Going Buck Wild.
-
I was fortunate to win this Buck and it arrived today.Prices vary wildly for these David Yellowhorse knives.Some collectors have these listed on their sites for as much as $495.00.If you can buy these for under $300.00 you will have purchased a true gem.
Good Luck.
-
The walnut handle on a S30V blade would be pretty drool.

-
Toolguy is rapidly building a really sweet Buck collection indeed!
Cornering the market on them!

-
Bull Riding Buck 8)
-
@toolguy said:
Here are two more that arrived today.These are Buck 110's and the distinguishing feature of both of these knives is the non-standard handle material.One has oak dymondwood and the other has hunter green dymondwood. The hunter green is numbered because this color is limited to 100 knives of total production.
I love that one in green.

-
@zoidberg said:
The walnut handle on a S30V blade would be pretty drool.
The boning knife is 154CM.I have a few customs with this steel and I've never found issues with it.
@Joe58 said:
Toolguy is rapidly building a really sweet Buck collection indeed!
Cornering the market on them!There are more of these Buck knives on the market than you can possibly imagine.Just the 110 Harley series has ten models and three thousand of each model.LOL.
LOL.
Here are two more that arrived today.These are Buck 110's and the distinguishing feature of both of these knives is the non-standard handle material.
One has oak dymondwood and the other has hunter green dymondwood. The hunter green is numbered because this color is limited to 100 knives of total production.I love that one in green.

That green was the least expensive Bucks I've bought recently.Although I bought it on Amazon because I had a $20.00 gift certificate,the same seller also has it listed on ebay.
http://www.ebay.com/itm/Buck-Knives-110-Hunter-Green-Dymondwood-Folding-Hunter-Knife-Exclusive-110GRSSH-/331678194293?hash=item4d398f9a75:g:-zwAAOSwhcJWGTXI -
This is a lesson in patience and setting a limit that's realistic and hopefully saves myself from that dreaded phenomenon known as "buyers remorse".
Since I became aware of a 100 anniversary Buck,I began searching for one.The prices vary on this knife,so as usual I researched the selling prices and reached what I believed to be a reasonable value.I then went on another search to buy this Buck 112 100 Anniversary knife.This was originally packaged in a Buck metal tin with a Buck lapel/hat pin and wrapped in cellophane.
I came across one on ebay that claimed NIB although the package was opened.The seller was asking $99.00 so I offered him what I had determined to be a legitimate price and that was $60.00.Whenever I don't receive a counter offer I assume the seller if offended by my offer.That was no big deal,so I moved on.
I then came across a genuine NIB 100 Anniversary model and offered this seller the same price.He accepted and I received it a few days ago.Now you may think this is the end of a happy buying experience but that wouldn't be correct.Upon removing the original cellophane wrapper and opening the tin I discovered the most beat up new Buck I've run across. Unfortunately I neglected to take pics,as I seem to never think of this before beginning work to restore this knife to new condition.I sanded the nicks and scratches with progressively finer paper and then buffed it to a new finish.
-
This knife is part of Buck's Chip Flint series of knives.The intention was to create a blade that looks similar to the tools men made from flint.Flint was fashioned by ancient societies to make tools such as knives,spears,arrows and other tools needed for cutting.They created these tools by chipping the flint until it formed a sharp edge,hence the name chip flint.
This is Buck's 112 Ranger folding knife.This knife is not only distinguished by its chip flint blade but also for Bucks use of Buffalo horn for the handle and a nickel silver frame.As can be seen,it also has an inlayed buffalo using animal bone.
It really is nicely done and a unique knife as well.
-
Here's a blast from the past.This is Buck 110 Hunter that was made between 1974 and 1980.This makes this knife at least 35 years old.
Buck never marked their knives based upon the year they were manufactured. They did however provide a rudimentary method to determine the range of years.They placed a small dot on each side of the model number and in this case it's a 110.Then in 1980,they instituted a more precise system for stamping their knives to determine the exact year of manufacture.
If you view a newly manufactured Buck 110,you'll notice that the frame [front and rear bolster] have more rounded edges compared to this earlier model,which is more squared.
-
Some nice ones, especially the flint 112 !
-
-
Here is another Buck made Harley Davidson 110 Hunter.As I've mentioned in a previous post there were ten different knives made to commemorate historical benchmarks in Harley Davidson's history.This blade is number V in the series and it celebrates Joe Petrali,a Harley motorcycle racer with extraordinary accomplishments.
Of the ten knives in this series,four of these were made with nickel silver frames,of which this is one and the rest have brass frames.
-
that flint knife is outstanding
-
Here is another Buck that arrived today.It is a model 919 Heavy Skinner.The story behind this particular knife began with Jim Cabela,the family that owns Cabelas,who supply the public with outdoor equipment.Apparently Jim requested Buck build a skinning knife that was compact but very heavy duty.This is the result of his request.
This knife is 7 1/2" long with a 3 3/8" blade which is 1/4" thick.It has a 4 1/8" handle and weighs 165 grams.It's also equipped with black paper stone scales.
Compare this to Buck's 113 skinner,which weighs in at 140 grams which also has a considerably thinner blade.
-
Another outstanding addition bro!!!!!

-
This is the latest addition to my mini collection of Buck knives.This was created by Buck for Harley Davidson in 1984.The one interesting aspect of buying this type of knife is that they're usually not used.Most people consider it a collectable and therefore they only display it.
This knife is rather large.It has a 10" blade and an overall length of 15 1/4".As can be seen,the blade is mirror polished and engraved on both sides.
This knife possess the classic features of a Bowie knife.It has a large clip point blade,a double lugged brass hilt and a coffin shaped handle.
It also comes housed in a red velvet lined walnut display case with the Harley Davidson name and logo carved into the outside lid.
-
Nice ! so you will be doing some batoning with this one :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login