Boker > SAK
-
Off topic here, but is anyone else seeing Aloha's avatar missing and replaced in Etherealicer's avatar? Just to be clear I am seeing both of their avatars stacked in Etherealicer's avatar.

Probably just a glitch.
-
@captain spaulding said:
Off topic here, but is anyone else seeing Aloha's avatar missing and replaced in Etherealicer's avatar? Just to be clear I am seeing both of their avatars stacked in Etherealicer's avatar.
Probably just a glitch.
Did Ether hijack me. I'm seeing everything in it's place. -
Well, my tought are, that the Techtool is pretty interesting whit its own better blade and the Clip
But its no SAK Clone as Bòker dit also Multi Poketknifes long bevore..
Im a bit disapointet because no toothpick and twezer..
And as long böker dosnt do a Tech"champ" whit locking blade and t & t i dostnt want to put my Swisschamp XLT in the Shell of SAKs.. -
@captain spaulding said:
Off topic here, but is anyone else seeing Aloha's avatar missing and replaced in Etherealicer's avatar? Just to be clear I am seeing both of their avatars stacked in Etherealicer's avatar.

Probably just a glitch.
Did Ether hijack me. I'm seeing everything in it's place.No, I'm in the process of hacking the captain... so ultimately for him every picture in the whole wide web will be replaced with my avatar... >:D
-
@captain spaulding said:
Off topic here, but is anyone else seeing Aloha's avatar missing and replaced in Etherealicer's avatar? Just to be clear I am seeing both of their avatars stacked in Etherealicer's avatar.

Probably just a glitch.
Did Ether hijack me. I'm seeing everything in it's place.No, I'm in the process of hacking the captain... so ultimately for him every picture in the whole wide web will be replaced with my avatar... >:D
He will never be able to see girly pictures again on the net - just etheralicer
-
I was gonna write a long post detailing inconsistencies etc but meh who cares. That review isn't going to make a difference to Joe blogs who doesn't know or have an opinion about knives like this. Joe will probably buy along the lines of "hey my dad had a red knife with a cross on...I'll get one of them" or he will just buy any old junk and not care. Serious knife enthusiasts know it's a smurf review, and mall ninjas want folding tomahawks that have concealed katanas in the handles not T&T...so in short...meh hope he enjoys his paycheck.
Sent from my SM-G900F using Tapatalk
-
@captain spaulding said:
Off topic here, but is anyone else seeing Aloha's avatar missing and replaced in Etherealicer's avatar? Just to be clear I am seeing both of their avatars stacked in Etherealicer's avatar.

Probably just a glitch.
Did Ether hijack me. I'm seeing everything in it's place.No, I'm in the process of hacking the captain... so ultimately for him every picture in the whole wide web will be replaced with my avatar... >:D
Your falling right into my trap.
:D
-
@Etherealicer said:
Since I carried a CityTool 3 during the off-brand-challenge**Blade **is awesome, for me the best MT blade I have handled. I'm in love with that blade.
**Scales **are niceRescue thingy is scary and useless. Useless as a screwdriver because when using it you risk your limbs. Useless as rescue blade because it does not cut well enough.
**Scissors **are good at medium stuff (zip-ties etc) but fail at thin soft stuffOverall, the CityTool is pretty nice. For me if they replace that rescue-thingy with an awl or something, and tweak the scissors a bit, it becomes a true alternative to a SAK. And don't compare it to the Swiza, the Böker is far better than the Swiza.
My thoughts are pretty much the same. I have the Outdoor 6, so I can report the saw works as well as the SAK. The only minor gripe I have is that I wish the mini-driver would fit the corkscrew. The pitch looks the same, but it looks like the diameter of the stock is a bit thicker. I might try to alter one to fit.
-
I can see where the reviewer is coming from. I do think Böker has some good ideas here-- the G10, belt clip, overall design, ergos, materials, I think edge out Victorinox' offerings. A few little design changes (dump the useless screwdriver at the end of the serrated blade, improve the scissors, get a Philips in there somewhere) and bring fit & finish up a notch, and Vic will have some serious competition. Or let Victorinox borrow a few ideas-- scales, asymmetrical handle profile, belt clip-- and it's game over for Böker.
-
@Etherealicer said:
Since I carried a CityTool 3 during the off-brand-challenge**Blade **is awesome, for me the best MT blade I have handled. I'm in love with that blade.
**Scales **are niceRescue thingy is scary and useless. Useless as a screwdriver because when using it you risk your limbs. Useless as rescue blade because it does not cut well enough.
**Scissors **are good at medium stuff (zip-ties etc) but fail at thin soft stuffOverall, the CityTool is pretty nice. For me if they replace that rescue-thingy with an awl or something, and tweak the scissors a bit, it becomes a true alternative to a SAK. And don't compare it to the Swiza, the Böker is far better than the Swiza.
Based on this I just ordered one out.

-
Since I carried a CityTool 3 during the off-brand-challenge
**Blade **is awesome, for me the best MT blade I have handled. I'm in love with that blade.
**Scales **are niceRescue thingy is scary and useless. Useless as a screwdriver because when using it you risk your limbs. Useless as rescue blade because it does not cut well enough.
**Scissors **are good at medium stuff (zip-ties etc) but fail at thin soft stuffOverall, the CityTool is pretty nice. For me if they replace that rescue-thingy with an awl or something, and tweak the scissors a bit, it becomes a true alternative to a SAK. And don't compare it to the Swiza, the Böker is far better than the Swiza.
Based on this I just ordered one out.

