Gerber Mp600 owners club ;)
-
It was actually with a MP700 not MP600, but either way I'd prefer the 600 to have standard jaws
That being said..... I still do actually like the MP700, but there isn't the option for an alternate plier head on that tool. I have also learnt my lesson and try to pay more attention if using the main gripping area ;)
-
I've found the standard (non-carbide) cutters to work great. I prefer them, which is why I bought the standard stainless version.
-
@50ft-trad said:
I'm really close to snagging a bladeless MP600. I think it would be a good compliment to carrying a folder

The bladeless MP425 mod is perfect with a dedicated folder.
The bladeless 600 would do the same in a larger package. I need to get myself one as well.I think the only snag with the official bladeless 600 is the replacable cutters. Shame they didn't go with a standard plier head IMHO
I agree

Sent from my SM-G920R4 using Tapatalk
-
I'm really close to snagging a bladeless MP600. I think it would be a good compliment to carrying a folder

The bladeless MP425 mod is perfect with a dedicated folder.
The bladeless 600 would do the same in a larger package. I need to get myself one as well.I'm surprised you don't have one [emoji14]ok:
Sent from my SM-G920R4 using Tapatalk
-
I'm really close to snagging a bladeless MP600. I think it would be a good compliment to carrying a folder

The bladeless MP425 mod is perfect with a dedicated folder.
The bladeless 600 would do the same in a larger package. I need to get myself one as well.I'm surprised you don't have one [emoji14]ok:
Sent from my SM-G920R4 using Tapatalk
Me too. ;)
-
Managed to cobble together one more MP600 out of the remains of the junkers I bought to modify my Pro Scout and MP400.

-
Just outta the box, didn't even clean the grease off yet!


-
Just outta the box, didn't even clean the grease off yet!


Is this your first flicky? It's addictive to flick them [emoji6]
That it is. I've annoyed bosses quite a bit flicking at work. >:D. Very nice SAK Guy!

Yes Monrogue!

Thanks JD! I'm working on my technique! :D
-
I may have to make my Franken-Gerber bladeless for my new job. Strict no knife policy, but I want to carry a MT.
I may have to buy the bladeless Rebar after all. :D
-
Just outta the box, didn't even clean the grease off yet!


Is this your first flicky? It's addictive to flick them [emoji6]
That it is. I've annoyed bosses quite a bit flicking at work. >:D. Very nice SAK Guy!

Yes Monrogue!

Thanks JD! I'm working on my technique! :D
With the tool flat, hold the end of the outside handle. Give the tool a sharp flick to the outside with your wrist, and the pliers will pop out.
-
I'm joining with another entry; just placed the order for a MP600 Pro Scout yesterday. My other one is the MP600 bladeless.
@lowtech said:
The problem being is that it´s hard to find U-shank blades in general and ones with the hole and adequate thickness even more so. At least here in germany.
If you have a good source, let me know.We have a good selection of Bosch U-shank blades here in the US. Maybe not quite as many as T-shank but enough to have something useful. If you want some badly enough to ship them from the US, drop me a PM or email and I'll go pick some up for you.
I went for the PS because it is US-made and I like the tool combo and the fact that it has the old style wire cutter.
-
@jerseydevil said:
With the tool flat, hold the end of the outside handle. Give the tool a sharp flick to the outside with your wrist, and the pliers will pop out.There's also the other way, the way that Leatherman recommends for their models with the slide-out pliers.
Hold with the thumb and forefinger on the release buttons, with the tool handles down. Then press the buttons and flick it downward, so the handles drop away from the plier head.
Since the handles with tools are heavier than the plier head, this method works with a lot less speed and force, it's more reliable for me.
-
With the tool flat, hold the end of the outside handle. Give the tool a sharp flick to the outside with your wrist, and the pliers will pop out.
There's also the other way, the way that Leatherman recommends for their models with the slide-out pliers.
Hold with the thumb and forefinger on the release buttons, with the tool handles down. Then press the buttons and flick it downward, so the handles drop away from the plier head.
Since the handles with tools are heavier than the plier head, this method works with a lot less speed and force, it's more reliable for me.
True, that works well also. They're just so fun to flick the way I posted that I rarely open them in any other way. :)
-
With the tool flat, hold the end of the outside handle. Give the tool a sharp flick to the outside with your wrist, and the pliers will pop out.
There's also the other way, the way that Leatherman recommends for their models with the slide-out pliers.
Hold with the thumb and forefinger on the release buttons, with the tool handles down. Then press the buttons and flick it downward, so the handles drop away from the plier head.
Since the handles with tools are heavier than the plier head, this method works with a lot less speed and force, it's more reliable for me.
True, that works well also. They're just so fun to flick the way I posted that I rarely open them in any other way. :)
Same here[emoji16]
Sent from my SM-G920R4 using Tapatalk
-
I have a Pro Scout with a chipped flat driver and the plier tips that have become misaligned. Do you guys think Gerber would cover these under its warranty?
--
@jerseydevil said:
True, that works well also. They're just so fun to flick the way I posted that I rarely open them in any other way. :)I love flicking the pliers outward. It just feels awesome. The multitool equivalent of

and you can't do it with a Leatherman! That said, I worry that they'll get too "loose" if I do this (rather than using the slider buttons).
-
@NetsNJ said:
I have a Pro Scout with a chipped flat driver and the plier tips that have become misaligned. Do you guys think Gerber would cover these under its warranty?--
True, that works well also. They're just so fun to flick the way I posted that I rarely open them in any other way. :)
I love flicking the pliers outward. It just feels awesome. The multitool equivalent of

and you can't do it with a Leatherman! That said, I worry that they'll get too "loose" if I do this (rather than using the slider buttons).
Wait, are you flicking it open without depressing the buttons? That shouldn't happen.
Gerber should cover your Pro Scout. More than likely they will just send you a new one.
-
I have a Pro Scout with a chipped flat driver and the plier tips that have become misaligned. Do you guys think Gerber would cover these under its warranty?
--
True, that works well also. They're just so fun to flick the way I posted that I rarely open them in any other way. :)
I love flicking the pliers outward. It just feels awesome. The multitool equivalent of

and you can't do it with a Leatherman! That said, I worry that they'll get too "loose" if I do this (rather than using the slider buttons).
Wait, are you flicking it open without depressing the buttons? That shouldn't happen.
Gerber should cover your Pro Scout. More than likely they will just send you a new one.
Mine works that way...the buttons only have to be depressed to retract the pliers.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login