Boker > SAK
-
Now everyone is entitled to their own opinions, but........ I want to punch this guy in the face. Anyways, decide for yourself. I also do not agree with some of his "logic" on a few things I will mention later.
http://www.outsideonline.com/2048236/finally-better-swiss-army-knife
-
@captain spaulding said:
Now everyone is entitled to their own opinions, but........ I want to punch this guy in the face. Anyways, decide for yourself. I also do not agree with some of his "logic" on a few things I will mention later.http://www.outsideonline.com/2048236/**finally-better-swiss-army-knife**
Clearly a knife expert...
*Wes Siler
Author's Bio"Wes Siler run Outside's new outdoors lifestyle blog, IndefinitelyWild. You may recognize him from such websites as Jalopnik, Gizmodo and Hell For Leather, where he used to review cars and motorcycles, and share his various misadventures, outdoors and otherwise. Wes lives in LA with his dog, Wiley."*
SAK = Swiss engineering Swiss made.
Boker Plus = " German engineering, manufactured in Taiwan and China."
https://www.boker.de/us/pocket-knife/boker-plus.htmlBuy a
SwizaBoker because you want/like one not because they're new/improved and hence must be better than the world standard.......
-
I don't have a Boker, so I'm not going to weigh in on this or that, but a few points.
1- The first thing he mentions is the price difference. It seems to me you might as well stop the review there? No one is comparing my Tercel to an M3, and I suppose there's a reason for that (It'd be unfair, the Tercel has more interior space, lower maintenance costs, and better fuel economy.. :D :D :D )
2- For better or worse, it did actually make me want to pick up a Boker Tech tool, they look neat (I'll change my mind when I find out what they cost in Oz)
3- In the same breath he says "You can find this tool from both companies with a variety of tool selections" then "the Boker has a better tool selection"
Well....you picked those models for the review mate, it was up to you to choose as like-for-like as possible...
-
Since I carried a CityTool 3 during the off-brand-challenge
**Blade **is awesome, for me the best MT blade I have handled. I'm in love with that blade.
**Scales **are niceRescue thingy is scary and useless. Useless as a screwdriver because when using it you risk your limbs. Useless as rescue blade because it does not cut well enough.
**Scissors **are good at medium stuff (zip-ties etc) but fail at thin soft stuffOverall, the CityTool is pretty nice. For me if they replace that rescue-thingy with an awl or something, and tweak the scissors a bit, it becomes a true alternative to a SAK. And don't compare it to the Swiza, the Böker is far better than the Swiza.
-
I feel my IQ dropped about 60 points after reading that nuclear waste in the form of an article
-
"Boker uses Sandvik’s 12C27 stainless steel for its knife blade. That’s a harder steel, with a Rockwell value of 58-60, so it retains its razor edge for longer, but it's just as easy to sharpen."
"... and even featuring a named steel for its blade ..."
That's the exact type of simplistic nonsense, generated on a hourly basis, that got me to stop reading one of the large knife forums.
-
One thing we know for sure is this was definitely not a paid advertisement disguised as a review.
;)
-
Just watched a few video reviews of the tool and its neat. I like the blade shape on it and the scales are pretty sweet. Didn't read the article however.
-
Sandvik and Victorinox steels both pretty much fall between 420HC and 440A. Not a lot of difference.
Thought about picking up one of the Bokers for the collection, until I found out the Tech-Tools are made in China. That killed it for me.
-
Did he also just say that Vic uses SS liners?
Victorinox houses its stainless steel tools in stainless steel liners backed by stainless steel springs.
His attitude to the glass-breaker makes me think he's seen a bit to many action-movies.
the glass breaker could save crucial seconds should you ever need to flee a building through locked or otherwise inaccessible doors or windows. Just look around any urban environment and imagine that every piece of glass is now an available exit.
