm back to using my nearly 20 year old LM PSTII. The Skeletool is meant for those who probably won't be using them for farm work or anything else that requires a lot of force for that matter, while the SwissTool is made for darn near everything I can throw at it. Plus, the Swiss Tool has pretty much everything I need--not just a blade, pliers, and a couple flat bits that are nowhere near as good as the fold out drivers or regular, 1/4 bits.
-
I have a 95 Supertool and wondered how the Swisstool compared. I've been a lifelong Vic user and have always been intrigued by the Swisstool, but haven't had the spare cash lying around to pick one up. I'm gonna make the plunge one of these days!
-
I don't say which is better but on my opinion swiss tool (spirit) is one of the best tools I have used. And big plus that there is a good sheath with own compartments to plus set.
-
@Barry Rowland said:
I have a 95 Supertool and wondered how the Swisstool compared. I've been a lifelong Vic user and have always been intrigued by the Swisstool, but haven't had the spare cash lying around to pick one up. I'm gonna make the plunge one of these days!The Swisstool is one of my favorites. Terrific tool set and love the blunt-ish pliers. Have a look around the auction site often as you can pick one up reasonably.
-
I'm hoping to pick one up from there soon. My son and I were just talking about it last night. Neither one of us has ever seen one in person, but hope to remedy that soon!
-
@Barry Rowland said:
I'm hoping to pick one up from there soon. My son and I were just talking about it last night. Neither one of us has ever seen one in person, but hope to remedy that soon!I have one in my truck that I'd be happy to send your way to "test drive"? Have a play and see if in fact you like it then send it back after you've had your way with it
. Its a hard working tool and IMO should be in everyones collection but this way theirs no cost incurred to you.PM me and I'll shoot it out ASAP
-
Bless you! I can hardly wait to even lay hands on one....I've lusted after one of these guys for a loooong time! PM Sent.
@Barry Rowland said:
I'm hoping to pick one up from there soon. My son and I were just talking about it last night. Neither one of us has ever seen one in person, but hope to remedy that soon!
I have one in my truck that I'd be happy to send your way to "test drive"? Have a play and see if in fact you like it then send it back after you've had your way with it
. Its a hard working tool and IMO should be in everyones collection but this way theirs no cost incurred to you.PM me and I'll shoot it out ASAP
-
@Barry Rowland said:
Bless you! I can hardly wait to even lay hands on one....I've lusted after one of these guys for a loooong time! PM Sent.@Barry Rowland said:
I'm hoping to pick one up from there soon. My son and I were just talking about it last night. Neither one of us has ever seen one in person, but hope to remedy that soon!
I have one in my truck that I'd be happy to send your way to "test drive"? Have a play and see if in fact you like it then send it back after you've had your way with it
. Its a hard working tool and IMO should be in everyones collection but this way theirs no cost incurred to you.PM me and I'll shoot it out ASAP
Very cool of you Aloha

I look forward to your thoughts on it Barry.Sent from my SM-G920R4 using Tapatalk
-
@Barry Rowland said:
Bless you! I can hardly wait to even lay hands on one....I've lusted after one of these guys for a loooong time! PM Sent.
@Barry Rowland said:
I'm hoping to pick one up from there soon. My son and I were just talking about it last night. Neither one of us has ever seen one in person, but hope to remedy that soon!
I have one in my truck that I'd be happy to send your way to "test drive"? Have a play and see if in fact you like it then send it back after you've had your way with it
. Its a hard working tool and IMO should be in everyones collection but this way theirs no cost incurred to you.PM me and I'll shoot it out ASAP
Very cool of you Aloha

I look forward to your thoughts on it Barry.Sent from my SM-G920R4 using Tapatalk
+1

-
@Barry Rowland said:
Bless you! I can hardly wait to even lay hands on one....I've lusted after one of these guys for a loooong time! PM Sent.@Barry Rowland said:
I'm hoping to pick one up from there soon. My son and I were just talking about it last night. Neither one of us has ever seen one in person, but hope to remedy that soon!
I have one in my truck that I'd be happy to send your way to "test drive"? Have a play and see if in fact you like it then send it back after you've had your way with it
. Its a hard working tool and IMO should be in everyones collection but this way theirs no cost incurred to you.PM me and I'll shoot it out ASAP
Great. I think you'll dig it. I sent you a PM as well. My pleasure to spread the
addictionhobby
. -
@SAK Guy said:
My pouch is here....waiting on the bit set.Sooooo, when you buy the bit set with six bits, how do you get the rest of the bits for the holder....buy the bike tool?
Normal size bits. You can buy separately, buy some screw driver using bits (often have wide set of bits included). Hardware stores and big markets usually have wide selection. I actually use 4 included bits and others replaced. So having 4 hex and 6 torx at the moment. Example:

(this for electric screw driver / drill. Set costs from under ten upwards). -
My pouch is here....waiting on the bit set.
Sooooo, when you buy the bit set with six bits, how do you get the rest of the bits for the holder....buy the bike tool?
Normal size bits. You can buy separately, buy some screw driver using bits (often have wide set of bits included). Hardware stores and big markets usually have wide selection. I actually use 4 included bits and others replaced. So having 4 hex and 6 torx at the moment. Example:

(this for electric screw driver / drill. Set costs from under ten upwards).Thanks Temo!!!

I was thinking it was a special bit size like the cyber tool!

I have those type bits with my screw gun.....

-
My pouch is here....waiting on the bit set.
Sooooo, when you buy the bit set with six bits, how do you get the rest of the bits for the holder....buy the bike tool?
Normal size bits. You can buy separately, buy some screw driver using bits (often have wide set of bits included). Hardware stores and big markets usually have wide selection. I actually use 4 included bits and others replaced. So having 4 hex and 6 torx at the moment. Example:

(this for electric screw driver / drill. Set costs from under ten upwards).Thanks Temo!!!

I was thinking it was a special bit size like the cyber tool!

I have those type bits with my screw gun.....

A good kit SG, I have the bits and ratchet in my small tool bag that goes from whatever vehicle/machine that I'm on at any given time. I also have a set of driver bits which effectively turns the kit into a small socket set. The LM bit extender accepts the standard 1/4" drive bits also.


-
Some sort of driver belt is what I need :) Would go with vic plus and with LM adapter. Maybe should look some ammo belt where use bits instead ammo. Bits are not large but good carry option (with MT) is harder to find. Maybe I am just too picky with carry items.
-
My pouch is here....waiting on the bit set.
Sooooo, when you buy the bit set with six bits, how do you get the rest of the bits for the holder....buy the bike tool?
Normal size bits. You can buy separately, buy some screw driver using bits (often have wide set of bits included). Hardware stores and big markets usually have wide selection. I actually use 4 included bits and others replaced. So having 4 hex and 6 torx at the moment. Example:

(this for electric screw driver / drill. Set costs from under ten upwards).Thanks Temo!!!

I was thinking it was a special bit size like the cyber tool!

I have those type bits with my screw gun.....

A good kit SG, I have the bits and ratchet in my small tool bag that goes from whatever vehicle/machine that I'm on at any given time. I also have a set of driver bits which effectively turns the kit into a small socket set. The LM bit extender accepts the standard 1/4" drive bits also.

Great idea...thanks for the info T!!! 
-
Got it together....now, looking at extra bits!!


-
Congrats SG. There are so many options for bits and sockets that will suit the Vic L wrench. The hard part will be how to carry all those options :D.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
