The SwissTool owners club
-
@SAK Guy said:
My pouch is here....waiting on the bit set.Sooooo, when you buy the bit set with six bits, how do you get the rest of the bits for the holder....buy the bike tool?
Normal size bits. You can buy separately, buy some screw driver using bits (often have wide set of bits included). Hardware stores and big markets usually have wide selection. I actually use 4 included bits and others replaced. So having 4 hex and 6 torx at the moment. Example:

(this for electric screw driver / drill. Set costs from under ten upwards). -
My pouch is here....waiting on the bit set.
Sooooo, when you buy the bit set with six bits, how do you get the rest of the bits for the holder....buy the bike tool?
Normal size bits. You can buy separately, buy some screw driver using bits (often have wide set of bits included). Hardware stores and big markets usually have wide selection. I actually use 4 included bits and others replaced. So having 4 hex and 6 torx at the moment. Example:

(this for electric screw driver / drill. Set costs from under ten upwards).Thanks Temo!!!

I was thinking it was a special bit size like the cyber tool!

I have those type bits with my screw gun.....

-
My pouch is here....waiting on the bit set.
Sooooo, when you buy the bit set with six bits, how do you get the rest of the bits for the holder....buy the bike tool?
Normal size bits. You can buy separately, buy some screw driver using bits (often have wide set of bits included). Hardware stores and big markets usually have wide selection. I actually use 4 included bits and others replaced. So having 4 hex and 6 torx at the moment. Example:

(this for electric screw driver / drill. Set costs from under ten upwards).Thanks Temo!!!

I was thinking it was a special bit size like the cyber tool!

I have those type bits with my screw gun.....

A good kit SG, I have the bits and ratchet in my small tool bag that goes from whatever vehicle/machine that I'm on at any given time. I also have a set of driver bits which effectively turns the kit into a small socket set. The LM bit extender accepts the standard 1/4" drive bits also.


-
Some sort of driver belt is what I need :) Would go with vic plus and with LM adapter. Maybe should look some ammo belt where use bits instead ammo. Bits are not large but good carry option (with MT) is harder to find. Maybe I am just too picky with carry items.
-
My pouch is here....waiting on the bit set.
Sooooo, when you buy the bit set with six bits, how do you get the rest of the bits for the holder....buy the bike tool?
Normal size bits. You can buy separately, buy some screw driver using bits (often have wide set of bits included). Hardware stores and big markets usually have wide selection. I actually use 4 included bits and others replaced. So having 4 hex and 6 torx at the moment. Example:

(this for electric screw driver / drill. Set costs from under ten upwards).Thanks Temo!!!

I was thinking it was a special bit size like the cyber tool!

I have those type bits with my screw gun.....

A good kit SG, I have the bits and ratchet in my small tool bag that goes from whatever vehicle/machine that I'm on at any given time. I also have a set of driver bits which effectively turns the kit into a small socket set. The LM bit extender accepts the standard 1/4" drive bits also.

Great idea...thanks for the info T!!! 
-
Got it together....now, looking at extra bits!!


-
Congrats SG. There are so many options for bits and sockets that will suit the Vic L wrench. The hard part will be how to carry all those options :D.
-
The ratchet and extension are excellent, they fit all standard 1/4" bits. I used my Spirit and ratchet/bit kit to tune up a big set of cabinets in a new kitchen, even using the awl to start pilot holes, and the extension on the handle end of the ratchet for some hard to reach screws. If you outfit the kit with all the bits you need for what you normally run into, it's a great setup and very compact. :)
-
I really don't see why not especially when ratchet it combined with extender. I love being able to use sockets with my L wrench. I also use a Snap on 1/4 breaker bar as well that works outstanding. I'll get pics up shortly.
-
That is one classy looking setup there SAKGuy!
-
@Barry Rowland said:
That is one classy looking setup there SAKGuy!Tester tools on the way my friend. I sent a nice selection to play with.
-
Congrats SG. There are so many options for bits and sockets that will suit the Vic L wrench. The hard part will be how to carry all those options :D.
Thx Aloha!! Will those options work with the ratchet as well? Mine has that and an extender.
Here are some drivers I use. I got the Vic L wrench in a plus kit with a Swisstool and love it. You can add whatever 1/4in bits you desire since the holder only came with 6 yet there is space for 10. I use the generic extender with the Vic wrench for additional reach. I feel the L wrench is the way to go when using sockets. The Red generic L wrench was cheap but I use it as well. The paracord ratchet is ok, I forget where I got it. It works when I need to turn longer screws and don't want to use my MT or have a dedicated driver.
The Vic and generic L wrench both hold LM bits BTW. The PW2 works with the generic extender an holds it very tight. I was surprised it held so well and the extender didn't slip thru. Its not the most ergo tool when using it as a bit/socket driver but it will work when you have lots of space to work.
I got the Kobalt set for $10 on sale, the little ratchet works good and has 5/16 end which is nice. The SnapOn 1/4 is awesome and works well especially with sockets.




-
Thank you!! You have a cool set up!!!

-
Thanks SG

Twiliter nice set up. I've picked up pieces as I've been in situations where I said dang it I wish I had {{BLANK}} on me. I've been on the look out for more SnapOn 1/4 drives/ratchets.
-
You have a cool set up!!!

+1 Nice kit Aloha!

Mine is less comprehensive (so far)... :)
Awesome T!!!

Thx SG!

Twiliter nice set up. I've picked up pieces as I've been in situations where I said dang it I wish I had {{BLANK}} on me. I've been on the look out for more SnapOn 1/4 drives/ratchets.
Thx Aloha!

I know what you mean there, my rolling cabinet has a huge accumulation of stuff like that, I like having the tools I need. My little tool bag is more about portability and doing more with less, so it's pretty bare bones. :)
-
@ Twiiliter I hear you on that. I try to keep my truck tool kit small and effective as well but
it does tend to grow beyond small at times. On person kit is usually LM bit kit with appropriate MT and extender.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