I stand by my assessment... a bad reviewer does not make a bad tool

The city tool has great potential and I like it
more can be found:
Böker City Tool 3 - thoughts after 3 weeks of use
Off-Brand Challenge - ETHEREALICER - Böker City Tool -
Just got in a Boker Tech Tool City 4. Feels good in the hand, and the fit and finish inside are also decent. Thanks for the recommendation.

-
looks quite robust. and yeah, the blade geometry will be perfect for cutting through fruits and vegetables. I like it
-
Yeah, he's not that well-informed on SAKs. At the very least, he could have picked a comparably-priced SAK with a tool set he liked that cost the same as the Boker.
However, he did make some fair points:
- Better blade steel. I bet Vic uses the softer steel for reasons other than cost. Like the fact that sometimes it bends instead of breaks, leading to fewer service tickets. But we should remember that Vic gave it a try with a harder blade steel in the 80s with the Mauser.
- Pocket clip. Precious few SAKs have them, even though they're quite useful.
- Scale material. Yeah, Vic has alox, but I don't think even that is comparable to G10, as far as resilience and grippability when wet.
- Assembled with Torx screws instead of rivets.
He also kind of missed the point when he started the article by saying how slick SAKs are, then knocked them later for not being grippy enough. The slickness is part of what makes them so nice to POCKET carry. No one tears up their pockets with SAKs, like the tactical folder guys do.
One other thing to remember is that articles with attention-grabbing titles get more views than those with boring ones. So he was intentionally being dramatic in the way he phrased his question.
-
Clickbaiting. I don't care about reviews based upon looks and half an hour of using. Especially if written by someone who doubts the usefulness of tweezers and toothpicks 'cause he lacks imagination. And doesn't even bother to look a bit closer and check on materials.
Victorinox houses its stainless steel tools in stainless steel liners backed by stainless steel springs.
And finally good luck with the glass breaker on an ordinary glass door or window.
TomcatPS: The Böker isn't a bad tool. Give it a couple of years of refining and we'll have more fun together. Right now it seemed good and reliable, but just didn't make it into my edc rotation.
-
@ColoSwiss said:
Thought about picking up one of the Bokers for the collection, until I found out the Tech-Tools are made in China. That killed it for me.Chinese are fully capable of producing a quality product. It only depends on their quality control department, and how closely it is supervised by the mothership. :)
The best tea pot I've ever seen was Chinese. It was top quality ceramic, and had an airtight fit between the lid and pot. Having been to China several times to visit my wife when we were courting, I saw that a lot of the high quality stuff they have there isn't exported, since when people think 'China' they think 'cheap' and 'low quality.'
So basically, don't give up just based on the country of manufacture, but certainly keep your eyes open for signs of quality. (or lack thereof)
-
Thought about picking up one of the Bokers for the collection, until I found out the Tech-Tools are made in China. That killed it for me.
Chinese are fully capable of producing a quality product. It only depends on their quality control department, and how closely it is supervised by the mothership. :)
The best tea pot I've ever seen was Chinese. It was top quality ceramic, and had an airtight fit between the lid and pot. Having been to China several times to visit my wife when we were courting, I saw that a lot of the high quality stuff they have there isn't exported, since when people think 'China' they think 'cheap' and 'low quality.'
So basically, don't give up just based on the country of manufacture, but certainly keep your eyes open for signs of quality. (or lack thereof)
What you say is true. The sad part is that since companies know that China=cheap/low quality in the eyes of their customers they don't even try getting anything of high quality. Instead they inform the Chinese of how little they are willing to pay and the Chinese send back goods with a quality level in accordance to this.
-
Curious on what Boker will be like, say, 50 years down the road. I'm sure my Vics can still be used/abused 50 years from now and the company will still be churning up pocket knives just like how they've been doing the last 50 years.
Yeah, that China thing is a little tricky. You guys are right in saying that you'll get what you pay for regarding anything made in China. Plus there are anecdotes from people who plan to manufacture stuff in China that, before the ink dries from a contract, someone has photographed their prototype and would be releasing copies of the item already. Though that's a topic for another discussion all together.
-
Another one of those threads.....

The Byrd line of Spyderco is made in China, so are RR and most electronics (Casio?). The Chinese will give you what you ask for. I think most people still assume that China has just one small factory in someones basement.
The SOG Powerduo and Gerber dime are made in China, have serious issues but SOG and Gerber are happy with them, so it must be what they ordered, not the Chinese taking advantage of poor US companies.
You can get dodgy products from any country. The Swiza is Swiss made but seems to have some issues, VAG has emission problems and it is German, and many US cars are known for questionable quality (remember the car industry meltdown from a few years ago?). Bear ans sons are US made and so are GEC. It does not mean they are of the same quality.
Specify what you want, research and install QA first and then QC.
And, I have not bought a Boker in several years. A backspring broke for no reason, in one of their plus, Chinese, line slipjoints, I contacted Boker in Germany, twice I think, through their official email and they have not bothered to reply.
So I just do not buy any of their products, irrespective of where they are made.
Blame the company that sells you the bad product, not the country that makes them.
-
I received both of mine in today. I picked up the #5 and #6. The #5 is like a Deluxe Tinker and the #6 reminds me of the 108mm GAK and/or Farmer.
My initial thoughts are that they are impressive and the tools are all thicker than the 91mm tools. The bottle opener / large flathead is the same size as the 91mm flathead but it's thicker than the 93mm flathead.
The #6 would be my go to for the outdoors while the #5 is a good alternative to the Deluxe Tinker. The scissors on mine cut everything even loose paper and plastic.
I did notice that the tools aren't as snappy as Victorinox but they are very nice anyways.
For me being in Law Enforcement I actually like the seat belt cutter and glass breaker. I wish the Philips on the seat belt cutter was placed elsewhere but I'll make do.
Here's some comparison pics:
Sent from my electronic multi-tool.




Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login