Show us your fixed blades
-
-
Here is another of my Randalls.This happens to be one of the smallest,as far as blade length is concerned.
It is a Model 11 3 1/4 Alaskan Skinner.As the name indicates it has a 3 1/4" blade made from stainless steel.It's also equipped with thumb notches,nickel silver single hilt,black and aluminum spacers,a generous Sambar stag handle and finished with an aluminum butt cap.
-
@hiraethus said:
Finished the Elver the other night.



Decided just to sand the handle and leave it un-waxed/oiled. Went to 800 grit wet and dry and it's lovely and smooth in the hand. Great shape to the handles and the blade's not too big. Lovely sheath too.What is the story with this knife? Never heard of an Elver before.
-
@HarleyXJGuy said:
What is the story with this knife? Never heard of an Elver before.Read reply #2582 and it will explain it.
-
-
Couple 8) lookers there.
:) -
Beautiful!!!

-
Oh yes

I do like a bit of Stag

-
I just looked more closely at the etching on the first pic. 10 Rockwell seems a bit soft :P

I'll get my coat......

-
@HarleyXJGuy said:
What is the story with this knife? Never heard of an Elver before.It's made by Enzo, a Finnish knife maker. They make all sorts of nice fixed and folding knives - you can see them here: http://brisa.fi/enzo.html - and they also make kits where you get the blade and either pre-machined handles or blocks of the handle material to finish yourself. The Elver is their smallest full size knife kit (they also make some neck knives) and they seem to be pretty good value at just 60 euros ($65) for the blade, screws, handles and sheath. The finished knife is 95 euros (or £85 in this country ::)).
-
What is the story with this knife? Never heard of an Elver before.
It's made by Enzo, a Finnish knife maker. They make all sorts of nice fixed and folding knives - you can see them here: http://brisa.fi/enzo.html - and they also make kits where you get the blade and either pre-machined handles or blocks of the handle material to finish yourself. The Elver is their smallest full size knife kit (they also make some neck knives) and they seem to be pretty good value at just 60 euros ($65) for the blade, screws, handles and sheath. The finished knife is 95 euros (or £85 in this country ::)).
How is it possible I have never seen this?
Why yes I would love to make my own knife.
-
What is the story with this knife? Never heard of an Elver before.
It's made by Enzo, a Finnish knife maker. They make all sorts of nice fixed and folding knives - you can see them here: http://brisa.fi/enzo.html - and they also make kits where you get the blade and either pre-machined handles or blocks of the handle material to finish yourself. The Elver is their smallest full size knife kit (they also make some neck knives) and they seem to be pretty good value at just 60 euros ($65) for the blade, screws, handles and sheath. The finished knife is 95 euros (or £85 in this country ::)).
How is it possible I have never seen this?
Why yes I would love to make my own knife.
I would imagine that fighting for truth, justice and the American way takes a lot of your free time......

-
What is the story with this knife? Never heard of an Elver before.
It's made by Enzo, a Finnish knife maker. They make all sorts of nice fixed and folding knives - you can see them here: http://brisa.fi/enzo.html - and they also make kits where you get the blade and either pre-machined handles or blocks of the handle material to finish yourself. The Elver is their smallest full size knife kit (they also make some neck knives) and they seem to be pretty good value at just 60 euros ($65) for the blade, screws, handles and sheath. The finished knife is 95 euros (or £85 in this country ::)).
How is it possible I have never seen this?
Why yes I would love to make my own knife.
I would imagine that fighting for truth, justice and the American way takes a lot of your free time......

Good point.
Saving Murica is a full time gig.
-
I'm sure they have US dealers if you wanted to give it a go - and there must be similar products from other manufacturers out there too. You really should try it, you know.

-
@hiraethus said:
I'm sure they have US dealers if you wanted to give it a go - and there must be similar products from other manufacturers out there too. You really should try it, you know.
I checked out the website and they ship to the US.
Intend to do one once this move is over.
Leaving Texas in a little under a month.
-
Nice. Keep us posted.

-
Camillus BK2 :)
-
@toolguy said:
This is another Randall Made knife.It's a model 21 Little Game with a SS blade,thumb notches,single brass hilt,brass and black spacers and a Sambar Stag handle.It's finished with a brass butt cap and thong hole.Altogether it's an attractive and compact knife.
Another nice Randall TG! 8)
Camillus BK2 :)
That BK2 is a brute and there's probably nothing that knife couldn't do.
Congrats David.
Thank you TG. The Camillus BK2 has a thinner blade than the Ka-Bar BK2. Its still a solid knife. :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