In my world there's also the problem of the Boker not really knowing what it wants to be. Does it want to be the slightly more dressy knife with the wine opener? Or the survival type with line-cutter, G10 and glass breaker? There's a certain measure of mall-ninjaness (or would the correct term be mall-ninjutsu?) in the author, that's for sure.
-
@WoodsDuck said:
One thing we know for sure is this was definitely not a paid advertisement disguised as a review.;)
Thank you
,saved me from saying it! -
@Fortytwo said:
Did he also just say that Vic uses SS liners?Victorinox houses its stainless steel tools in stainless steel liners backed by stainless steel springs.
His attitude to the glass-breaker makes me think he's seen a bit to many action-movies.
the glass breaker could save crucial seconds should you ever need to flee a building through locked or otherwise inaccessible doors or windows. Just look around any urban environment and imagine that every piece of glass is now an available exit.
In my world there's also the problem of the Boker not really knowing what it wants to be. Does it want to be the slightly more dressy knife with the wine opener? Or the survival type with line-cutter, G10 and glass breaker? There's a certain measure of mall-ninjaness (or would the correct term be mall-ninjutsu?) in the author, that's for sure.
+1
The reviewer talks about the tools you will barely ever need in a pocketknife (the glassbreaker and line cutter) and neglects to say that the SAK has the more useful every day tool set at half the cost. Also, who really cares about the steel type (apart from real enthusiasts)?
He downplays the ease with which SAK scales can be bought and replaced too - a lot cheaper than G10 (though G10 will be much more durable)
It would be interesting if he had included after-sales service as well. I'm not aware of Boker's policy but I bet it doesn't match Vic's.
-
Whilst not a s good as a Swiza :P :P :P the boker does have some interesting features. I do like the Opinel/leaf style blade and the covers/scales.
-
-
I would never make fun of a Swiss product !!

-
People who say "harder = better, end of story" don't know too much about steel, if they follow up with "steel type A is harder than steel type Y", they don't know too much about hardening either. ;) Japanese chef knives can have primitive carbon steels hardened to the upper half of the sixties in HRC, for instance. (Brittle as smurf, but slices sushi like a dream.)
("Steel type X will usually be hardened to...", "Steel type X can be hardened to ... without becoming brittle," etc, has a little more connection to reality.)
Edit: I'd generally prefer 12C27 over DIN 1.4110, this was just meant as a jab at the reviewer.
-
@Steinar said:
People who say "harder = better, end of story" don't know too much about steel, if they follow up with "steel type A is harder than steel type Y", they don't know too much about hardening either. ;) Japanese chef knives can have primitive carbon steels hardened to the upper half of the sixties in HRC, for instance. (Brittle as smurf, but slices sushi like a dream.)("Steel type X will usually be hardened to...", "Steel type X can be hardened to ... without becoming brittle," etc, has a little more connection to reality.)
Edit: I'd generally prefer 12C27 over DIN 1.4110, this was just meant as a jab at the reviewer.
Indeed, with that kind of logic you'd end up with blades made out of Coromant or other steels meant for milling inserts. Hard, oh yes, brittle, ridiculously so.
-
Off topic here, but is anyone else seeing Aloha's avatar missing and replaced in Etherealicer's avatar? Just to be clear I am seeing both of their avatars stacked in Etherealicer's avatar.

Probably just a glitch.
-
@captain spaulding said:
Off topic here, but is anyone else seeing Aloha's avatar missing and replaced in Etherealicer's avatar? Just to be clear I am seeing both of their avatars stacked in Etherealicer's avatar.
Probably just a glitch.
Did Ether hijack me. I'm seeing everything in it's place. -
Well, my tought are, that the Techtool is pretty interesting whit its own better blade and the Clip
But its no SAK Clone as Bòker dit also Multi Poketknifes long bevore..
Im a bit disapointet because no toothpick and twezer..
And as long böker dosnt do a Tech"champ" whit locking blade and t & t i dostnt want to put my Swisschamp XLT in the Shell of SAKs..
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login